Samsung EO-SG710 User manual

www.samsung.com
User Manual
12/2016. Rev.1.4
Wireless Speaker Bottle Design
EO-SG710

Table of Contents
English (UK)
Français
Deutsch
Italiano
Español
Magyar
Polski
Română
Български
Hrvatski
Srpski
Português
Latviešu
Lietuvių kalba
Eesti
Nederlands
Svenska
Norsk
Suomi
Dansk
Ελληνικά
Slovenščina
Slovenčina
Čeština
Türkçe


Русский
Українська
Қазақ тілі
English (USA)
Español (Castellano)
简体中文
繁體中文(台灣)
Français (Canada)
Português (Brasil)
한국어

3
Getting started
Read me first
Please read this manual before using the device to ensure safe and proper use.
•
Images may differ in appearance from the actual product. Content is subject to change
without prior notice.
•
Before using the Bluetooth speaker, make sure it is compatible with your device.
•
The Bluetooth speaker is compatible with Wireless Power Consortium (WPC) certified
devices.
Instructional icons
Warning: situations that could cause injury to yourself or others
Caution: situations that could cause damage to your device or other equipment
Notice: notes, usage tips, or additional information
English (UK)
1

Getting started
4
Package contents
Check the product box for the following items:
•
Bluetooth speaker
•
Quick start guide
•
The items supplied with the device and any available accessories may vary
depending on the region or service provider.
•
The supplied items are designed only for this device and may not be compatible
with other devices.
•
Appearances and specifications are subject to change without prior notice.
•
You can purchase additional accessories from your local Samsung retailer. Make
sure they are compatible with the device before purchase.
•
Use only Samsung-approved accessories. Using unapproved accessories may cause
the performance problems and malfunctions that are not covered by the warranty.
•
Availability of all accessories is subject to change depending entirely on
manufacturing companies. For more information about available accessories, refer
to the Samsung website.
English (UK)
2

Getting started
5
Device layout
Lamp
Power/Play button
(Indicator light)
Bluetooth pairing
button
Audio cable jack
Charger port
Wireless charging pad
Speaker
Handle
Volume (-) button
Volume (+) button
Lamp brightness
adjustment button
Lamp brightness
adjustment button
English (UK)
3

Getting started
6
Buttons
Button Function
Power/Play button
•
Press and hold to turn the Bluetooth speaker on or off.
•
Press to play or pause music.
•
If your Bluetooth speaker is frozen and unresponsive, press
and hold for approximately eight seconds to turn off the
Bluetooth speaker.
Volume (+) button
•
Press to increase the volume during music playback.
•
Press and hold to skip to the next song during music
playback.
Volume (-) button
•
Press to decrease the volume during music playback.
•
Press and hold to skip to the previous song during music
playback.
Lamp brightness
adjustment button
•
Adjust the lamp brightness.
Bluetooth pairing
button
•
Press and hold to enter Bluetooth pairing mode.
•
While in Bluetooth pairing mode, press to end the mode.
•
When the connection is lost, press to reconnect devices.
Indicator light
The indicator light alerts you to the Bluetooth speaker’s status.
Colour Status
Flashes blue three
times The Bluetooth speaker is powering on
Flashes red three times The Bluetooth speaker is powering off
Continuously red Charging
Continuously blue Fully charged
Flashes red and blue Bluetooth pairing mode
English (UK)
4

Getting started
7
Colour Status
Quickly flashes blue
three times Connected via Bluetooth
Quickly flashes red
three times Connected via Bluetooth (when the battery is low)
Flashes red every four
seconds The battery is low
If the indicator light does not work as described, disconnect the charger from the
Bluetooth speaker and reconnect it.
Charging the battery
Battery charging tips and precautions
•
You can charge the Bluetooth speaker using the charger (sold separately).
•
If the battery is completely discharged, the Bluetooth speaker cannot be turned on
immediately when the charger is connected. Allow a depleted battery to charge for a few
minutes before turning on the Bluetooth speaker.
•
Using a power source other than the charger, such as a computer, may result in a slower
charging speed due to a lower electric current.
•
The Bluetooth speaker can be used while it is charging, but it may take longer to fully
charge the battery.
•
If the Bluetooth speaker receives an unstable power supply while charging, it may not
function. If this happens, unplug the charger from the Bluetooth speaker.
•
While charging, the Bluetooth speaker and the charger may heat up. This is normal and
should not affect the Bluetooth speaker’s lifespan or performance. If the battery gets
hotter than usual, the charger may stop charging.
•
If the Bluetooth speaker is not charging properly, take the Bluetooth speaker and the
charger to a Samsung Service Centre.
•
The charging time may vary depending on the charger specification.
English (UK)
5

