sanus accents AMF112 User manual

Sanus Systems
2221 Hwy 36 West
Saint Paul, MN 55113 USA
Customer Service
Americas: 800-359-5520 • 651-484-7988 • [email protected]om
Europe, Middle East, and Africa: + 31 40 2324700 • eur[email protected]om
Asia Pacific: 86 755 8996 9226 • [e-mail]
accents.sanus.com
©2010 Milestone AV Technologies, a Duchossois Group Company.
All rights reserved. Accents is a Milestone brand.
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.
AMF112
(6904-002010 <00>)
10mm
(3/8 in.)
5.5mm
(7/32 in.)
13mm
(1/2 in.)
Wood
Concrete

6904-002010 <00>
2
Wood stud walls Concrete/Concrete Block
Walls
WARNING This product contains small
items that could be a choking hazard
Tools Required CAUTION/WARNING
OPT
Heavy! Assistance Required. Choose an Option Troubleshooting and
Maintenance
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL BEFORE USING THIS PRODUCT
Specications:
Weight capacity-DO NOT EXCEED: 27 kg (60 lb) includes TV and any accessories
Tilt: ± 15°
CAUTION: Avoid potential personal injuries and property damage!
Do not use this product for any purpose not explicitly specied by manufacturer.
The wall must be capable of supporting ve times the weight of the monitor and mount combined.
This product is not designed for use in metal stud walls!
If you do not understand these instructions, or have doubts about the safety of the installation, assembly or use of this product, contact manufacturer
Customer Service or call a qualied contractor.
Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
CAUTION:
16.54
420.0
8.25
209.6
15.77
400.6
100mm to 420mm
18.70
475.0
5.00
127.0
in.
[mm]
12.02
305.4
3.02
76.8
15° 15°

6904-002010 <00> 3
5/32 in. 3/16 in.
Supplied Parts and Hardware.
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer;
contact Customer Service. Never use damaged parts!
NOTE: Not all hardware included will be used.
[01] x 1
[02] x 1 [03] x 1
[04] x 1
[05] x 1
[20] x 1 [21] x 1
[23] x 1 [24] x 1
[22] x 4
[06] x 3 [07] x 3 [08] x 3
[09] x 4 [10] x 4
[11] x 4 [12] x 4 [13] x 4
[14] x 4 [15] x 4
[16] x 4 [17] x 4
[19] x 4[18] x 8
M4 M6/M8
M4 M6/M8
M8 x 16mm M8 x 35mm
M6 x 12mm M6 x 20mm M6 x 35mm
M4 x 12mm M4 x 30mm
5/16 x 2.75 in.
10mm 15mm

6904-002010 <00>
4
1
CAUTION:
Install TV Brackets
Before you begin, hand thread screws into the threaded inserts on the back of your TV to determine the correct screw diameter (M4, M6, or M8). Verify that
there are adequate threads to secure the brackets to the monitor. If you encounter resistance, stop immediately and contact customer service.
CAUTION: Avoid potential personal injuries and property damage! Use the shortest screw and spacer combination to accommodate your needs. Using
hardware that is too long may damage your monitor’s internal components.

6904-002010 <00> 5
For TVs with a at/unobstructed back. Ensure that the bracket is level on the back of the TV. If you need extra space to accommodate cables, recesses, or
protrusions, see an installation option (1-2) that uses spacers.
1-1
M4 M6
M8
[02]
[03]
[03][02]
[02]
[18] [19]
[19]
[09]
[14]
[11]/[12]
[02]
[02]
OPT

6904-002010 <00>
6
M4 M6
M8
1-2
For TVs with an irregular/obstructed back. Ensure that the brackets are level on the back of the TV. Standard congurations are shown. For special applications,
or if you are uncertain about your hardware selection, contact Customer Service.
[02]
[03]
[03][02]
[02] [02]
[02]
[18] [19]
[19]
[10]
[13]
[15]
[18]
[16]
[17]
[17]
OPT

6904-002010 <00> 7
1
2
1-3
1. Slide the horizontal brackets [04] and [05] onto the vertical brackets [02] and [03]. Make sure that they are evenly spaced left to right.
2. Install screws [22] to lock horizontal brackets [04] and [05] in position.
[02]
[02]
[02]
[03]
[03]
[04]
[04]
[04]
[05]
[05]
[22]
[22]

6904-002010 <00>
8
CAUTION:
2
Wall Mounting
2-1: Wood Stud Mounting
CAUTION: Improper use could reduce the holding power of the lag bolt. To avoid potential injuries or property damage:
Pilot holes MUST be drilled to a depth of 75 mm (3 in.), using a 5.5 mm (7/32 in.) diameter drill bit.
DO NOT over-tighten the lag bolts [08].
Any material covering the wall must not exceed 16 mm (5/8 in.).
2-2: Solid Concrete and Concrete Block Mounting
CAUTION: Improper use could reduce the holding power of the lag bolt. To avoid potential injuries or property damage:
Pilot holes MUST be drilled to a depth of 75 mm (3 in.), using a 10 mm (3/8 in.) diameter drill bit.
Be sure the anchors [06] seat ush with the concrete surface.
Mount wall plate directly onto the concrete surface.
Never drill into the mortar between blocks.
DO NOT over-tighten the lag bolts [08].

6904-002010 <00> 9
5.5mm
(7/32 in.)
13mm
(1/2 in.)
2
4
3
1< 16 mm
(5/8 in.)
[01]
[01]
Wood Stud Wall Mounting – See Cautions in Step 2.
1. Locate studs. Verify the center of the stud with an awl or thin nail or
use an edge to edge stud nder.
2. Level the wall plate [01] and mark the hole locations.
3. Drill pilot holes as illustrated.
4. Tighten the lag bolts [08] only until the washers [07] are pulled rmly
against the wall plate [01].
2-1
75 mm
(3 in.)
[07]
[08]
OPT

6904-002010 <00>
10
10mm
(3/8 in.)
13mm
(1/2 in.)
12
3 4
[01]
[01] [06]
[06]
Solid Concrete and Concrete Block Mounting – See Cautions in Step 2.
1. Level wall plate and mark the hole locations.
2. Drill pilot holes as illustrated.
3. Insert lag bolt anchors [06].
4. Tighten the lag bolts [08] only until the washers [07] are pulled rmly
against the wall plate [01].
2-2
[07]
[08]
75 mm
3 in.
OPT

6904-002010 <00> 11
3
CAUTION:
HANG THE TV/BRACKET ASSEMBLY ONTO THE SWING ARM
HEAVY! You will need assistance with this step.
Level the TV/bracket assembly and install the washer [20] and retaining screw [21].
CAUTION: Avoid potential injuries or property damage! Be sure to install the washer [20] and retaining screw [21] securely. This will prevent the TV from
separating away from the mount.
[21]
[20]
[05]
[04]
[01]
[01]

6904-002010 <00>
12
4
[01]
[01]
[01]
CABLE MANAGEMENT
NOTE: Be sure to leave enough slack in the cables to allow the monitor to move freely.
1
2
3

6904-002010 <00> 13
5
TENSION ADJUSTMENT
A. Adjust arm extension and swivel tension.
B. Adjust up/down tilt tension.
NOTE: For clarity TV is not shown.
MAINTENANCE:
A
B
[23]
[24]

6904-002010 <00>
14
Milestone AV Technologies and its aliated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information
contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this
document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or implied, regarding the information contained herein. Milestone assumes no
responsibility for accuracy, completeness or suciency of the information contained in this document.