Savant IP Audio Micro Aperature-4 User manual

EDG-4-AVB-x-00 Quick Reference Guide | 009-1789-03 1 of 2 45 Perseverance Way, Hyannis, MA 02601
Copyright © 2022 Savant Systems, Inc | 220817 Savant.com | 508.683.2500
Environmental
Temperature 32° to 140° F (0° to 60° C)
Humidity 10% to 90% Relative Humidity (non-condensing)
Dimensions and Weights
Height Width Depth Weight
Device 4.65 in
(11.80 cm)
4.65 in
(11.80 cm)
5.73 in
(14.57 cm)
1.75 lbs
(0.79 kg)
Shipping 7 in
(17.78 cm)
11 in
(27.94 cm)
13 in
(33.02 cm)
5.35 lbs
(2.42 kg)
Power
PoE Type
802.3af Type 1
802.at Type 2
802.3bt Type 3
802.3bt Type 4
Maximum
Power Draw
12.95 W (Type 1)
25.5 W (Type 2)
51 W (Type 3)
71 W (Type 4)
Networking
Supported
Standard
IEEE 802.1 AVB/TSN switches
IEEE 802.3af, 802.3at, 802.3bt (PoE)
Operating Parameters
Frequency
Response
Acoustic: 80 Hz - 20 kHz +/- 3 dB
Amplifier: 20 Hz - 20 kHz +/- 1 dB
Sensitivity 89 dB SPL (2.83V/1 meter)
Regulatory
Safety and
Emissions
FCC Part 15B CE Mark C-Tick UKCA
RoHS Compliant
Minimum Supported Release
Software Release da Vinci 8.10
SpecificationsProducts
IP Audio Micro Aperture 4: Speaker set (round)
IP Audio Micro Aperture 4: Speaker set (square)
IP Audio Micro Aperture 4: Add-on Pair (round)
IP Audio Micro Aperture 4: Add-on Pair (square)
Box Contents (EDG-4-AVB-x)
(1) IP Audio PoE Speaker with internal amplifiers
(1) IP Audio Satellite Speaker
(2) 4” Ceiling Mount (093-3105-00)
(1) Cutout Template (009-1769-00 or 009-1700-00)
(1) Product Regulatory Insert (009-1745-00)
Box Contents (EDG-4-SAT-x)
(2) IP Audio Satellite Speaker
(2) 4” Ceiling Mount (093-3105-00)
(1) Cutout Template (009-1769-00 or 009-1770-00)
(1) Product Regulatory Insert (009-1745-00)
Top Panel
PoE Speaker Satellite Speaker
PoE
+R1- +L2- +R2-
B
A
+ -
C
A
Speaker Output (3) Speaker Outputs
BPoE
8-pin RJ-45 port
10/100/1000 Base-T auto-negotiating port
Supports Audio Video Bridging (AVB)
CAudio Input Audio input from a PoE speaker
IP Audio Micro Aperature-4: Speaker Set/Add-on Pair [EDG-4-AVB-x-00]
Quick Reference Guide
IMPORTANT INFO! This device is not supported as a clock
master in a Savant AVB network.
Network Configuration
For networking guidelines and recommendations, refer to the Savant
Device Networking Guidelines available on the Savant Community
Knowledge Base.

EDG-4-AVB-x-00 Quick Reference Guide | 009-1789-03 2 of 2 45 Perseverance Way, Hyannis, MA 02601
Copyright © 2022 Savant Systems, Inc | 220817 Savant.com | 508.683.2500
Installation
1. Use the cutout template to cut a hole in the ceiling.
2. Insert the Ceiling Mount in the hole.
Additionally either the Pre-construction Bracket or the Flush Mount Kit
can be used.
–MRS-4-PCB
–MRS-4-FMK
If the ceiling is 5/8” thick or greater
remove the rubber friction bands from
the springs.
3. Push springs into place.
4. Connect the speaker connection.
5. Insert the speaker into the ceiling mount.