Getting started
8
Wired charging
Charge the Bluetooth speaker before using it for the first time or when it has been unused for
extended periods.
Use only Samsung-approved chargers (more than 5V/1A for wired charging, more
than 5V/2A for wireless charging). Unapproved chargers can cause the battery to
explode or damage the Bluetooth speaker.
1 Connect the Bluetooth speaker to a charger.
Connecting the charger improperly may cause serious damage to the Bluetooth
speaker. Any damage caused by misuse is not covered by the warranty.
2 After fully charging, disconnect the Bluetooth speaker from the charger.
•
To save energy, unplug the charger when not in use. The charger does not have a
power switch, so you must unplug the charger from the electric socket when not in
use to avoid wasting power. The charger should remain close to the electric socket
and be easily accessible while charging.
•
The socket-outlet shall be installed near the equipment and shall be easily
accessible.
English (UK)
6

Getting started
9
Wireless charging
The Bluetooth speaker has a built-in wireless charging coil. You can charge the battery using a
wireless charger (sold separately).
1 Place the Bluetooth speaker’s bottom on the wireless charger.
2 After fully charging, disconnect the Bluetooth speaker from the wireless charger.
•
When there are foreign materials between the Bluetooth speaker and the wireless
charger, the Bluetooth speaker may not charge properly.
•
Use Samsung-approved wireless chargers. If you use other wireless chargers, the
battery may not charge properly.
English (UK)
7

Getting started
10
Checking the remaining battery power
When the Bluetooth speaker is connected to a mobile device via Bluetooth, you can check
the Bluetooth speaker’s battery level on the mobile device.
1 Pair the Bluetooth speaker to a mobile device.
2 On the connected mobile device, download and install the
Lux manager app.
You can download the
Lux manager app from Galaxy Apps or Play Store . If you are
using an iOS mobile device, you can download the app from Apple’s App Store.
3 On the Apps screen of the mobile device, tap
Lux manager .
If you are using an iOS mobile device, on the Home screen, tap
Lux manager .
4 On the connected mobile device, drag the status bar downwards to open the notification
panel.
If you are using an iOS mobile device, drag the status bar downwards to open the
notification centre.
You can check the Bluetooth speaker’s battery level.
If the Bluetooth speaker’s battery level is not shown, on the
Lux manager main screen, tap
→
Connection manager and tap your Bluetooth speaker’s name to connect to it.
Battery saving mode
The Bluetooth speaker has a power saving feature that conserves the battery power.
If the Bluetooth speaker is not used for more than 30 minutes, such as when music playback
is paused, the power saving feature will automatically activate and the speaker will be turned
off.
If the Bluetooth speaker is charging or connected to a device via an audio cable, the
power saving feature will not be activated.
English (UK)
8

11
Using the Bluetooth speaker
Turning the Bluetooth speaker on or off
Press and hold the Power/Play button to turn the Bluetooth speaker on or off.
When you turn on the Bluetooth speaker for the first time, the lamp turns on and it enters
Bluetooth pairing mode.
•
If your Bluetooth speaker is frozen and unresponsive, press and hold the Power/
Play button for approximately eight seconds.
•
Follow all posted warnings and directions from authorised personnel in areas
where the use of wireless devices is restricted, such as aeroplanes and hospitals.
Connecting to another device
Notices for using Bluetooth
Bluetooth is a wireless technology standard that uses a 2.4 GHz frequency to connect to
various devices over short distances. It can connect and exchange data with other Bluetooth
enabled devices, such as mobile devices, computers, printers, and other digital home
appliances, without connecting via cables.
•
To avoid problems when connecting your Bluetooth speaker to another device, place the
devices close to each other.
•
Ensure that your Bluetooth speaker and the other Bluetooth device are within
the Bluetooth connection range (10 m). The distance may vary depending on the
environment the devices are used in.
•
Ensure that there are no obstacles between the Bluetooth speaker and a connected
device, including human bodies, walls, corners, or fences.
•
Do not touch the Bluetooth antenna of a connected device.
English (UK)
9

