Schenley SLFCWD064 User manual

Schenley Wet Dry
Vacuum Cleaner
Be Simple, Be Noble.
User Manual

Dear Customer,
Sincerely,
Your Schenley Team
Thank you for choosing Schenley Wet Dry Vacuum
Cleaner. At Schenley we strive to bring the best home
cleaning experience through our products and services.
The Schenley wet dry vacuum cleaner is a remarkable
solution for deep floor cleaning. With our powerful
brush motor and high-power suction fan, the product
can easily pick up wet and dry messes like water,
milk, ketchup, jams, dirt, sand, debris, pet hair, etc. The
cleaner is capable of cleaning all sealed hard floors like
hardwood, tile, laminate, vinyl, marble, linoleum, etc.
With the clean water tank constantly rinsing the roller
brush and the dirty water tank collecting the messes,
the Schenley wet dry vacuum cleaner wipes the floor 100
times better than regular mops and relief you from the
hassle to clean the mop pads constantly.
This User Manual aims to provide you with guidelines on
how to operate your Schenley wet dry vacuum cleaner
and important safety instructions. Any use that does
not conform to the guidelines described in this manual
may void the limited warranty. Please read the complete
instructions carefully before using the appliance and
retain it for future reference. Once again thank you for
being a valued Schenley customer.
Schenley
Introduction
2
THANK YOU!
If you follow the operating and care instructions in this
manual, your Schenley wet dry vacuum cleaner will provide
you with a long time reliable service.
Table of Contents
Cover Page
Introduction
Table of Contents
Safety Warnings
Features and Attachments
Assemble Your Wet Dry Vacuum Cleaner
Operate Your Wet Dry Vacuum Cleaner
Clean & Maintenance
Technical Specifications
Troubleshooting
Warranty and Customer Service
1
2
3
4
7
10
12
16
19
20
22
3
Congratulations on your purchase and
welcome to the Schenley family.

Safety Warnings
• Do not allow children to use this vaccum cleaner.
• Do not allow children to play with this device or any
of its accessories.
• Keep all packaging material out of reach of children
to avoid the danger of suffocation.
• This device may be used by persons with reduced
physical, sensory or mental capacities, provided
they are supervised or have been trained in the
safe use of the appliance and understand the
potential danger.
To reduce the risk of
danger to children and
people with restricted
capabilities:
To reduce the risk of
fire, electric shock, or
injury:
4
• Only use the adapter/plug that came with the
product or adapters specied by Schenley.
• Do not use other adapters to charge the product.
• Do not use the adapter to charge other products.
• Ensurethe power supply voltageis withinthe required
range specied in the technical specication. Use
AC power supply with rated voltage, do not use DC
power supply.
• If the adapter/plug is damaged or have exposed
components, do not use it to avoid the danger of
electric shock.
• Do not pour water on the adapter/plug or immerse it
in water as this could result in electric shock.
• Do not pour water on the charging base or immerse
it in water as this could damage the charging base
or result in electric shock.
WARNING:
WARNING:
Please read all instructions and safety warnings carefully before using
your Schenley wet dry vacuum cleaner. If you give this product to
others, please remember to give them these instructions as well.
This appliance contains batteries that are only replaceable by skilled
persons.
Polarized Plug: As a safety feature, this cleaner uses a polarized plug,
meaning one blade is wider than the other. This plug will fit into a
polarized outlet only one way. If the plug does not fit into the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician. Do
not attempt to defeat this safety feature.
To reduce the risk of
injury and product
damage:
• Keep ngers, hair, loose clothing, or any part of the
body away from the opening and moving parts of
the appliance and its accessories.
• Always place the cleaner in the upright position. Do
not ip it upside-down or lay it at as the water may
enter the motor causing motor damage.
• Do not operate the device without lters in place as
it may damage the motor.
• Only use supplied accessories for the product. Do
not add other cleaning agents to the clean water
tank as it may damage the water path causing clog
or material deterioration.
• Do not use the device when the HEPA lter is wet, as
it may reduce suction performance of the device.
Ensure the lter is dry before installing it.
• Do not use the product to pick up ammable or
combustible liquids, such as petroleum, ethanol, or
use the device in areas where they may be present.
• Do not pick up toxic material such as chlorine bleach,
ammonia, drain cleaner, etc. Do not pick up hard or
sharp objects such as glass, nails, screws, etc.
• Do not pick up any burning or smoking objects,
for example, unextinguished heat source, ashes,
burning cigarette butts or matches, etc.
• Do not pull or carry by cord or pull the cord around
sharp edges or corners.
• Remove the adapter/plug from the power socket
before cleaning and maintaining the adapter or the
charging base to avoid electric shock and injury.
• When there is abnormal deformation of the product
body, burning smell, or sound while the product is
charging or in operation. Please immediately cut off
the power and unplug the adapter/plug.
• When disposing the device, safely cut the main
cable to ensure that it can no longer be used. The
battery must be removed from the appliance before
it is scrapped to avoid explosion or re.
• Do not use with damaged cord or plug. If the device
is not working as it should or has been dropped,
damaged, left outdoors, or dropped into water, do
not attempt to repair it by yourself. Please contact
our customer service: schenleycare@schenleytech.
com. Incorrect reassembly or repair may cause a
risk of electrical shock or injury.
Safety Warnings
5
WARNING:

