sanus accents AMF112 User manual

Milestone AV Technologies
6436 City West Parkway
Eden Prairie, MN 55344 USA
Customer Service
Americas: 800-359-5520 • 651-484-7988 • [email protected]om
Europe, Middle East, and Africa: [phone] • europe[email protected]om
Asia Pacific: 86 755 8996 9226 • [e-mail]
accents.sanus.com
©2012 Milestone AV Technologies, a Duchossois Group Company.
All rights reserved. Accents is a Milestone brand.
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.
(6904-002010<01>)
Scan here to view
product demo and install
videos or visit san.us/103
AMF112 Instruction Manual

6904-002010 <01>
2
16.54
420.0
8.25
209.6
15.77
400.6
100mm to 420mm
18.70
475.0
5.00
127.0
in.
[mm]
12.02
305.4
3.02
76.8
15° 15°
Technical Specications
Specications
ÙWeight capacity-DO NOT EXCEED: 27 kg (60lb) includes TV and any accessories
ÙTilt: ± 15°
CAUTION: Avoid potential personal injuries and property damage!
ÙDo not use thisproduct for any purpose not explicitly specied by manufacturer.
ÙThewall must becapableof supporting vetimes theweight of themonitor and mount combined.
ÙThisproduct isnot designed for use in metal stud walls!
ÙIf you do not understand these instructions, or havedoubtsabout thesafety of theinstallation, assembly or use of this
product, contact manufacturer Customer Serviceor call a qualied contractor.
ÙManufacturer isnot responsiblefor damageor injury caused by incorrect assembly or use.
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE
Required Tools
10mm
(3/8 in.)
5.5mm
(7/32 in.)
13mm
(1/2 in.)

6904-002010 <01> 3
5/32 in. 3/16 in.
[01] x 1
[02] x 1 [03] x 1
[04] x 1
[05] x 1
[20] x 1 [21] x 1
[23] x 1 [24] x 1
[22] x 4
[06] x 3 [07] x 3 [08] x 3
[09] x 4 [10] x 4
[11] x 4 [12] x 4 [13] x 4
[14] x 4 [15] x 4
[16] x 4 [17] x 4
[19] x 4[18] x 8
M4 M6/M8
M4 M6/M8
M8 x 16mm M8 x 35mm
M6 x 12mm M6 x 20mm M6 x 35mm
M4 x 12mm M4 x 30mm
5/16 x 2¾ in.
8-32 x 3/8 in. 8-32 x 9/16 in.
WARNING: This product contains small items that could be a choking hazard if swallowed.
Beforestarting assembly, verify all partsareincluded and undamaged.If any partsaremissing or damaged, do not return the
damaged item to your dealer; contact Customer Service. Never use damaged parts!
NOTE: M4, M6, or M8 describes thediameter, mm describes thelength of screwsthat arelabeled M# X ##mm.Not all
hardwareincluded will beused.
Supplied Parts and Hardware

6904-002010 <01>
4
Beforeyou begin, hand thread screwsinto thethreaded insertson theback of your TV to determinethecorrect screw
diameter (M4, M6, or M8).Verify that thereareadequatethreadsto securethebracketsto themonitor.If you encounter
resistance, stopimmediately and contact customer service.
CAUTION: Avoid potential personal injuries and property damage! Use theshortest screw and spacer combination to
accommodateyour needs. Using hardwarethat istoo long may damageyour monitor’sinternal components.
1Install TV Brackets

6904-002010 <01> 5
Ensurethat thebracket islevel on theback of theTV.If you need extra spaceto accommodatecables, recesses, or protrusions,
see theinstallation option that uses spacers.
M4 M6
M8
[02]
[03]
[03][02]
[02]
[18] [19]
[19]
[09]
[14]
[11]/[12]
[02]
[02]
1-1 For TVs with a at/unobstructed back

6904-002010 <01>
6
M4 M6
M8
Ensurethat thebracketsarelevel on theback of theTV.Standard congurationsareshown.For special applications, or if you
areuncertain about your hardwareselection, contact Customer Service.
[02]
[03]
[03][02]
[02] [02]
[02]
[18] [19]
[19]
[10]
[13]
[15]
[18]
[16]
[17]
[17]
1-1 For TVs with an irregular/obstructed back

