Sceptre X322BV-MQCC User manual

- 1-
www.SCEPTRE.com
SCEPTRE X32 User Manual
Dear Sceptre Customer,
Congratulations on your new SCEPTRE X32 HD Display purchase. Thank
you for your support. To ensure safety and many years of trouble free
operation of your Sceptre Display, please read the manual carefully before
making any adjustments, and keep them in a safe place for future references.
We hope you enjoy your new SCEPTRE Display Unit.
For technical assistance, please call 1800-788-2878 and select option 3 or
email our tech support group at Sc[email protected].
For all other inquiries, please call 1800-788-2878 and select option 4 or
email our customer service group at [email protected]om. Live Chat
also available during business hours M-F 8:30AM-5:30PM.
We recommend you register your SCEPTRE HD Display Unit at our online
website http://www.sceptre.com/registration.html.
This display is MHL™ ready using HDMI 2.
This display does NOT have QAM support. For digital cable, you’ll need
a cable box.

- 2-
www.SCEPTRE.com
SCEPTRE X32 User Manual
IMPORTANT INFORMATION

- 3-
www.SCEPTRE.com
SCEPTRE X32 User Manual
SAFETY INSTRUCTIONS
Electricity is used to perform many useful functions, but it can also cause
personal injuries and property damage if improperly handled. This product
has been engineered and manufactured with the highest priority on safety.
However, improper use can result in electric shock and / or fire. In order to
prevent potential danger, please observe the following instructions when
installing, operating and cleaning the product. To ensure your safety and
prolong the service life of your Liquid Crystal Television, please read the
following precautions carefully before using the product.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.

- 4-
www.SCEPTRE.com
SCEPTRE X32 User Manual
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade and the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at
the plugs, convenience receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury from
tip-over.
13. Unplug this apparatus during lightening storms or when unused for long
periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as
powersupply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.
SAFETY INSTRUCTIONS
This product is designed and manufactured to operate within defined design limits, and
misuse may result in electric shock or fire. To prevent the product from being damaged, the
following rules should be observed for the installation, use and maintenance of the product.
Read the following safety instructions before operating the display. Keep these
instructions in a safe place for future reference.
•To avoid the risk of electric shock or component
damage, switch off the power before connecting other
components to the DISPLAY.
•Unplug the power cord before cleaning the DISPLAY.
Please use the included custom bezel cleaning cloth
for cleaning the bezel of the DISPLAY only. Do not
use a liquid or a spray cleaner for cleaning
the product. Do not use abrasive cleaners.
•Always use the accessories recommended
by the manufacturer to insure compatibility.
•When moving the DISPLAY from an
area of low temperature to an
area of high temperature,
condensation may form on the

