Samsung SP43Q5 User manual

DIGITAL
TELEVISION
SP43W6
SP42Q2
SP43Q5
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
TELETEXT
SELF FOCUS
Register your product at www.samsung.com/global/register
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 1

S
p
sh
g
p
W
p
sh
m
sc
p
A
g
d
g
b
im
O
fo
B
ag
y
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 2

English - 3
Important Warranty Information Regarding Television
Format Viewing
Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are
primarily designed to view standard format full-motion video. The images displayed on them
should primarily be in the standard 4:3 ratio format and constantly moving. Displaying stationary
graphics and images on screen, such as the dark top and bottom letterbox bars (wide screen
pictures), should be limited to no more than 15% of the total television viewing per week.
Wide screen format televisions (16:9, the aspect ratio of the screen width to height) are
primarily designed to view wide screen format full-motion video. The images displayed on them
should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your
model offers this feature, and constantly moving. Displaying stationary graphics and images on
screen, such as the dark side-bars on non-expanded standard format television video and
programming, should be limited to no more than 15% of the total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video
game displays, station logos, web sites or computer graphics and patterns, should be limited as
described above for all televisions. Displaying any stationary images that exceed the above
guidelines can cause uneven aging of picture tubes (CRTs) that leave subtle, but permanent
burned-in ghost images in the television picture. To avoid this, vary the programming and
images, and primarily display full screen moving images, not stationary patterns or dark bars.
On television models that offer picture sizing features, use these controls to view the different
formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven CRT
aging as a result of format selection and use, as well as other burned-in images, is not covered by
your Samsung limited warranty.
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 3

English - 4
Contents
◆FOREWORD
■Important Warranty Information Regarding Television Format Viewing ........ 3
◆CONNECTING AND PREPARING YOUR TELEVISION
■Control Panels (depending on the model)..................................................... 6
■Connection Panels (depending on the model) .............................................. 7
■Using a Display Deck (depending on the model) .......................................... 8
■Inserting the Batteries in the Remote Control................................................ 8
■Infrared Remote Control ................................................................................ 9
■Connecting to an Aerial or Cable Television Network ................................... 10
■Connecting a Satellite Receiver or Decoder.................................................. 11
■Switching Your Television On and Off........................................................... 12
■Placing Your Television in Standby Mode..................................................... 12
■Becoming Familiar with the Remote Control ................................................. 13
■Plug and Play Feature................................................................................... 14
■Changing Channels....................................................................................... 16
■Displaying Information ................................................................................... 17
■Choosing Your Language.............................................................................. 17
■Adjusting the Screen Automatically (Self Focus)........................................... 18
■Deactivating the Automatic Execution of the Self Focus............................... 19
■Removing the “Self Focus” from the Display ................................................. 20
◆USING THE DTV FEATURE
■Previewing the DTV Menu System................................................................ 21
■Choosing Your Language.............................................................................. 22
■Adjusting the Translucency Level.................................................................. 23
■Updating the Channel List Automatically....................................................... 24
■Updating the Channel List Manually.............................................................. 25
■Editing Your Favourite Channels................................................................... 26
■Setting up the Parental Lock ......................................................................... 28
■Viewing EPG (Electronic Programme Guide) Information............................. 29
■Using the Scheduled List............................................................................... 30
■Setting the Default Guide .............................................................................. 32
■Viewing All Channels and Favourite Channels.............................................. 33
■Selecting Category Colours........................................................................... 34
■Viewing Channel Lists ................................................................................... 35
■Displaying Programme Information ............................................................... 35
■Using Your Preferred Features...................................................................... 36
■Viewing Product Information.......................................................................... 37
■Checking the Signal Information.................................................................... 37
■Upgrading the Software (Option)................................................................... 38
■Viewing Common Interface ........................................................................... 39
■Selecting the CI Menu ................................................................................... 40
■Resetting ....................................................................................................... 41
■Freezing the Current Picture ......................................................................... 41
◆SETTING THE CHANNELS (ANALOG TV)
■Storing Channels Automatically..................................................................... 42
■Sorting the Stored Channels ......................................................................... 43
■Storing Channels Manually............................................................................ 44
■Skipping Unwanted Channels ....................................................................... 46
■Assigning Names to Channels ...................................................................... 47
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 4