Using the Bluetooth speaker
12
•
Bluetooth uses the same frequency as some industrial, scientific, medical, and low power
products and interference may occur when making connections near these types of
products.
•
Some devices, especially those that are not tested or approved by the Bluetooth SIG, may
be incompatible with your Bluetooth speaker.
•
Do not use the Bluetooth feature for illegal purposes (for example, pirating copies of files
or illegally tapping communications for commercial purposes).
Connecting via Bluetooth
Pair the Bluetooth speaker with a mobile device. Once the devices are paired, the Bluetooth
speaker will automatically connect to the mobile device whenever you turn on the Bluetooth
speaker.
1 Bluetooth speaker Press and hold the Bluetooth pairing button for more than three
seconds to enter Bluetooth pairing mode.
The indicator light will flash red and blue.
When you turn on the Bluetooth speaker for the first time, it enters Bluetooth pairing
mode.
2 Mobile device Activate the Bluetooth feature and search for Bluetooth devices.
For more information, refer to the other device’s user manual.
3 Mobile device Tap
[Speaker] Bottle Design (0000) from the list of available devices.
•
The PIN for the Bluetooth speaker is the four-digit number in parenthesis displayed
on the other device’s Bluetooth settings screen. The number differs depending on
the Bluetooth speaker.
•
If the Bluetooth connection fails or the other device cannot locate the Bluetooth
speaker, remove the device’s information from the other device’s list. Then, try to
connect again.
•
The Bluetooth connection range and sound quality may vary depending on the
connected devices.
English (UK)
10

Using the Bluetooth speaker
13
Disconnecting or reconnecting devices
You can end the current connection by pressing and holding the Bluetooth speaker’s
Bluetooth pairing button for approximately three seconds.
If the Bluetooth connection ends due to the distance between the devices, bring the devices
closer together within a certain period of time. The devices will automatically reconnect.
•
You can also end the connection by turning off the Bluetooth speaker or
deactivating the Bluetooth feature on the connected device. When you turn on
the Bluetooth speaker again and the devices are in range, or activate the Bluetooth
feature on the connected device, the devices will automatically reconnect.
•
If the Bluetooth connection ends because of a device malfunction, use the
Bluetooth menu on the disconnected device to reconnect the devices.
•
Noise may occur if the Bluetooth connection is disconnected improperly.
Connecting to other devices
After ending the connection between the Bluetooth speaker and the mobile device, you can
connect the Bluetooth speaker to other devices.
1 Press and hold the Bluetooth pairing button for approximately three seconds to end the
current connection and enter Bluetooth pairing mode.
2 Connect the Bluetooth speaker to another device.
English (UK)
11

Using the Bluetooth speaker
14
Connecting via an audio cable
Connect the Bluetooth speaker to a device via an audio cable. When the Bluetooth speaker is
connected via an audio cable, you can only adjust the volume.
1 Bluetooth speaker Plug the audio cable into the audio cable jack.
2 Other device Plug the other end of the audio cable into the audio output jack.
•
If the Bluetooth speaker is simultaneously connected to a device via an audio cable
and another device via Bluetooth, the Bluetooth speaker will only play audio from
the device connected via Bluetooth.
•
The audio cable jack is optimised for Samsung mobile devices. When you connect
the Bluetooth speaker to a device other than a Samsung mobile device, playback
may suddenly stop or feedback may occur depending on the volume. Adjust the
volume appropriately.
Listening to music
Listen to music played on the connected device.
Press the Power/Play button to play music.
Pausing or resuming playback
Press the Power/Play button to pause or resume playback.
Adjusting the volume
Press the Volume button to adjust the volume during playback.
Skipping to other songs
Press and hold the Volume (+) button to skip to the next song during playback.
Press and hold the Volume (-) button to skip to the previous song during playback.
English (UK)
12

Using the Bluetooth speaker
15
Using the lamp
Lux manager app introduction
To configure the lamp or use the additional lamp features, download and install the Lux
manager
app on your mobile device connected via Bluetooth. You can download the Lux
manager
app from Galaxy Apps or Play Store . If you are using an iOS mobile device, you can
download the app from Apple’s App Store.
On the Apps screen of the mobile device, tap
Lux manager . If you are using an iOS mobile
device, on the Home screen, tap
Lux manager .
The
Lux manager app will automatically connect to the Bluetooth speaker. If you are using an
iOS mobile device, tap your Bluetooth speaker’s name in the pop-up window.
If the app does not connect to your Bluetooth speaker, on the
Lux manager main screen, tap
→
Connection manager and tap your Bluetooth speaker’s name to manually connect to
it.
Colour icon
Colour screen icon
Adjust the lamp brightness.
Adjust the lamp brightness.
Access the Lux manager menu
screen.
Turn the lamp on or off.
English (UK)
13