Safety Warnings
• Please check the waste inlet and the dirty water hose
regularly. If there is blockage, please remove it in
time to avoid reduction in vacuum power.
• After using the appliance, please clean the dirty
water tank in time and keep the air passage clear of
wastes to avoid odor or contaminations.
• Do not use appliance that is damaged or modied.
Damaged or modied electrical components and
batteries may exhibit unpredictable behavior
resulting in re, explosion, or risk of injury.
• Do not expose the appliance to extreme sunlight,
frost, rain, or snow.
• Store the appliance in a cool, dry location. Do not
store the appliance in the vicinity of gas or electric
cookers, heaters, or ovens.
• Do not expose the appliance to re or excessive
temperature. Exposure to re or temperature above
130 °F may cause an explosion.
• If the appliance is not intended to use for an extended
period of time, please turn off the power and unplug
the power adapter.
• This product is suitable for hard oor in indoor
environment, including waxed oor, stone oor,
rubber oor, marble oor, granite oor, terrazzo oor,
solid wood oor, composite oor, bamboo oor and
various mirror tiles, porcelain tiles and other at
surfaces. For optimal performance, please use the
product on even ground surfaces.
6
1. KEY PARTS AND COMPONENTS
Features and Attachments
7
The images in this User Manual are for illustrative
purposes only. The actual product may differ. We
recommend replacing your roller brush and HEPA ler
every 2-3 months to avoid odor or contamination. You
may purchase replacement parts and other accessories
through Schenley.
HEPA Filter
Roller Brush Cleaning Brush Main Body
Charging BaseAccessories Holder
Note:
Handle AssemblyPower Adapter

Features and Attachments
8
2. SCHENLEY WET DRY VACUUM CLEANER
On/Off Button
Handle
Self-cleaning Button
Voice Speaker
Clean Water Tank
Release Button
Clean Water Tank
Wheels
Mode Switch Button
Water Spray Button
Aluminum Rod
Voice Prompt Button
LED Display
Dirty Water Tank Release Button
Dirty Water Tank
Roller Brush Cover Plate
Roller Brush
Roller Brush Pull Ring
Water Spray Nozzle
3. CHARGING BASE
Features and Attachments
9
Smart Mode
Suction-Only Mode
Sanitization Mode
Self-Cleaning Indicator
Low Battery Alert
Clean Water Tank Alert
Battery Status
Voice Prompt Indicator
Dirty Water Tank Alert
Cleanliness Indication Ring
Charging Contact Plate
Charging Port
Air Outlet
4. DISPLAY SCREEN

Assemble Your Wet Dry Vacuum Cleaner
1. Installation of the Handle Assembly:
10
The handle assembly is consisted of
a handle and an aluminum rod. Align
the end of the rod to the top surface of
the cleaner main body where there is a
circular hole. Grab onto the rod firmly
and insert the rod into the circular hole.
After hearing a click sound, the handle
assembly is installed in place. Ensure
that the handle is tightly clicked in.
ASSEMBLE
DISASSEMBLE
To disassemble the handle assembly, use a flat-head
screw driver to reach into the hole on the back of the
cleaner main body. Press down into the hole firmly
and at the same time pull the rod upward to release
the handle assembly from the cleaner main body.
2. Mounting of the Accessories:
Assemble Your Wet Dry Vacuum Cleaner
11
Install the accessory holders into the charging base as indicated.
Connect the charging cord to the charging port and plug in the adapter to
the power supply.

