Scala Player-S User instructions

Scala Inc. Confidential
Confidential © 2020 Scala Inc. All Rights Reserved Page 1 of 3
Setting Up the Player-S (R1305G)
Box Contents
Connecting the Cables
Completing Player Setup
EDID Emulation and Display Continuity
Detailed User Guide
Box Contents
SMP-S device
Power adapter
WiFi antenna; optionally 4G-LTE antenna
A rail-mounting kit with 2 brackets, torx screws, and torx key wrench
A quick start player guide insert
Device Images
Player-S
Required for Set-Up
In order to set up the Player-S unit, you will need:
Display screen
HDMI cable

Scala Inc. Confidential
Confidential © 2020 Scala Inc. All Rights Reserved Page 2 of 3
1.
2.
3.
4.
RJ-45 cable for wired networks
120V or 240V electrical outlet
Wireless mouse and keyboard
-or-
Laptop running and connected using an Ethernet crossover cabletnviewer.exe
Connecting the Cables
Connect the SMP-S unit to the display using the HDMI cable.
If using a network, plug a cable into the RJ-45 jack on the back of the unit. wired
If using a network, screw the included antenna into the antenna connector on the back of the unit.wireless
Plug the power cord into the power connector on the back of the unit.
Plug the power cord into a 120V or 240V electrical outlet.
Completing Player Setup
Before a new player is ready to use for playback, several setup tasks must be completed so that, for example, the player is connected to
your network, it can receive content from Content Manager, and it is properly configured for the display screens that you are using with
the player. Some of the setup tasks involve settings found in the player's Windows operating system, while other settings are found within
For instructions on completing setup, refer to .the Scala software that is installed on the player. Setting Up Windows Players
Additionally, the user guide PDF available on this page below provides more information relevant to setup and general operation.
To perform setup on the player, you can either simply connect a keyboard and mouse to the player or you can use a .remote connection
EDID Emulation and Display Continuity
The Player-S's AMD processor provides EDID emulation and display continuity features to help stabilize playback recovery in any
situations where the screen becomes disconnected from the player. While you can use the player without enabling this feature, if you want
to use it you need to configure the player's settings in the utility. Additionally, you may toEDID Emulation AMD Radeon Pro Settings
configure some settings in the AMD utility, although in many cases the default settings in this utility are acceptable.Display Continuity
For instructions on using these settings, refer to the user guide PDF document below.
Detailed User Guide
The document below provides detailed setup instructions and general information about both the Player-S and the (these playersPlayer-D
have similar internal components).
For concise setup instructions, refer to . Setting Up Windows Players

Scala Inc. Confidential
Confidential © 2020 Scala Inc. All Rights Reserved Page 3 of 3