Santec E-Series User manual

E-SERIES SERIES
SQUARE COLLECTIONS
24” TOWEL BAR
MODEL: 2461SQ10
2461SQ75
KEEP THIS INSTRUCTION BOOKLET FOR FUTURE REFERENCE
Important : Please register your product online at www.santecfaucet.com within
30 days of purchase. Santec reserves the right to request additional documents
before servicing warranty requests.
01 02
Installation Instructions
Place the trim parts against the assigned wall location. Make sure the bar is leveled and the bar post
positions are correct. Mark with pencil the bar post ange positions and remove the trims.
1.
Using the Allen key provided, remove the mounting posts from the bar posts. Press the mounting
posts against the bar post ange positions on the wall and mark the screw hole positions.
NOTE: MAKE SURE THE ALLEN SCREW HOLE ON THE MOUNTING POST IS FACING DOWN
WHEN SECURING TO WALL.
2.
WALL
bar post
INSTALLING ON WOODEN SURFACE
For wooden surface, the mounting post can be
secured by screwing the screws directly into the wall.
INSTALLING ONTO DRYWALL SURFACE
Using a drill, pre-drill holes for the anchors. Insert the
anchors into the wall. The mounting post can be
secured by screwing the screws into the anchors.
INSTALLING ONTO A SOLID SURFACE
Measure the dimensions carefully. Using a drill,
pre-drill the holes. Secure the mounting post by
screwing the screws into the wall.
holder post mark
mounting post
24"
11
2
"
7
8
"
23
8
"

03 04
Installation Instructions
Press the left bar post against the mounting post. Align the bar post and secure it by tightening the set
screw.
3.
Insert the towel bar into the secured bar post. Press the right bar post onto the right mounting post.
Insert the right side of the towel bar into the right bar post. Align the right bar post and tighten the set
screw rmly.
4.
Check both bar posts to make sure they are rmly secured. If not, tighten the set screws with the Allen
key.
5.
PLEASE REGISTER YOUR PRODUCT ONLINE FOR WARRANTY SERVICES
www.santecfaucet.com/registration
1.
2.
3.
4.
SANTEC LIFETIME LIMITED WARRANTY
Finishes: SANTEC Polished Chrome, Polished Nickel and Satin Nickel finishes carry a Lifetime
Limited warranty against manufacturing defects and tarnish to the original purchaser. Custom finishes
carry a ten (10) years limited warranty against manufacturing defects and tarnish to the original
purchaser only. Kitchen products carry a three (3) year limited warranty.
Cartridges: Santec cartridges carry a lifetime limited warranty, with the exception of thermostatic and
pressure balanced cartridges, which carry a three (3) year limited warranty against manufacturing
defects to the original purchaser.
Parts: Santec parts carry a ten (10) year limited warranty against manufacturing defects, to the
original purchaser. Kitchen products carry a five (5) year limited warranty.
Warranty exclusions and limitations:
Drains
Crystals and/or glass Changes in the finish or in the product due to normal wear or aging does not
cover any products or parts which have been altered or used in a manner not typical for the product.
Loss, damages, or expense, incidental or consequential whatsoever, originating from the purchase,
installation, use, repair, failure, or replacement of any SANTEC product or part, allowed by law.
Commercial and/or Industrial installations and use of the product.
This warranty does not include labor, travel charges, or any costs incurred for repair, removal,
installation, servicing, diagnosing, or handling of either defective or replacement parts.
Effective: 05/01/2015
Replaces and supersedes any previously issued warranty
FINISH CARE INFORMATION
For clear coated or enamel color nishes:
We recommend that all faucets, drains, etc
be gently wiped dry with a soft cloth after use
to avoid water spotting and water deposit
buildup. A mild liquid hand soap, such as
Ivory may be used occasionally if desired.
Use of non-abrasive carnauba wax will add
protection to the nish and should be used if
the faucets will not be dried after use.
For non-clear coated and specialty nishes:
We recommend that all faucets, drains, etc be
gently wiped dry with a soft cloth after use to
avoid water spotting and water deposit
buildup. Use of a non-abrasive carnauba wax
is required occasionally.