12
Operate Your Wet Dry Vacuum Cleaner
1. Charge Your Wet Dry Vacuum Cleaner:
Place the charging base on a at surface. After connecting the power cord to the
power supply, align the back of the cleaner with the charging contact plate. Slowly
place the cleaner on top of the charging contact plate. As the cleaner sits in place,
LED display and voice prompt will indicate charging status. Ensure the cleaner is in
full contact with the charging contact plate.
• If the appliance is not intended to be
used for an extended period of time,
please turn off the power and unplug
the power adapter.
• When the appliance is fully charged, it
will automatically stop charging. If it is
still charging after the normal charging
time, please unplug the power adapter
immediately and contact Schenley
customer service.
• When disposing the device, safely cut
the main cable to ensure that it can no
longer be used. The battery must be
removed from the appliance before it
is scrapped to avoid explosion or re.
• Please dispose the battery safely and
properly. Do not put it into re, water or
soil.
WARNING:
Operate Your Wet Dry Vacuum Cleaner
13
2. Fill the Clean Water Tank:
3. Clean the Dirty Water Tank:
1. Press down the release button of the clean
water tank and remove the tank from the cleaner
main body.
1. Press down the release button of the dirty water tank
and remove the tank from the cleaner main body.
3. Fill water through the water inlet. Close the
water inlet lid after lling.
2. Open the water inlet lid by pulling it down.
2. Pull to open the top cover of the dirty water tank.
Do not allow dirty water to contact the HEPA lter.
4. Align the clean water tank with the cleaner main
body, press down the release button and push
inward. After hearing a “click” sound, the tank is
installed successfully.
NOTE: Only add water or Schenley specied cleaning agent to the clean water tank.

14
Operate Your Wet Dry Vacuum Cleaner
4. Start Cleaning
3. Pour out the dirty water and rinse the tank with
clean water.
4. Align the dirty water tank with the cleaner main
body, press down the release button and push inward.
After hearing a “click” sound, the tank is installed
successfully.
NOTE: If dirty water contacts with the HEPA lter, use clean water to rinse the lter and leave it dry
before using it again. Use of wet lter may reduce the vacuum performance of the appliance.
It is recommended to replace the HEPA lter every 2-3 months.
Press the mode switch button to change
in between three cleaning modes.
1. Smart Mode: The cleaner will detect the cleanliness
of the oor and adjust its suction power accordingly.
The cleanliness indication ring will display oor
cleanliness accordingly.
2. Suction-Only Mode: The cleaner will only provide
suction power and do not disperse water. Use this
mode when there is an excessive amount of liquid on
the oor. The cleanliness indication ring will display
oor cleanliness accordingly.
3. Sanitization Mode: The cleaner will generate
electrolytic water in the clean water tank to be used
for cleaning. Other functions of the cleaner remain
the same as the smart mode.
Smart Mode
Sanitization Mode
Suction-Only Mode
15
Operate Your Wet Dry Vacuum Cleaner
Press the water spray button to spray
water to the front of the cleaner. This will
allow water to be dispensed precisely to
the desired cleaning area.
• Do not use the cleaner to clean foam
as it may clog the tube and damage
the motor.
• Do not tilt the machine more than 140°
to avoid water leakage.
• In order to prevent dirty water from
owing out, do not lay the machine at
or shake the body violently, so as not to
damage the internal components by
liquid backow.
WARNING:
Standby Mode: The cleaner has a safety
protection mechanism. When the cleaner
main body is tilted to the upright position,
the cleaner will automatically enter
standby mode. To start the appliance
again, simply tilt the cleaner main
body backward to more than 90°, the
appliance will resume working.
Press the On/Off button to power on the
cleaner and starts cleaning. Press the
On/Off button again to shut it off.