English - 5
Contents (continued)
◆SETTING THE CHANNELS (ANALOG TV) (continued)
■Locking the Channel...................................................................................... 48
■Fine Tuning Channel Reception.................................................................... 49
◆USING YOUR TELEVISION
■Using the LNA (Low Noise Amplifier) Feature............................................... 50
■Changing the Picture Standard ..................................................................... 51
■Customizing the Picture Settings................................................................... 52
■Selecting the Picture Size (Wide Model : Analog Mode) ............................... 54
■Selecting the Picture Size (Wide Model : DTV Mode) ................................... 56
■Selecting the Scan Mode............................................................................... 58
■Setting the Digital NR (Digital Noise Reduction) .......................................... 59
■Setting the Blue Screen ................................................................................ 60
■Changing the Sound Standard ...................................................................... 61
■Adjusting the Sound Settings ........................................................................ 62
■Extra Sound Settings..................................................................................... 63
-Auto Volume
-Dolby Virtual
■Setting the Melody Sound ............................................................................. 64
■Selecting the Sound Mode (depending on the model) .................................. 65
■Setting and Displaying the Current Time....................................................... 66
■Setting the Sleep Timer ................................................................................. 67
■Switching the Television On and Off Automatically ....................................... 68
■Viewing an External Signal Source ............................................................... 69
◆USING THE TELETEXT FEATURE
■Teletext Feature ............................................................................................ 70
■Displaying the Teletext Information ............................................................... 71
■Selecting Display Options.............................................................................. 72
■Selecting a Teletext Page.............................................................................. 73
■Storing Teletext Pages (depending on the model) ........................................ 74
◆ADDITIONAL INFORMATION ON CONNECTIONS
■Connecting to the External Input/Outputs...................................................... 75
■Connecting to the Common Interface............................................................ 76
■Connecting to the Audio Output .................................................................... 76
■Connecting to the RCA Input......................................................................... 77
■Connecting to the S-Video Input.................................................................... 78
■Connecting to the Component Input.............................................................. 79
■Redirecting an Input to the External Output .................................................. 80
◆RECOMMENDATIONS FOR USE
■Programming the Remote Control for Other Components ............................ 81
- VCR Remote Control Codes ....................................................................... 82
- Cable Box (CATV) Remote Control Codes ................................................. 82
- DVD Remote Control Codes ....................................................................... 82
■Troubleshooting: Before Contacting Service Personnel................................ 83
☛➢
Press Important Note
Symbols
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 5

English - 6
Control Panels (depending on the model)
➢
The actual configuration on your TV may be different, depending on
your model.
➢◆You can use the C/P. buttons to switch on the TV when it is in standby mode depending
on the model.
◆The - +and C/P. buttons have the same function as the ▲/▼/œ/√buttons
on the remote control in main menu mode.
◆If the remote control no longer works or your have misplaced, you can use controls on the panel of
the TV.
( a ) Input Source Selection
( b ) Menu Display
( c ) Accessing to the Selected Option
on the Menu System
( d ) Volume Adjustment
( e ) Channel Selection
( f ) Remote Control Sensor
( g ) Standby & Timer Indicator
( h ) Power On/Off
( i ) Picture On/Off
SP42Q2
SP43Q5
SP43W6
➢
➢
☛
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 6

English - 7
n
Connection Panels (depending on the model)
➢
The actual configuration on your TV may be different, depending on
your model.
Side of the TV
Rear of the TV
( a ) Video Input
( b ) Audio Input
( c ) S-Video Input
➢
◆ Please be sure to match the colour coded input terminals and cable jacks.
◆ For further details about connection, refer to pages 75~79.
☛Whenever you connect an audio or video system to your television, ensure that all elements are
switched off. Refer to the documentation supplied with your equipment for detailed connection
instructions and associated safety precautions.
Audio Output
75ΩCoaxial
Connector for Aerial
or Cable Network
Service Port
SCART Audio/Video
Input/Output
Common Interface
Component Input
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 7