- 5-
www.SCEPTRE.com
SCEPTRE X32 User Manual
housing. Do not turn on the DISPLAY
immediately after this to avoid causing fire,
electric shock or component damage.
•Do not place the DISPLAY on an
unstable cart, stand, or table. If the DISPLAY
falls, it can injure a person and cause serious
damage to the appliance. Use only a cart or
stand recommended by the manufacturer or
sold with the DISPLAY.
•Any heat source should maintain a distance of at least
5 feet away from the DISPLAY, i.e. radiator, heater,
oven, amplifier etc. Do not install the product too
close to anything that produces smoke or moisture.
Operating the product close to smoke or moisture
may cause fire or electric shock.
•Slots and openings in the back and bottom of the
cabinet are provided for ventilation. To ensure reliable
operation of the DISPLAY and to protect it from
overheating, be sure these openings are not blocked
or covered. Do not place the DISPLAY in a bookcase
or cabinet unless proper ventilation is provided.
•Never push any object into the ventilation slots of the
DISPLAY. Do not place any objects on the top of the
Product. It could short circuit parts causing a fire or
electric shock. Never spill liquids on the DISPLAY.
•Do not use the DISPLAY in a portrait format (by
rotating 90 degrees) under high temperature
environment (25°C or higher), since this would retard
heat dissipation and would eventually damage the
DISPLAY.
•The DISPLAY should be operated only from the type
of power source indicated on the label. If you are not
sure of the type of power supplied to your home,
consult your dealer or local power company.
•The power cable must be replaced when using
different voltage from that specified in the User
Manual. For more information, contact your dealer.
•The DISPLAY is equipped with a three-pronged
grounded plug, a plug with a third (grounding) pin.
This plug will fit only into a grounded power
outlet as a safety feature. If your outlet does not
accommodate the three-wire plug, have an
electrician install the correct outlet, or use an
adapter to ground the appliance safely. Do not
defeat the safety purpose of the grounded plug.
•Do not overload power strips and extension cords.
Overloading can result in fire or electric shock.
•The wall socket should be installed near the
equipment and should be easily accessible.
•Only the marked power source can be
used for the product. Any power source
other than the specified one may cause fire
or electric shock.
•Do not touch the power cord during
thunderstorms. To avoid electric shock,
avoid handling the power cord during
electrical storms.
•Unplug the unit during a lightning storm or
when it will not be used for a
long period of time. This will
protect the DISPLAY from
damage due to power surges.
•Do not attempt to repair or service the
product yourself. Opening or removing the
back cover may expose you to high
voltages, the risk of electric shock, and
other hazards. If repair is required, please
contact your dealer and refer all servicing
to qualified service personnel.
•Keep the product away from moisture. Do
not expose this appliance to rain or
moisture. If water penetrates into the
product, unplug the power cord and
contact your dealer. Continuous use in this
case may result in fire or electric shock.
•Do not use the product if any abnormality
occurs. If any smoke or odor becomes
apparent, unplug the power cord and
contact your dealer immediately. Do not try
to repair the product yourself.
•Avoid using dropped or damaged
appliances. If the product is
dropped
and the housing is damaged, the internal
components may function abnormally.
Unplug the power cord immediately and
contact your dealer for repair. Continued
use of the product may cause fire or
electric shock.
•Do not install the product in an area with
heavy dust or high humidity. Operating the
product in environments with heavy dust or
high humidity may cause fire or electric
shock.
•Hold the power connector when removing
the power cable. Pulling the power cable
itself may damage the wires inside the
cable and cause fire or electric shocks.

- 6-
www.SCEPTRE.com
SCEPTRE X32 User Manual
When the product will not be used for an extended
period of time, unplug the power connector.
•To avoid risk of electric shock, do not touch the
connector with wet hands.
•Insert batteries in accordance with instructions while
using the remote control. Incorrect polarities may
cause damage and leakage of the batteries, operator
injury and contamination the remote control.
•If any of the following occurs please contact the
dealer:
oThe power connector fails or frays.
oLiquid sprays or any object
drops into the DISPLAY. o
The Display is exposed to
rain or other moisture.
oThe Display is dropped or
damaged in any way.
oThe performance of the Display
changes substantially.
•Operating environment: Temperature: 5°C
~ 35°C, Humidity: 10% to 90% non-
condensing, Altitude: 0~10,000 ft.
IMPORTANT INFORMATION
Television Antenna Connection Protection**
External Television Antenna Grounding
If an outside antenna or cable system is to be connected to the display, make sure that
the antenna or cable system is electrically grounded to provide some protection against
voltage surges and static charges. Article 810 of the National Electrical Code,
ANSI/NFPSA 70, provides information with regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of
the grounding conductors, location of antenna discharge unit, connection to grounding
electrodes, and requirements of the grounding electrode.

- 7-
www.SCEPTRE.com
SCEPTRE X32 User Manual
Lightning Protection
For added protection of the display during a lightning storm or when it is left unattended
or unused for long periods of time, unplug the display from the wall outlet and
disconnect the antenna or cable system.
Power Lines
Do not locate the antenna near overhead light or power circuits, or where it could fall
into such power lines or circuits.
**TV tuner optional
Opening the Package
The SCEPTRE DISPLAY is packaged in a carton. Any standard accessories are packed
separately in another carton. The weight of the DISPLAY is approximately 9.75 lbs. Due
to the size and weight of the product, it is suggested that it must be handled by a
minimum of 2 or more persons. Since the glass can be easily scratched or broken,
please handle the product gently. Never place the unit on a surface with the glass facing
downwards unless it is on protective padding. When opening the carton, check that the
product is in good condition and that all standard accessories and items are included.
Save the original box and all packing materials for future shipping needs.

