Sanipex BAGNO DESIGN Bristol BDM-BIS-447X Series User manual

BDM-BIS-447X-XX
BRISTOL WALL MOUNTED 5 HOLE BATH SHOWER MIXER
www.sanipexgroup.com

IMPORTANT PLEASE READ
 B 
 

 






 L  C 



 x 
           
           
 



     








 









12
Referring to the dimensions
shown in picture, embed the
body (1) into the wall,
checking that it is well
aligned
Make the connections and
check that is watertight
and there are no leaks.
IMPORTANT: leave the
plastic protection mounted
until tiles are applied and
properly cut in order to
follow the protection
shape.
100 100 100 100
460
455
95
100
79
439
90
68
203
Ø24
60 60 60
Ø30
Ø60 Ø60 Ø60Ø60 Ø60
52
57-72
57-72
191
90
Ø24
68
G12"

4
3a
3
Remove the protections,
assemble (and cut if
necessary) 3 extensions
according to scheme 3a-3b
3b
Assemble the handles Insert the spout in the plate
(5a) and screw it to the
desired position (5b) using
teflon or hamp
5

6
Screw the connection into
his place and secure it
using teflon or hamp
8
7
Screw the thread connection
and the plate (6): check if it is
necessary to use the extension
supplied (7a), and if it is necessary
to cut it according with the
scheme (7b+7c)

9
10
Insert the shower hook and fix it with the grub screw

Note:

INM-BIS-447X-XX-05-22
www.sanipexgroup.com