English - 8
Using a Display Deck (depending on the model)
You can display a VCR or DVD Player, etc. by using the display
deck.
SP43W6
Inserting the Batteries in the Remote Control
You must insert or replace the batteries in the remote control when
you:
◆Purchase the television
◆Find that the remote control is no longer operating
correctly
1Remove the cover on the rear of the remote control by pressing
the symbol ( ) downwards and then pulling firmly to remove it.
2Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking
care to respect the polarities:
◆ + on the battery against + on the remote control
◆ - on the battery against - on the remote control
3Replace the cover by aligning it with the base of the remote
control and pressing it back into place.
➢
Do not mix battery types, i.e. alkaline and manganese.
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 8

English - 9
n
Infrared Remote Control
➢The performance of the remote control may be affected by bright light.
DIRECT CHANNEL SELECTION
MENU DISPLAY/
TELETEXT INDEX
CONTROL THE CURSOR
IN THE ON-SCREEN MENU
PICTURE FREEZE
TELEVISION STANDBY
AUTOMATIC SWITCH-OFF
PICTURE SIZE
TELETEXT PAGE HOLD
TELETEXT STORE
INFORMATION DISPLAY/
TELETEXT REVEAL
EXIT FROM ANY DISPLAY
EPG DISPLAY/
ONE OR TWO-DIGIT CHANNEL
SELECTION
SELF FOCUS
SURROUND ON/OFF DIRECTLY
SOUND MODE SELECTION
TELETEXT SUB-PAGE
TELETEXT CANCEL
EXTERNAL INPUT SELECTION/
TELETEXT MODE (LIST/FLOF)
SELECTION
DTV CHANNEL LIST DISPLAY
CONFIRM YOUR CHOICE
(ANALOG TV : STORE OR ENTER)
(DTV : OK, SELECT, OR ENTER)
NEXT CHANNEL/
TELETEXT NEXT PAGE
IF YOUR REMOTE CONTROL IS
NOT FUNCTIONING PROPERLY,
TAKE OUT THE BATTERIES AND
PRESS THE RESET BUTTON FOR
ABOUT 2~3 SECONDS. RE-INSERT
THE BATTERIES AND TRY USING
THE REMOTE CONTROL AGAIN.
DIGITAL SUBTITLE DISPLAY
SWITCH REPEATEDLY BETWEEN
THE LAST TWO CHANNELS
DISPLAYED
PREVIOUS CHANNEL/
TELETEXT PREVIOUS PAGE
MAKE THE REMOTE CONTROL WORKS
FOR TV, STB, VCR, CABLE, DVD
PLAYER
SWITCH BETWEEN TV AND DTV
MODE
VOLUME INCREASE
TEMPORARY SOUND SWITCH-OFF
VOLUME DECREASE
DTV MENU DISPLAY/
TELETEXT SIZE SELECTION
FASTEXT TOPIC SELECTION/
EPG DISPLAY/
FAVOURITE CHANNEL EDITION
TELETEXT DISPLAY/
MIX BOTH TELETEXT INFORMATION
AND THE NORMAL BROADCAST
VCR/DVD FUNCTIONS;
-REWIND ( )
-STOP ( )
-PLAY/PAUSE ( )
-FAST FORWARD ( )
REMOTE CONTROL SETUP
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 9

English - 10
To view television channels correctly, a signal must be received by
the set from one of the following sources:
◆An outdoor aerial
◆A cable television network
◆A satellite network
1In the first three cases, connect the aerial or network input cable to
the ANT IN on the rear of the television.
2If you are using an indoor aerial, you may need to adjust it when
tuning your television until you obtain a picture that is both sharp
and clear.
For further details, refer to:
◆(Digital TV) “Updating the Channel List Automatically” on
page 24
◆(Digital TV) “Updating the Channel List Manually” on page 25
◆(Analog TV) “Storing Channels Automatically” on page 42
◆(Analog TV) “Storing Channels Manually” on page 44
Connecting to an Aerial or Cable Television Network
Rear of the TV
Cable Television
Network
or
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 10