- 8-
www.SCEPTRE.com
SCEPTRE X32 User Manual
Package Contents
SCEPTRE Display x 1
Display Base x 1
Thick Threaded Screws x 3
Circular Metal Plate x 1
Black Plastic Ring x 1
Screw driver x 1
Power Cord x 1 (attached)
Warranty Card x 1
Display Remote Control (AAA Batteries included) x 1
User Guide x 1 (Complete manual available online at sceptre.com)
Installation
Please read the user manual carefully before performing the installation. The power
consumption of the display is approximately 28 watts. Please use the power cord
designated for the product. When an extension cord is required, use one with the correct
power rating. The cord must be grounded and the grounding feature must not be
defeated. The product should be installed on a flat surface to avoid tipping. Space
should be maintained between the back of the product and the wall for proper
ventilation. If you would like to mount the display onto the wall, please see page 8, and
10 for additional information. Avoid installing the product in the kitchen, bathroom or
other places with high humidity dust or smoke, so as not to shorten the service life of the
electronic components. Please ensure the product is installed with the screen in
landscape orientation. Any 90° clockwise or counterclockwise installation may induce
poor ventilation and successive component damage.
Attaching or Removing the Stand

- 9-
www.SCEPTRE.com
SCEPTRE X32 User Manual
1. To install or remove the neck, screw in or remove the 4 screws indicated in the
picture.
2. To install the base, place the display unit flat on a table. Afterwards attach the
plastic base onto the neck. Remember the plastic base should have more area
facing the front of the neck. Fit the black plastic ring to the bottom of the base,
then the metal plate onto the bottom of the base by matching the 3 holes. Screw in
the 3 thick threaded screws to secure the metal plate to the plastic base.
3. To finalize your installation of the Display, please read the following:
a. If you are placing the Display on a stand, we would recommend you to
use a Display safety strap (not included) in order to minimize the
possibility of the Display toppling over.
b. If you are mounting the Display on the wall
c. Make sure the wall is structurally safe for the weight of the Display
d. Make sure the wall mount kit is compatible with the Display

- 10 -
www.SCEPTRE.com
SCEPTRE X32 User Manual
e. Read and follow all instructions provided by the wall mounting kit.
f. Securely install all screws and connections.
Table of Contents
IMPORTANT INFORMATION...............................................................2
SAFETY INSTRUCTIONS ....................................................................3
SAFETY INSTRUCTIONS ....................................................................4
IMPORTANT INFORMATION...............................................................6
Television Antenna Connection Protection** ....................................6
Opening the Package..........................................................................7
Package Contents................................................................................8
Installation............................................................................................8
Attaching or Removing the Stand......................................................8
Table of Contents ..............................................................................10
Identifying Front and Rear Panel .....................................................13
Front View .......................................................................................13
Rear View Mounting Pattern ...........................................................14
Side Control Buttons .......................................................................14
Rear View Connections...................................................................16
Rear View Connections (alternate version).....................................17
SCEPTRE Remote Control................................................................19
Installing Batteries to the Remote Control.......................................25
Connection Suggestions ..................................................................25
If You Have Digital Cable without Cable Box or Antenna…............26
Connecting DVD Player with Component YPbPr… ........................27
Connecting Wii™ with Composite… ...............................................28
Connecting Cable or Satellite boxes with HDMI…..........................29
Connecting to a PC with VGA and 3.5 mm minijack … ..................30
Connecting a Digital Audio Receiver with Coax SPDIF… ..............31
If You Have Antenna (alt)… ............................................................32
Connecting DVD Player with Component YPbPr (alt)… .................34
Connecting Wii™ with Composite (alt)… ........................................35
Connecting Cable or Satellite boxes with HDMI (alt)… ..................36
Connecting to a PC with VGA and 3.5 mm minijack (alt) … ...........37
Connecting a Digital Audio Receiver with Optical SPDIF (alt)… ....39
Switching Sources.............................................................................40
Ready to Watch Some HD video?....................................................41

- 11 -
www.SCEPTRE.com
SCEPTRE X32 User Manual
If You’ve Connected Antenna to the display…...............................41
OSD (On Screen Display) Controls................................................. 42
Via Remote Control ........................................................................ 42
Via Display Side Panel Buttons...................................................... 43
OSD (On Screen Display) Options .................................................. 43
PICTURE........................................................................................ 44
SOUND........................................................................................... 46
CHANNEL....................................................................................... 49
PARENTAL..................................................................................... 50
SETUP............................................................................................ 51
OTHERS......................................................................................... 53
Detailed Explanations.......................................................................54
USB Connection Explained ............................................................54
Closed Captioning (digital and analog) Explained.......................... 56
MHL Explained ............................................................................... 57
Direct Function Buttons.................................................................. 58
ROKU Function Buttons................................................................. 59
Ratings Explained...........................................................................60
Aspect Ratio Explained .................................................................. 62
Shortcuts to Browsing Channels ....................................................63
How do I clean the display ?........................................................... 64
Troubleshooting................................................................................64
Call Us If You Need Help!.................................................................69
Specification......................................................................................70
LIMITED PRODUCT WARRANTY.....................................................72
Disclaimer, Trademarks, & Copyright Information........................74
FCC Compliance Statement............................................................. 75
Recycling Information ......................................................................76

