Santec AVA YY-CU-TM User manual

PAGE 01
AVA COLLECTION
‘CU’ STYLE HANDLE TRIM FOR 4-POR
T
, 5-PORT AND STOP V ALVES
KEEP THIS INSTRUCTION BOOKLET FOR FUTURE REFERENCE
YY-CU-TM
YY-TF-TM
ITEM NUMBER

INSTALLATION INSTRUCTIONS
FLUSH BOTH SUPPLY LINES BEFORE INSTALLATION
.
AFTER FLUSHING , SHUT OFF BOTH SUPPLY LINES.
MINIMUM HOLE SIZE FOR THE HANDLE TRIMS IS 1 5/8” AND MAXIMUM OF 1 3/4”
INSTALLATION INSTRUCTION
INSTALLING THE VALVE WITH THE TRIM
1- Install the valve onto the wall with at least 2-1/2” space
between the center of the valve inlet and the finished wall.
2- Screw the extension all thread and stem onto
the valve making sure it is all the way in.
3- Mark the extension all thread flushed to the wall,
remove it and cut.
Do the same with the stem but this time cut 1/4"
less than the extension thread in order to attach
handle.
PAGE 02
STEM
2-1/2" - 3-1/2"
c enter of IN port
EXTENSION
ALL THREAD
CUT EXTENSION
ALL THREAD AND
STEM FLUSH TO WALL
FINISHED WALL
CUT STEM 1/4"
SHORTER FOR HANDLE
INSTALLATION
CUT FLUSH TO
WALL
1/4" SHORTER
THAN ALL THREAD
4- Cut off the excess All Thread and Stem
(remember to cut the Stem 1/4" shorter)
TEST FOR PROPER FUNCTION BEFORE CLOSING WALLS!

INSTALLATION INSTRUCTIONS
5 - Replace the handle onto the stem.
Tighten the handle set screw firmly.
6 - Apply the finish trim.
7
5
4
11
12
8
9
10
2
3
1
6
ITEM
NO.
PART
NUMBER
DESCRIPTION QTY.
1 PH0016
Novo Widespread
Handle Flange
1
2 PH9913
Novo II
Widespread/Roman
Tub Handle
1
3 PM-099 Teflon Washer 2
4 PM-150 Screw 1
5 PM-184 Belleville Washer 1
6 PM-407 Rubber Washer 1
7 SA234 Broach Extension 1
8 PM-007-1 20K Broach Extension 1
9 PM-020
Teflon Washer for
Extensions
2
10 PM-017 O-Ring 1
11 PM-1111 Valve Extension 1
12 PM-1112 Valve Extension 1
MODEL# YY-TF-TM
6
3
7
2
5
1
4
8
9
YY-CU-TM
ITEM
NO.
PART
NUMBER
DESCRIPTION QTY.
1 PH0086
Widespread
Handle Lever
1
2 SA240S Short Broach 1
3 PM-439 Screw 1
4 PM-007-1
20T Broach
Extension
1
5 PM-1111 Valve Extension 1
6 PM-1112 Valve Extension 1
7 PM-099 Teflon Washer 2
8 ph0016-RC
Novo Widespread
Handle Flange
1
9 PM-407 Rubber Washer 1

This warranty does not cover:
Drains
Crystals and/or glass
Damage due to negligence, accident, abuse, improper installation, or improper maintenance such as, but not limited to: heat
from soldering during installation, the use of plumber’s putty, damage from tools used during installation, the use or exposure
to chemicals or cleaning products either abrasive or non-abrasive, or the use of any cleaning tool or product other than a
soft, clean cloth. Reverse osmosis may also shorten the life of the nish.
1.
2.
3.
4
Changes in the nish or in the product due to normal wear or aging does not cover any products or parts
5.
6.
7.
SANTEC is committed to enhancing your bathroom experience by creating luxury products that will provide
enduring satisfaction. Every effort has been made to satisfy the highest standards of design and production to create
lasting peace of mind for our customers. Proof of purchase must be provided for all warranty claims, SANTEC provides the
following limited warranties on ourproduct.
This warranty only extends to the original consumer purchaser.
LIFET I ME L IMITE D WARRANTY
LENGTH O F WA RRANTY & WHO IS C OVERED BY O U R WARRANTY
WHAT IS C OVERED BY OUR WA RRANTY
EXCLUSIONS ANDL IMITATIONS OF WARRANTY
1.
2.
3.
Finishes: SANTEC Polished Chrome, Polished Nickel and Satin Nickel nishes carry a Lifetime
Limited warranty against manufacturing defects and tarnish to the original purchaser. Custom nishes carry
a ten (10) years limited warranty against manufacturing defects and tarnish to the original purchaser only.
Kitchen products carry a three (3) yearlimited warranty.
Cartridges:Santec cartridges carry a lifetime limited warranty, with the exception of thermostatic and
pressure balanced cartridges, which carry a three (3) year limited warranty against manufacturing defects to
the original purchaser.
Parts:Santec parts carry a ten (10) year limited warranty against manufacturing defects, to the
original purchaser. Kitchen products carry a ve (5) year limited warranty.
Effective: 05/01/2015
which have been altered or used in a manner not typical for the product.
Loss, damages, or expense, incidental or consequential whatsoever, originating from the purchase, installation, use, repair,
failure, or replacement of any
SANTEC pro ductorpart, allowed by law.
Commercial and/or Industrial installationsand use of the product.
This warranty does not include labor, travel charges, or any costs incurred for repair, removal, installation, servicing,
diagnosing, or handling of either defective or replacement parts.
Access should be provided to the roman tub valves for future service or repair to valves and piping. Under no circumstances will Santec
Faucet, Inc. be liable for any costs associated with the removal of materials for future
access to the tub valves or piping for service or repair.
This warranty does not cover: damage due to negligence, accident, abuse, improper installation, or improper
maintenence such as, (but not limited to): heat from soldering during installation, the use of plumbers putty, damage
from tools used during installation, the use or exposure to chemical or cleaning products, abrasive or non-abrasive, or
the use of any cleaning tool or product other than a soft, clean cloth.
This warranty does not cover: changes in the
finish or in the product due to normal wear or again and does not cover any product or parts which have been
altered or used in a manner not typical for the product.
Santec will not be held liable for damage to products caused by
the freight carrier, any such claims should be made immediately with the freight carrier. This warranty does not cover any
cost involved in the installation, repair, or replacement of any SANTEC product or parts. This warranty does not cover
and SANTEC will not be held liable for any loss, damages, or expenses, incidental or consequential whatsoever,
originating from the purchase, installation, use, repair, failure, or replacement of any SANTEC product or part, as
allowed by law. The product of components of the covered product will either be repaired, renished or replaced at the
sole discretion of SANTEC. SANTEC reserves the right to examine any product claimed defective prior to any warranty
claim being accepted or processed, at its sole discretion. This warranty gives you specic legal rights and you may
have other rights which may vary from state to state.
9.
8.
3501 Challenger Street
Torrance, CA 90503
www.santecfaucet.com
Phone. [phone]
Fax. [phone]