English - 11
o
5
Connecting a Satellite Receiver or Decoder
In order to watch television programmes broadcast via a
satellite network, you must connect a satellite receiver to
the rear of TV. Also, in order to descramble a coded
transmission signal, you must connect a decoder to the
rear of TV.
◆Using a SCART cable
Connect the receiver (or decoder) SCART cable to one
of the SCART connectors on the rear of the television.
◆Using a coaxial cable
Connect a coaxial cable to the:
- Receiver (or Decoder) output socket.
- Television aerial input socket.
➢If you wish to connect both a satellite receiver
(or decoder) and a VCR, you should connect the:
◆Receiver (or Decoder) to the VCR
◆VCR to the television
Otherwise, connect the receiver (or decoder) directly
to the television.
Rear of the TV
Satellite receiver/
Decoder
Coaxial
Cable
SCART
Cable
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 11

T
T
th
English - 12
The mains lead is attached to the rear of your television.
1Plug the mains lead into an appropriate socket.
➢
The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
2Press the “ I” button (On/Off) on the front or side of the television.
Result:The Standby indicator on the front of the television
lights up.
3Press the POWER ()button on the remote control to switch
the television on.
Result :The programme that you were watching last is re-
selected automatically.
➢
If you have not yet stored any channels, No clear picture
appears. Refer to “Storing Channels Automatically” on page
42 or “Storing Channels Manually” on page 44.
➢
You can also switch the television back on by pressing the
P /(or C/P. on the front panel) or numeric
button on the remote control.
4To switch your television off, press the “ I” button (On/Off) again.
Switching Your Television On and Off
Placing Your Television in Standby Mode
Your television can be placed in Standby mode, in order to reduce
the power consumption.
Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1Press the POWER ()button on the remote control.
Result:The screen is turned off and the Standby indicator on
the front of the television lights up in red.
2To switch the television back on, simply press the POWER ()
button again.
➢
You can also switch on by pressing the TV/DTV or P /
button.
➢
You can also switch the television back on by pressing the
P /(or C/P. on the front panel) or numeric
button on the remote control.
☛Do not leave your television in Standby mode for long
periods of time (when you are away on holiday, for
example). Turn your television off by pressing the “ I”
button (On/Off) on the front or side of the television. It is
best to unplug the set from the mains and aerial.
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 12

English - 13
Becoming Familiar with the Remote Control
The remote control is used mainly to:
◆Change channels and adjust the volume
◆Set up the television using the on-screen menu system
The following table presents the most frequently used buttons and
their functions.
Button Viewing Function Menu Function
Used to display the next -
stored channel.
Used to display the
-
previous stored channel.
to Used to display the corresponding channels.
➢For double digit channels, the second digit must be
pushed immediately after the first. Failure to do this will
result in a single digit channel being displayed.
-/-- Used to select a channel numbered ten or over.
Press this button, and the “
-- ” symbol is displayed.
Enter the two-digit channel number.
PRE-CH Press the PRE-CH button. The TV will switch to the last
channel viewed.
To quickly switch between two channels that are far apart,
tune to one channel, then use the numeric buttons to select
second channel. Then, use the PRE-CH button to quickly
alternate between them.
Used to increase the -
volume.
Used to decrease the
-
volume.
MUTE Used to switch the sound off temporarily.
() ➢To turn the sound back on, press this button again, or
press the or button.
MENU Used to display the Used to return to the previous
() on-screen menu system. menu or normal viewing.
- Used to:
◆Display a submenu
containing selections for
the current menu option.
◆Increase/decrease a
menu option value.
- Used to confirm your choice.
TV/DTV Used to switch between -
TV and DTV mode.
EXIT - Used to exit from the any
() display.
.
e
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 13