- 12 -
www.SCEPTRE.com
SCEPTRE X32 User Manual

- 13 -
www.SCEPTRE.com
SCEPTRE X32 User Manual
Identifying Front and Rear Panel
Front View
INDICATOR LIGHT –The light is red when power is plugged in but the display is not turned on. The
light turns blue when the display is turned on. The display might take 10 –12 seconds to power
on. This is considered to be normal.
REMOTE SENSOR –The remote sensor receives all the commands from the remote control.

- 14 -
www.SCEPTRE.com
SCEPTRE X32 User Manual
Rear View Mounting Pattern
Mounting Specification: 200mm x 200mm using screw size M6. Length of screw should not exceed
10mm. Please Note: The 10mm length of screw refers to how deep the screw can go inside the
mounting holes. When you’re buying screws, you should add the original 6mm to the thickness of
your mounting plate in order to get the total screw length.
Side Control Buttons

- 15 -
www.SCEPTRE.com
SCEPTRE X32 User Manual
1. VOL(+) –This button increases the display’s volume. If a sub-menu is active,
pressing this button will move the select right.
2. VOL(-) –This button decreases the display’s volume. If a sub-menu is active,
pressing this button will move the selection left.
3. CH(▲)–This button changes the display channel up. If the OSD is active, this
button functions as up for the menu.
4. CH(▼)–This button changes the display channel down. If the OSD is active, this
button functions as down for the menu.
5. MENU –This button activates the On Screen Display (OSD). If a sub-menu is
active, pressing this button will exit the OSD.
6. SOURCE –This button switches between all the different sources of the display.
When the OSD is active, this button acts as the enter button and confirms the
menu selection.
7. POWER –Turn on the display by pressing the button once. Press the button
again to turn off the display.

- 16 -
www.SCEPTRE.com
SCEPTRE X32 User Manual
Rear View Connections
1. HEADPHONE –This connection is for headphones to be attached to
the display.
2. SPDIF - This connection port is used for sending out digital audio
signals to digital surround sound receivers. The black (Optical SPDIF
OUT) connector sends out either bit-stream or PCM digital sound
signal to a home theater receiver with digital optical input.
3. Analog Audio Out –This connection is for connecting to analog
audio receivers using red / white RCA jacks.
4. AV –Video connects to devices that use composite video cables
such as VCR or DVD player or Wii™. Connect the yellow for video
and the red / white for audio. This port shares the audio jacks with
YPbPr.
5. YPbPr –This connection port is for DVD players or satellite / cable
set-top boxes that use component cables. From left to right, connect
green, blue, and red for video, and then connect white for left channel
audio, and red for right channel audio. This port shares the audio
jacks with AV.

- 17 -
www.SCEPTRE.com
SCEPTRE X32 User Manual
6. USB –USB connects to USB flash drives for playing music and
picture. The USB port is also used for updating the display’s
firmware.
7. TV (optional) –This connection is for analog cable without the cable
box or over-the-airwave antennas. The tuner is a hybrid tuner that
tunes to both analog and digital channels. This connection uses
coaxial RF cable. For over-the airwave digital stations please check
http://www.antennaweb.org.This tuner DOES NOT support QAM.
For digital cable, you WILL need a cable box.
8. HDMI1-3 –HDMI connects to devices that use HDMI cable, such as
Blu-ray or HD DVD player, or HD cable / satellite set-top box. This
connection port receives pure digital audio and high definition signal
through one single cable. This port also can accept a HDCP video
device for video. HDMI 2 also doubles as the MHL connection for cell
phones. MHL is a protocol where the display will show what your cell
phone screen shows. If your cell phone supports MHL you can
purchase a MHL cable from any electronic store and connect it to
HDMI 2 and also your cell phone. Make sure the display’s source is
changed to HDMI 2 and turn on your cell phone. You should see an
image of your cell phone screen. HDMI 2 also supports ROKU™
streaming stick. Plug the ROKU stick to HDMI 2, and switch your
source to HDMI2. Afterwards use the purple colored buttons to
access ROKU functions.
9. PC Audio In - This connection port is for people who want to provide
audio to the display when using a PC or a DVI video device. The
sources use 3.5mm mini-jack audio cable.
10. VGA - This connection port connects to a PC for video using VGA
cable. Be sure to connect your audio cable to the VGA Stereo input if
you want sound out of VGA video source.
Please Note:
•This display features a power saving function which will turn off
the display automatically after 10 minutes of idling on a
connection with no signal. This feature is present on all
connection.
•This display does NOT support QAM under (the optional) TV
tuner.
Rear View Connections (alternate version)