16
Clean & Maintenance
1. Self-Cleaning Function:
After using Schenley wet dry vacuum cleaner, place the appliance back to the
charging base. Ensure that the clean water tank has sufcient water. Press the
self-cleaning button on the right side of the cleaner body to initiate self-cleaning.
The self-cleaning indicator on the LED display screen will illuminate once self-
cleaning starts. After cleaning the roller brush, the air-dry system on the charging
base will automatically turn on. Cool air will come out from the air outlet to dry the
roller brush. Press the self-cleaning button again to end the air-dry function.
• Do not pour water on the charging
base or immerse it in water as this
could damage the charging base or
result in electric shock.
• After using the appliance, please clean
the dirty water tank in time and keep
the air passage clear of wastes to
avoid odor or contaminations.
• Regular cleaning and maintenance
of the cleaner, the roller brush, the
vacuum hose is required.
WARNING:
Clean & Maintenance
2. Clean your Wet Dry Vacuum Cleaner
Please shut down the cleaner before cleaning your device.
1. Press down the release button of the dirty water tank
and remove the tank from the cleaner main body.
3. After removing the dirty water tank, pull to open the
top cover and pour out the dirty water. Take out the
HEPA lter and separate it from the tank top cover.
5. Use the complimentary cleaning brush to reach down
into the vacuum hose to clear any residual wastes.
2. Gently wipe the detection sensor on both sides of
the cleaner with a rag or wet paper towel.
4. Rinse the top cover and the HEPA lter with clean
water. Wait until the HEPA lter is completely dry
before placing it back to the top cover.
6. Use a rag or wet paper towel to clean the detection
sensor window on both sides of the top cover and
install it back to the cleaner main body.
17
• Ensure the HEPA lter is installed before
using the cleaner. Failures to do so may
result in motor damage.
• Ensure the HEPA lter completely dry
before installing it to the cleaner.
WARNING: • Failures to do so may result in reduced
suction performance.
• Clean the detection sensor regularly
to avoid reduced performance of the
cleaner.

18
Clean & Maintainance
3. Clean Roller Brush & Cover Plate
• Do not rinse the cleaner main body directly with water as it may
damage the electrical components.
• After cleaning the roller brush cover plate with water, please
wipe the residual water off completely.
• Ensure the roller brush is installed rmly in place before starting
the cleaner. Failure to do so may result in product damage and
human injury.
• We recommend replacing your roller brush and HEPA ler every
2-3 months to avoid odor or contamination. You may purchase
replacement parts and other accessories through Schenley.
WARNING:
1. Press and hold the cover plate release button with
two ngers at the same time and then pull it up to
remove the cover plate.
3. To remove the roller brush, rst pull the roller brush
pull ring outward 90° and then pull the roller brush out
completely.
2. Rinse the cover plate with water and wipe it with
cloth or paper towel and then install it back to the
original position.
4. Clean the roller brush with clean water and install
it back to the original position.
Technical Specifications
19
Product Name
Product Model
Rated Power
Rated Voltage
Output Voltage
Adapter Voltage
Charging Time
Clean Water Capacity
Dirty Water Capacity
Noise Level
Net Weight
Color
Dimension (L x W x H)
Roller Brush Length
Warranty
Schenley Wet Dry Vacuum Cleaner
SLFCWD064
250W
21.6V
27.5V
100-240V~ 50/60Hz 0.8A Max
About 4.5±0.5H
25 FL. OZ
27 FL. OZ
≤78 dB(a)
9.9 LBS
Schenley Magenta & Noble Gray
43.5 x 10.9 x 11.0 IN
9.8 IN
1 Year