Using the Bluetooth speaker
16
Adjusting the lamp brightness
1 On the Apps screen of the mobile device, tap
Lux manager .
If you are using an iOS mobile device, on the Home screen, tap
Lux manager .
2 Tap or to adjust the brightness.
Or, drag your finger up or down on the screen to adjust the brightness.
Adjusting the lamp brightness with the Bluetooth speaker
To adjust the lamp brightness using the Bluetooth speaker, press the Lamp brightness
adjustment button.
Or, you can use the Bluetooth speaker’s motion recognition feature. Tilt the Bluetooth speaker
by more than 100°. The brightness will gradually change. When the brightness changes to
the desired level, turn it upright again. When the lamp brightness does not change based
on motion, on the
Lux manager main screen, tap
→
Settings and tap the switch under
Motion UX to activate the motion recognition feature.
Changing the lamp colour
1 On the Apps screen of the mobile device, tap
Lux manager .
If you are using an iOS mobile device, on the Home screen, tap
Lux manager .
2 Swipe to the left or right to select a preset colour.
3 At the bottom of the colour screen, select a colour icon.
Alternatively, tap the desired colour on the screen.
The selected colour will be applied to the lamp.
English (UK)
14

Using the Bluetooth speaker
17
Selecting additional lamp colours
You can select additional lamp colours other than the preset colours.
1 On the Apps screen of the mobile device, tap
Lux manager .
If you are using an iOS mobile device, on the Home screen, tap
Lux manager .
2 Tap
→
My colour .
3 Tap the desired colour from the picker panel.
The selected colour will be applied to the lamp.
To save the selected colour, tap .
To remove the saved colour, tap and hold the saved colour icon.
Changing the lamp colour with the Bluetooth speaker
Use the Bluetooth speaker’s motion recognition feature.
Shake the Bluetooth speaker to change the lamp colour randomly. When the lamp brightness
and colour do not change based on motion, on the
Lux manager main screen, tap
→
Settings and tap the switch under Motion UX to activate the motion recognition feature.
Changing the lamp mode
You can change the lamp mode to produce various moods.
On the Apps screen of the mobile device, tap
Lux manager . If you are using an iOS mobile
device, on the Home screen, tap
Lux manager .
Tap and select one of the following.
Light wave
When you set the lamp mode to Light wave , the lamp colour will randomly change.
The icon will appear in the upper-right corner of the screen.
Breathing light
When you set the lamp mode to Breathing light , the lamp brightness will change
periodically so the lamp light will slowly pulse.
The icon will appear in the upper-right corner of the screen.
English (UK)
15

Using the Bluetooth speaker
18
Music light
When you set the lamp mode to Music light , the lamp brightness and colour will change
according to the music played. The colour will randomly change and the brightness will
change according to the volume of the music played.
The icon will appear in the upper-right corner of the screen.
Candle mode
When you set the lamp mode to Candle mode , the lamp light flickers naturally like a candle.
The icon will appear in the upper-right corner of the screen.
Using the sleep timer
You can set the lamp to turn off automatically at a preset time.
1 On the Apps screen of the mobile device, tap
Lux manager .
If you are using an iOS mobile device, on the Home screen, tap
Lux manager .
2 Tap
→
Sleep timer .
3 Set the timer and tap
Start .
At the preset time, the lamp and music will turn off.
English (UK)
16

Using the Bluetooth speaker
19
Configuring additional options
You can customise the settings for the Bluetooth speaker and the Lux manager app.
1 On the Apps screen of the mobile device, tap
Lux manager .
If you are using an iOS mobile device, on the Home screen, tap
Lux manager .
2 Tap
→
Settings .
Connection manager
Search for the Bluetooth speaker to connect or to view the currently connected Bluetooth
speaker’s information.
Motion UX
Activate the motion recognition feature to change the Bluetooth speaker’s lamp brightness
and colour.
Information
You can view app’s version information and open source licence. You can also view the user
manual.
English (UK)
17

20
Appendix
Troubleshooting
Before contacting a Samsung Service Centre, please attempt the following solutions.
Your Bluetooth speaker does not turn on
When the battery is completely discharged, your Bluetooth speaker will not turn on. Charge
the battery completely before turning on the Bluetooth speaker.
Your Bluetooth speaker freezes
If the Bluetooth speaker freezes or hangs, try to resolve it by turning off the Bluetooth speaker
and then turning it on again.
If the Bluetooth speaker is still unresponsive, end the Bluetooth connection and reconnect
it. To do this, press the Bluetooth pairing button for approximately three seconds. When the
Bluetooth speaker enters Bluetooth pairing mode, connect the devices again, and then check
the operation of the Bluetooth speaker.
If the problem is still not resolved, contact a Samsung Service Centre.
The battery does not charge properly (For Samsung-approved USB
cables and chargers)
Ensure that the USB cable or the charger is connected properly.
If the problem is still not resolved, contact a Samsung Service Centre.
English (UK)
18