- 18 -
www.SCEPTRE.com
SCEPTRE X32 User Manual
1. HEADPHONE –This connection is for headphones to be attached to
the Display.
2. SPDIF - This connection port is used for sending out digital audio
signals to digital surround sound receivers. The orange (Coaxial
SPDIF OUT) connector sends out either bit-stream or PCM digital
sound signal to a home theater receiver with digital optical input.
3. YPbPr / AV –This connection port is for DVD players or satellite /
cable set-top boxes that use component cables. From left to right,
connect green, blue, and red for video, and then connect white for left
channel audio, and red for right channel audio. For AV, connect the
yellow cable to the green port then use red and white for audio. 4.
HDMI –HDMI connects to devices that use HDMI cable, such as Blu-
ray or HD DVD player, or HD cable / satellite set-top box. This
connection port receives pure digital audio and high definition signal
through one single cable. This port also can accept a HDCP video
device for video. HDMI 2 also doubles as the MHL connection for cell
phones. MHL is a protocol where the Display will display what your
cell phone displays. If your cell phone supports MHL you can
purchase a MHL cable from any electronic store and connect it to
HDMI 2 and also your cell phone. Make sure the Display’s source is
changed to HDMI 2 and turn on your cell phone. You should see an
image of your cell phone screen. HDMI 2 also supports ROKU™
streaming stick. Plug the ROKU stick to HDMI 2, and switch your

- 19 -
www.SCEPTRE.com
SCEPTRE X32 User Manual
source to HDMI2. Afterwards use the purple colored buttons to
access ROKU functions.
5. HDMI 2 –HDMI connects to devices that use HDMI cable, such as
Blu-ray or HD DVD player, or HD cable / satellite set-top box. This
connection port receives pure digital audio and high definition signal
through one single cable. This port also can accept a HDCP video
device for video.
6. HDMI 3 –HDMI connects to devices that use HDMI cable, such as
Blu-ray or HD DVD player, or HD cable / satellite set-top box. This
connection port receives pure digital audio and high definition signal
through one single cable. This port also can accept a HDCP video
device for video.
7. VGA - This connection port connects to a PC for video using VGA
cable. Be sure to connect your audio cable to the VGA Stereo input if
you want sound out of VGA video source.
8. PC Audio In - This connection port is for people who want to provide
audio to the Display when using a PC or a DVI video device. The
sources use 3.5mm mini-jack audio cable.
9. DT (Optional) –This connection is for analog cable without the cable
box or over-the-airwave antennas. The tuner is a hybrid tuner that
tunes to both analog and digital channels. This connection uses
coaxial RF cable. For over-the airwave digital stations please check
http://www.antennaweb.org.This tuner DOES NOT support QAM.
For digital cable, you WILL need a cable box.
10. USB –USB connects to USB flash drives for playing music and
picture. The USB port is also used for updating the Display’s
firmware.
Please Note:
•This Display features a power saving function which will turn off
the Display automatically after 10 minutes of idling on a
connection with no signal. This feature is present on all
connection.
•This Display does NOT support QAM under Display tuner.
•TV Tuner is optional. It may not be equipped in your product.
Please check with seller, authorized distributor or Sceptre
Customer Services.
SCEPTRE Remote Control

- 20 -
www.SCEPTRE.com
SCEPTRE X32 User Manual
This remote control follows SONY’s universal remote code. To find the actual code you need
to consult your cable or satellite tech support.
For universal remotes, this display follows SONY’s universal remote code. You need to find
the actual code from your cable or satellite or universal remote provider. The button order is
from left to right.