English - 14
Plug and Play Feature
TV Auto Store
Country : China
Search
Enter Return
Move Enter Skip
Belgium
Germany
Spain
France
Italy
Netherlands
Switzerland
Sweden
United Kingdom
Eastern Europe
Others
Plug & Play
Start Plug & Play
OK
Enter Skip
Plug & Play
Check antenna input.
OK
Enter Skip
Search
Start
TV Setup
Time
Plug & Play
Language : English
Self Focus
Blue Screen : Off
▼ More
Move Enter Skip
English
Deutsch
Español
Italiano
Svenska
TV Clock
√√
Move Adjust Exit
Hour Minute
-- --
When the television is initially powered on, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
1If the television is in Standby mode, press the POWER ()
button on the remote control.
Result:The message Start Plug & Play is displayed.
2To start the Plug & Play, press the ENTER ()button.
Result:The options available in the Setup group are displayed
with Language is selected.
3Select the appropriate language by pressing the ▲or ▼button.
Press the ENTER ()button.
Result:The message Check antenna input. is displayed.
4Make sure that the antenna is connected to the TV.
Press the ENTER ()button.
Result:The Auto Store menu is displayed with Country is
selected.
5Select your country by pressing the ▲or ▼button.
Press the ENTER ()button.
Result:The Search menu is displayed.
6To start the channel store, press the ENTER ()button.
Result:The search will end automatically. Channels are sorted
and stored in an order which reflects their position in
the frequency range (with lowest first and highest last).
When it has finished, the Clock menu is displayed.
➢To stop the search before it has finished or return to normal
viewing, press the MENU ()button.
7Press the œor √button to move to the Hour or Minute.
Set these by pressing the ▲or ▼button.
➢You can also set the Hour and Min by pressing the numeric
buttons directly.
If
➢
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 14

English - 15
d
d
.
l
c
8When you have finished, press the MENU ()button.
Result:The menu is turned to Auto Store in DTV mode
automatically.
If you want to reset this feature...
➢
Not available in DTV mode.
1Press the MENU ()button.
Result:The main menu is displayed.
2Press the ▲or ▼button to select Setup.
Result:The options available in the Setup group are displayed.
3Press the ENTER ()button.
4Press the ▲or ▼button to select Plug & Play.
Press the ENTER ()button.
Result:This feature starts with the message Start Plug &
Play is displayed.
5For further details on how to set, refer to the opposite page.
Plug and Play Feature (continued)
TV Setup
Time √√
Plug & Play √√
Language : English √√
Self Focus √√
Blue Screen : Off √√
▼ More
Move Enter Return
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 15

English - 16
Changing Channels
Using the P /buttons.
Press the P /button on the remote control ( C/P. on the
front of TV).
The TV changes channels in sequence. You can select all channels
(analog and digital channels) that the TV has memorized.
➢You can not select channels that were either erased or not
memorized.
Using the numeric (0~9) buttons.
Press the numeric buttons to quickly tune to any channel.
➢You can select all channels that were either erased or not
memorized.
To select analog channel 27, press the , 2, then 7.
To select digital channel 27, press the 0, 2, then 7.
The TV will change channels when you press the second number.
To change to single-digit channels (0~9) faster, press the 0before the
single digit. (For analog channel 4, press the 0, then 4. For digital
channel 4, press the 0, 0, then 4.)
➢MHEG (Multimedia and Hypermedia Information Coding
Experts Group)?
An International standard for data encoding systems used
in multimedia and hypermedia. This is at a higher level
than the MPEG system which includes data-linking
hypermedia such as still images, character service,
animation, graphic and video files as well as multimedia
data. MHEG is user runtime interaction technology and is
being applied to various fields including VOD (Video-
On-Demand), ITV (Interactive TV), EC (Electronic
Commerce), tele-education, tele-conferencing, digital
libraries and network games.
➢In the case of DTV mode,
OK or Select can be used as the
ENTER ()button.
➢It may take some time to display a channel if your chosen channel
has the MHEG feature.
W
se
in
Y
by
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 16

English - 17
g
d
s
e
Choosing Your Language
When you start using your television for the first time, you must
select the language which will be used for displaying menus and
indications.
1Press the MENU ()button.
Result:The main menu is displayed.
2Press the ▲or ▼button to select Setup.
Result:The options available in the Setup group are displayed.
3Press the ENTER ()button.
4Press the ▲or ▼button to select Language. Press the ENTER
()button.
Result:The languages available are listed.
5Select the appropriate language by pressing the ▲or ▼button.
Press the ENTER ()button.
TV Setup
Time √√
Plug & Play √√
Language : English √√
Self Focus √√
Blue Screen : Off √√
▼ More
Move Enter Return
TV Setup
Time
Plug & Play
Language : English
Self Focus
Blue Screen : Off
▼ More
Move Enter Return
English
Deutsch
Español
Italiano
Svenska
Displaying Information
You can view the channel information and setting status you select
by pressing the “INFO ( )” button on the remote control.
P 1
Mono
Picture : Dynamic
Sound : Custom
12 : 02
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 17