6904-002010 <01> 7
1
2
1.Slidethehorizontal brackets[04] and [05] onto thevertical brackets[02] and [03].Makesurethat they areevenly spaced
left to right.
2. Install screws[22] to lock horizontal brackets[04] and [05] in position.
[02]
[02]
[02]
[03]
[03]
[04]
[04]
[04]
[05]
[05]
[22]
[22]
1-2 Attach horizontal brackets

6904-002010 <01>
8
2
4
3
1< 16 mm
(5/8 in.)
[01]
[01]
75 mm
(3 in.)
[07]
[08]
1.Locatestud.Verify thecenter of thestud with an awl or
thin nail or use an edgeto edgestud nder.
CAUTION: To avoid potential injuries or property
damage:
ÙAny material covering thewall must not exceed 16
mm (5/8 in.).
ÙMinimum wood stud size: common 2x 4 in.
(nominal 1.5 x 3.5 in.)
2. Level thewall plate[01] and mark theholelocations.
3.Drill pilot holes asillustrated.
CAUTION: To avoid potential injuries or property
damage: Pilot holes MUST bedrilled to a depth of 75
mm (3 in.), using a 5.5 mm (7/32in.) diameter drill bit.
2Mount the Wall Plate
Wood Stud 5.5 mm
(7/32 in.)
13 mm
(1/2 in.)
4.Tighten thelag bolts[08] only until thewashers[07] are
pulled rmly against thewall plate[01].
CAUTION: Improper use could reducetheholding
power of thelag bolt.To avoid potential injuries or
property damage: DO NOT over-tighten thelag bolts
[08].

6904-002010 <01> 9
2Mount the Wall Plate
Solid Concrete and Concrete Block 10mm
(3/8 in.)
13mm
(1/2 in.)
1.Level wall plateand mark theholelocations.
CAUTION: To avoid potential injuries or property
damage:
ÙMount wall platedirectly onto theconcretesurface.
ÙMinimum solid concretethickness: 8 in.
ÙMinimum concreteblock size: 8 x 8 x 16 in.
2. Drill pilot holes asillustrated.
CAUTION: To avoid potential injuries or property
damage:
ÙPilot holes MUST bedrilled to a depth of 75 mm (3
in.), using a 10mm (3/8 in.) diameter drill bit.
ÙNever drill into themortar between blocks.
12
34
[01]
[01] [06]
[06]
[07]
[08]
75 mm
3 in.
3.Insert lag bolt anchors[06].Besuretheanchors[06]
areseated ush with theconcretesurface.
4.Tighten thelag bolts[08] only until thewashers[07] are
pulled rmly against thewall plate[01].
CAUTION: Improper use could reducetheholding
power of thelag bolt.To avoid potential injuries or
property damage: DO NOT over-tighten thelag bolts
[08].

6904-002010 <01>
10
[21]
[20]
[05]
[04]
[01]
[01]
3 Hang the TV/Bracket Assembly onto
the Swing Arm
HEAVY! You will need assistancewith thisstep.
Level theTV/bracket assembly and install thewasher[20] and retaining screw [21].
CAUTION: Avoid potential injuries or property damage! Besureto install thewasher[20] and retaining screw [21]
securely.Thiswill prevent theTV from separating away from themount.

6904-002010 <01> 11
[01]
[01]
[01]
1
2
3
NOTE: Besureto leaveenough slack in thecables to allow themonitor to movefreely.
4 Manage Cables

6904-002010 <01>
12
A
B
[23]
[24]
MilestoneAV Technologies and itsaliated corporationsand subsidiaries (collectively, “Milestone”), intend to makethismanual accurateand complete.
However, Milestonemakes no claim that theinformation contained herein coversall details, conditions, or variations. Nor does it providefor every possible
contingency in connection with theinstallation or use of thisproduct.Theinformation contained in thisdocument issubject to changewithout noticeor
obligation of any kind.Milestonemakes no representation of warranty, expressed or implied, regarding theinformation contained herein.Milestoneassumes
no responsibility for accuracy, completeness or suciency of theinformation contained in thisdocument.
A.Adjust arm extension and swivel tension.
B.Adjust up/down tilt tension.
NOTE: For clarity TV isnot shown.
5Adjust Tension