20
Issue Scenarios
The cleaner
does not work
No suction or
weak suction
power
The vacuum
fan is making a
strange noise
Possible Reasons
The cleaner is out of battery. Charge the cleaner by placing it
on the charging base.
The cleaner is in the upright
position.
The suction inlet or the
vacuum hose is clogged.
Service time is too long, and
the temperature is too high.
Tilt the cleaner main body to
active it.
Remove any clogging in the
vacuum hose.
Leave the cleaner to cool down for
15 minutes before using it again.
Solutions
Troubleshooting
The roller brush has not
been installed in place or
the roller brush is stuck.
Roller brush is entangled
with objects such as hair
Too much dirty water in the
dirty water tank.
Install the roller brush properly.
Clean the roller brush.
Empty the dirty water tank.
The dirty water tank is not
installed properly.
Rolling brush or the dirty
water tank is not installed
properly.
The main suction opening is
blocked.
Install the dirty water tank
properly.
Reinstalled the roller brush and
the dirty water tank.
Clear any blockage in the main
suction opening.
The dirty water tank is full.
The lter is wet or clogged.
The lter is wet or clogged.
The dirty water tank is full. Empty
the dirty water tank.
Clean the lter and leave it dry
before installing it to the cleaner.
Clean the lter and leave it dry
before installing it to the cleaner.
Troubleshooting
21
Issue Scenarios
Self-cleaning
function does
not work
Brush does not
turn
The cleaner
does not charge
Water leaking
from the top of
the dirty water
tank
No water
comes out of
the cleaner
Possible Reasons
Roller brush may be stuck. Open roller brush cover and
clear the stuck.
The cleaner is not charging.
Roller brush is entangled
with objects such as hair.
Abrupt handling or tilting
the cleaner more than 140
degrees causing water
leakage.
Ensure the cleaner is placed
properly on the charging base.
Clean the roller brush.
Do not ip it upside-down or lay
it at as the water may enter the
motor causing motor damage.
Solutions
The battery is less than
20%, and cannot start self-
cleaning.
Roller brush is not installed
properly.
Charge the cleaner and restart
self-cleaning.
Reinstalled the roller brush.
The dirty water tank is not
installed properly or full.
The power adapter is not
plugged in properly.
The clean water tank is
empty or it is not installed
properly.
Install the dirty water tank
properly. Ensure it is not full.
Ensure the power adapter is
inserted fully on both ends.
Fill the clean water tank and
installed it properly.
The clean water tank is not
installed properly.
The cleaner is not
connected to the charging
base correctly.
Install the clean water tank
properly.
Make sure the cleaner is in
place.

Schenley warrants to the original retail purchaser that Schenley wet dry vacuum
cleaner will be free from defects in material and workmanship for one year from the
date of original purchase. This warranty applies to product used for personal purposes,
and not for commercial or rental purposes.
To receive warranty service, the original customer purchaser should contact Schenley
customer service for immediate assistance. Proof of purchase in the form of a bill of sale
or receipt invoice, indicating that the wet dry vacuum cleaner is within the warranty
period, must be presented in order to obtain the requested services. In accordance
with applicable law, Schenley may request you to provide additional documents
before receiving warranty service. Please contact Schenley customer service for more
details: [e-mail].
Please be aware the shipping expenses to return the product to Schenley servicing
address are not covered by this warranty and must be paid by the customer.
If a hardware defect arises and a valid claim is received within the warranty period,
Schenley, at its sole option and to the extent permitted by law, will either a) repair
the defect at no charge, using new or refurbished replacement parts, b) exchange
the product with a product that is new or which has been manufactured from new or
serviceable used parts and is at least functionally equivalent to the original device, or
c) refund the purchase price of the product.
A replacement product or part thereof shall enjoy the warranty of the original product
for the remainder of the warranty period, or 90 days from the date of replacement
or repair, whichever provides you longer protection. Refunds can only be given if the
original product is returned.
This warranty does not apply to:
1) Any non-Schenley wet dry vacuum cleaner product or accessories even if packaged or sold with the product;
2) Damage caused by use with non-Schenley wet dry vacuum cleaner product or accessories;
3) Damage caused by accident, abuse, misuse, ood, re, earthquake, or other external causes;
4) Damage cause by operating the product outside permitted or intended uses;
5) Damage cause by modifying the product or parts;
6) Consumable parts, such as batteries, fuses, and lights;
7) Cosmetic damage.
Warranty and Customer Service
22
EXCEPTIONS AND EXCLUSIONS
Twitter: @SchenleyTech
Instagram: @SchenleyTech
Facebook: www.facebook.com/SchenleyTech
Youtube: www.youtube.com/c/Schenley
Warranty And Customer Service
This warranty is only valid in the country where it is purchased and only applies to
product purchased in that country.
If your product should require service:
You may contact us through [e-mail] or visit our website
www.schenleytech.com to have a customer care specialist to assist you.
If you like our products, please subscribe to our channels:
23