2
Operating Instructions – Glass polishing machine Model GPM-5
2. General Information
• Read through these operating instructions carefully. They contain important information
for the safe and proper operation of the appliance.
• We recommend keeping the operating instructions in a place where you can always
quickly find them.
• If you pass on the appliance to a third party, please pass on these operating instructions
as well.
• As soon as you ha e unpacked the appliance, check that e erything is in good order and
condition. If anything is damaged, please contact your dealer.
• Please keep the cardboard packaging, you might need it if you mo e, or if the de ice has
to be returned for repairs.
• The appliance was de eloped for polishing glasses. The appliance is not intended for any
other purpose. Improper use may cause damage and will result in loss of warranty.
• In the e ent of a fault and/or malfunction, switch the appliance off. Disconnect the plug
from the socket and contact your dealer. He will carry out the repair using original
manufacturer's parts.
• Obser e the current accident pre ention regulations for the intended field of application
and general safety regulations.
• The manufacturer/dealer cannot accept liability for damage caused by a failure to comply
with these operating instructions. In addition, the safety of the appliance is no longer
warranted.
3. Safety Information
• The appliance must only be used when it is in proper working order and condition.
• Keep the packaging materials out of reach of children (e.g. plastic bags, polystyrene
parts). Danger of suffocation!
• Place the appliance on a stable, flat, heat-resistant surface away from gas or electric
sto es or other heat sources.
• Do not use the appliance outside or in damp/wet en ironments.
• Ne er touch the appliance, power cable or plug with moist or wet hands.
• The appliance must be connected to a properly installed wall socket. Do not connect any
other de ice to the same socket. The socket must always remain accessible so that the
de ice can be disconnected from the power supply in an emergency.
• When pulling out the plug, always grip the plug casing – ne er pull on the cable. Always
switch off the machine first.
• Ne er allow the cable to hang o er the edge of a table or any other sharp edges.
• Do not use any extension leads or adapter plugs.
• The cable must not come in contact with hot parts or water.
• Check the condition of the cable regularly. If it is damaged, e.g. by crushing, then it must
be replaced by a qualified professional.
• Do not lea e the appliance unattended when in use. Take extra care if children are
nearby, as they are not aware of the dangers of operating electrical equipment.
• Do not mo e the appliance when it is in use.
