Sbarco T4 series User manual

T4 series user’s manual
Version: 2.2
All manuals and user guides at all-guides.com
all-guides.com

Ver:2.2
T4 series user’s manual I
Table of contents
1. Introduction............................................................................................................1
1.1 In the box......................................................................................................1
1.2 T4 Printer Features ....................................................................................2
1.2.1 Front view...........................................................................................2
1.2.2 Rear view............................................................................................2
1.2.3 Interior view........................................................................................3
1.3 T4e Printer Features..................................................................................4
1.3.1 Front view...........................................................................................4
1.3.2 Rear view............................................................................................4
1.3.3 Interior view........................................................................................5
2. Getting start ...........................................................................................................6
2.1 Loading the ribbon.....................................................................................6
2.2 Loading the media ...................................................................................10
2.3 T4 Connecting interfaces.......................................................................14
2.3.1 Centronics port (Parallel port).......................................................14
2.3.2 RS-232 port (Serial port)................................................................14
2.3.3 USB Slave........................................................................................15
2.3.4 Ethernet (Option).............................................................................15
2.4 T4e Connecting interfaces.....................................................................16
2.4.1 USB Slave........................................................................................16
2.4.2 Ethernet (Option).............................................................................16
2.5 Power on the printer................................................................................17
2.6 T4 Control panel .......................................................................................17
2.6 T4 Control panel .......................................................................................18
2.7 T4e Control panel.....................................................................................20
The key functions are available in Function mode: .............................................21
3. Printer options.....................................................................................................22
3.1 Peeler installation.....................................................................................22
3.2 Cutter installation.....................................................................................29
4. LCD screen icons...............................................................................................35
4.1 LCD screen information .........................................................................35
4.2 Graphic symbol on LCD screen...........................................................36
5. Configuration.......................................................................................................37
5.1 Menu structure..........................................................................................37
5.2 Parameters setup.....................................................................................40
All manuals and user guides at all-guides.com

Ver:2.2
T4 series user’s manual II
5.2.1 User Setup........................................................................................40
5.2.2 Communication setup.....................................................................40
5.2.3 Print Setup........................................................................................42
5.2.4 Test....................................................................................................44
5.2.5 Memory.............................................................................................44
5.2.6 Form..................................................................................................44
5.2.7 Warning message ...........................................................................45
5.2.8 Printer status....................................................................................46
6. Troubleshooting..................................................................................................47
6.1 LCD error message..................................................................................47
7. Specifications......................................................................................................48
7.1 T4 series general specifications..........................................................48
7.2 Universal Serial Bus (USB) port pin assignment.............................50
7.3 Serial port pin assignment.....................................................................51
7.4 Ethernet module port pin assignment................................................51
Appendix A ...............................................................................................................52
All manuals and user guides at all-guides.com

Ver:2.2
T4 series user’s manual III
About this user’s manual
Firstly, thank you for purchasing Sbarco’s T4 series printer. T4 printer could
provide you a reliable, easy and clear way to print all kind of labels and
barcodes you need.
This user’s manual is described with a large quantity of illustrations, let the
users understand, step by step, how to work this printer to its best. This
manual includes also the troubleshooting section which could provide a
pre-way to eliminate or find out the troubles, without the help of technician. If
users still cannot banish the troubles from the printer, please contact directly
the distributors.
All manuals and user guides at all-guides.com

All manuals and user guides at all-guides.com

Ver:2.2
T4 series user’s manual 1
1. Introduction
1.1 In the box
After unpacking, please inspect carefully and make sure that you receive all
the necessary parts as below:
Printer
Power supply
Power Cord (varies by country)
Software CD ROM
Quick start guide
USB cable
If any parts are missing, please contact the service department of your
distributor.
Save the carton and all packing materials in case you need to reship back.
All manuals and user guides at all-guides.com
all-guides.com

Ver:2.2
T4 series user’s manual 2
1.2 T4 Printer Features
1.2.1 Front view
1.2.2 Rear view
All manuals and user guides at all-guides.com

Ver:2.2
T4 series user’s manual 3
1.2.3 Interior view
Media roll holder
Media guide
Adjustable media
gap sensor
Platen roller
Cover-up sensor
Media holder
lock latch
Supply spindles
Printhead
Array sensors
Take up spindles
Tear-off blade
Dispenser (option)
Peel-off roller
Peeler sensor
Peeler bar
Dispenser cover
Media sensor
All manuals and user guides at all-guides.com

Ver:2.2
T4 series user’s manual 4
1.3 T4e Printer Features
1.3.1 Front view
1.3.2 Rear view
All manuals and user guides at all-guides.com

Ver:2.2
T4 series user’s manual 5
1.3.3 Interior view
All manuals and user guides at all-guides.com

Ver:2.2
T4 series user’s manual 6
2. Getting start
2.1 Loading the ribbon
1. Pulling the release latches on two sides toward the front of printer to open
the printer cover.
2. Open the ribbon cover by pushing the ribs (as shown in green) of ribbon
cover. Do not open the ribbon cover by pushing the cover edge which
installed the blade to tear off the label. It might hurt your hands if you push it
hardly.
All manuals and user guides at all-guides.com
all-guides.com

Ver:2.2
T4 series user’s manual 7
3. Insert the ribbon roll to the supply spindle.
4. Rotate the supply hub until the notches align and lock in to the left side of
supply hub.
All manuals and user guides at all-guides.com

Ver:2.2
T4 series user’s manual 8
5. Insert an empty media core into the take up spindle. Rotate the take up hub
until the notches align and lock on the left side of take up hub.
6. Pull the ribbon out from the roll and stick it with the adhesive tape on the
empty ribbon take up core.
All manuals and user guides at all-guides.com

Ver:2.2
T4 series user’s manual 9
7. Rotate the take up hub on the left side of ribbon spindle till the ribbon is
pulled tight.
Note: The loading path of ribbon roll (outside wound)
All manuals and user guides at all-guides.com

Ver:2.2
T4 series user’s manual 10
2.2 Loading the media
Whether the roll media is inside or outside wound, they could be used in this
printer and loaded in the same way.
1. Open the printer cover by pulling the release latch toward the front of
printer.
2. Press the holder latch and pull the media holders open. Place the media
roll on the holders and push media holder toward the roll by pressing the
holder latch. Release the latch when the media is on the holder firmly.
All manuals and user guides at all-guides.com

Ver:2.2
T4 series user’s manual 11
3. Pull the media so it could extend out the printer. Please make sure the
printing surface is facing up.
4. Before pushing the media under the guides, adjust the label senor to
appropriate position to detect the labels with gap, hole or black mark.
All manuals and user guides at all-guides.com
all-guides.com

Ver:2.2
T4 series user’s manual 12
5. Push the media under the both sides of guides.
All manuals and user guides at all-guides.com

Ver:2.2
T4 series user’s manual 13
Note: The loading path of label roll (inside and outside wound)
All manuals and user guides at all-guides.com

Ver:2.2
T4 series user’s manual 14
2.3 T4 Connecting interfaces
The following interfaces could be connected to PC to operate the printer:
2.3.1 Centronics port (Parallel port)
2.3.2 RS-232 port (Serial port)
All manuals and user guides at all-guides.com

Ver:2.2
T4 series user’s manual 15
2.3.3 USB Slave
2.3.4 Ethernet (Option)
All manuals and user guides at all-guides.com