SAFETY TIPS
CAUTIONS FOR SAFETY
●The apparatus shall not be exposed to
dripping or splashing.
.Do not take the unit apart.
The laser beam used in the unit could
harm your eyes.
.Do not insert pins, etc., inside the unit.
This unit is equipped with asafety de-
vice which automatically turns the laser
beam off when the disc compartment is
opened, If apin or other metal object
should get inside the unit, however, this
safety device may be deactivated.
.Do not drop the unit or subject it to
strong shocks. Doing so could result in
damage.
Do not place the unit in the following
locations:
.Locations where the temperature is
high.
The unit’s cabinet may warp or the unit
may otherwise be damaged if it is
placed in direct sunlight, near heaters
(where the temperature is60°C/140”F
or greater) or in cars with the windows
closed, (In the summer, the tempera-
ture may get as high as 100°C/2120F or
more.)
Use the unit within atemperature range
of !5”C141“F to 35°C/950F,
.In humid or dusty locations,
●In locations exposed to heavy vibra-
tions.
●On unstable or tilted surfaces.
CONDENSATION
If cold water is poured into aglass, water
droplets form on the outside of the glass.
This is called condensation. Condensation
may occur on internal operating parts of the
lens.
Condensation occurs:
.When the unit is brought from the cold
outdoors into awarm room, or if it is in
acold room which is heated quickly.
.In the summer, if the unit is moved
suddenly from an air-conditioned room
or car to ahot or humid location.
Should condensation occur
The unit may not operate properly if con-
densation occurs.
Wait for 1or 2hours (to allow the internal
parts to adjust to the surrounding tempera-
ture) before using the unit,
-E6-
