SAFETY TIPS
CAUTIONS FOR SAFETY
sThe apparatus shall not be exposed
to dripping or splashing.
●Do not take the unit apart.
The laser beam used in the unit
could harm your eyes.
●Do not insert pins, etc., inside the
unit.
This unit is equipped with asafety
devicewhich automatically turnsthe
laser beam off when the disc com-
partment is opened. If apin or other
metal object should get inside the
unit, however, this safety device may
be deactivated.
.Do not drop the unit or subject it to
strong shocks. Doing so could re-
sult in damage.
Do not place the unit in the following
locations:
.Locations where the temperature is
high.
The unit’s cabinet may warp or the
unit may otherwise be damaged if it
isplacedin direct sunlight, near heat-
ers (where the temperature is 60”C
or CJWatM) or in cars with the win-
dows closed. (In the summer, the
temperature may get as high as
IOO”C or more.)
Use the unit within atemperature
range of 5°C to 35”C.
.In humid or dusty locations.
.in locations exposed to heavy vi bra- -
tions.
.On unstable or tilted surfaces.
CONDENSATION
If cold water is poured into aglass,
water droplets form on the outside of
the glass. This is called condensaticzm.
Condensation may occur on internal
operating parts of the lens.
Condensation occurs:
●When the unit is brought from tie
cold outdoors into awarm room, or .
if it is in acold room which is heated
quickly.
.In the summer, if the unit is moved
suddenly from an air-conditioned
room or car to ahot or humid loca-
tion.
Should condensation occur:
The unit may not operate properly if
condensation occurs.
Wait for 1or 2hours (to allow the intler-
nal parts to adjust to the surrounding
temperature) before using the unit.
-E5-