English - 18
The “Self Focus” feature automatically finds the optimum picture
quality when blurring, overlapping colours or incorrect focus
occurs. These conditions may be caused by moving your TV.
1Press the MENU ()button.
Result:The main menu is displayed.
2Press the ▲or ▼button to select Setup.
Result:The options available in the Setup group are displayed.
3Press the ENTER ()button.
4Press the ▲or ▼button to select Self Focus. Press the ENTER
()button.
Result:The Self Focus is selected.
5Press the ENTER ()button again
Result:The self focus process begins with the message Self
Focus and horizontal bar is displayed. During the
process, minor distortions of the picture may occur. At
this time, the colors may diffuse and a searching action
will appear on the edges of the screen. This is a normal
part of the adjustment. When it is finished, all of things
will disappear and the optimum picture quality can be
enjoyed.
➢It can be displayed simply by pressing the SELF FOCUS
button.
➢
◆Changing channels and any other signal changes will
pause the self focus until a stable signal has returned.
It resumes after the signal has been stabilised. This
feature will not work without a signal.
◆Ambient light that is too bright may affect the self focus.
If this occurs, darken the environment and try again.
Adjusting the Screen Automatically (Self Focus)
Self Focus
TV Setup
Time √√
Plug & Play √√
Language : English √√
Self Focus √√
Blue Screen : Off √√
▼ More
Move Enter Return
TV Self Focus
Self Focus √√
Auto :On
√√
Message Display : On √√
Move Enter Return
T
b
o
“S
m
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 18

English - 19
d.
R
l
.
TV
The “Self Focus” feature starts on default. It will automatically
begin 10 minutes after switching on the power and the appearance
of the screen image. To set the optimum picture quality, the
“Self Focus” will automatically begin again after another 30
minutes, as the screen image is then fully stabilised.
1Press the MENU ()button.
Result:The main menu is displayed.
2Press the ▲or ▼button to select Setup.
Result:The options available in the Setup group are displayed.
3Press the ENTER ()button
4Press the ▲or ▼button to select Self Focus. Press the ENTER
()button.
Result:The options available in the Self Focus group are
displayed.
5Press the ▲or ▼button to select Auto. Press the ENTER ()
button.
6To turn off the automatic execution of the self focus feature, select
Off by pressing the ▲or ▼button. Press the ENTER ()
button.
Deactivating the Automatic Execution of the Self Focus
TV Setup
Time √√
Plug & Play √√
Language : English √√
Self Focus √√
Blue Screen : Off √√
▼ More
Move Enter Return
Self Focus
Self Focus
Auto : On
Message Display : On
Move Enter Return
Off
On
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 19

English - 20
1Press the MENU ()button.
Result:The main menu is displayed.
2Press the ▲or ▼button to select Setup.
Result:The options available in the Setup group are displayed.
3Press the ENTER ()button.
4Press the ▲or ▼button to select Self Focus. Press the ENTER
()button.
Result:The options available in the Self Focus group are
displayed.
5Press the ▲or ▼button to select Message Display.
Press the ENTER ()button.
6To remove the message Self Focus and horizontal bar on the
screen during the self focus process, select Off by pressing the
▲or ▼button. Press the ENTER ()button.
Removing the “Self Focus” from the Display
TV Setup
Time √√
Plug & Play √√
Language : English √√
Self Focus √√
Blue Screen : Off √√
▼ More
Move Enter Return
TV Self Focus
Self Focus
Auto : On
Message Display : On
Move Enter Return
Off
On
T
th
➢
➞
➞
➞
➞
➞
BP68-00491A (J60C_UK) 2005/04/18 05:10 PM Page 20