XPOtool 62641 User manual

Operation Manual
Wet/dry Vacuum Cleaner 1600 W
62641
Similar to image, may vary depending on model
Read and follow the operating instructions and safety information before use.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical data can differ slightly.

https://www.XPOtool.com Item 62641 Page 2
The Tool Experts
05 2022-1
The information contained in this document may alter at any time without previous notice. It is prohibited
to copy or spread any parts of this document in any way without prior written allowance. All rights re-
served.
The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this
operating manual, nor in the diagrams and figures shown.
Even though, the WilTec Wildanger Technik GmbH has undergone biggest possible efforts to ensure
that the operating manual is complete, faultless, and up to date, mistakes cannot be entirely avoided.
If you should find a mistake or wish to make a suggestion for improvement, we look forward to hearing
from you.
Send an e-mail to:
[email protected]
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in various languages can be found in our online shop via:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler
Germany
To return orders for exchange, repair, or other purposes, please use the following address. Attention!
To allow for a smooth execution of your complaint or return, it is important to contact our customer
service team before returning the goods.
Returns Department
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
E-mail: [e-mail]
Tel: [phone]
Fax: [phone]

https://www.XPOtool.com Item 62641 Page 3
The Tool Experts
05 2022-1
Introduction
Thank you very much for purchasing this quality product. To minimise the risk of injury, we ask you to
comply with a few basic safety precautions when using this product. Please read this operating manual
thoroughly and ensure that you have understood it. Keep the operating manual safely for future refer-
ence.
Safety instructions
•The device is only meant to be used in the household. It is not suitable for commercial or indus-
trial purposes.
•The device is not suitable for:
ocleaning water-sensitive floors, such as unsealed cork floors – Danger of damaging
the floors!
ovacuum cleaning sharp, pointy or bigger objects (shards, pebbles, etc.)
odo not use near explosive or easily flammable liquids – Danger of fire and explosion!
ocleaning carpets and carpet floors
•Never fill solvents, liquids containing solvents, or undiluted acids in the water tank.
•Only use the device with original spare parts, otherwise the device will be damaged and the
safety of the device affected.
•Only use the device as described in this operating manual. Any other use is considered as
improper.
•Do not use the device if it has dropped or been damaged otherwise. Only have the device
maintained or repaired by a qualified technician. Repair work carried out by unqualified people
can lead to injury or serious faults.
•Never immerse the device into water or other liquids.
•The device must always be switched off and disconnected from the mains supply before clean-
ing and maintaining it.
•Do not alter the device if it is still attached to the mains adapter/to the mains electricity supply.
•This device can be operated by children older than 8 years of age as well as people with limited
physical, sensory, or mental abilities or with lack of knowledge and experience if they are su-
pervised or have been informed about the safe use of the device and the dangers resulting from
it.
•Children are not allowed to play with the device.
•Children are not allowed to clean or maintain the device without being supervised.
•Keep the device and its electricity cable out of reach of children and animals.
•Keep sufficient distance to heating sources (e.g., cooker plates or ovens) as well as to open
fires to avoid damages to the device.
•Do not use the device in rooms where there are substances easy to ignite or toxic as well as
explosive vapours.
•Do not touch the device, electricity cable, and plug with wet hands.
•Keep body parts and clothing away of moving parts and openings of the device in operation.
Otherwise, these can be drawn in and cause injuries.
•Do not place any items into the openings of the device. Do not use the device if an opening is
blocked. Remove blockages of dust, lint, hair, etc., as these can reduce the suction power.
•When cleaning stairs, be especially careful!
•Switch the device off before changing equipment.
•Check the device for damage before every use. Do not use a damaged device.
•Fill the fresh water tank only with max. lukewarm water. Do not use any hot or boiling water.
Danger of burns!
•Do not fill in any acetic acid, descaling gent, essential oils, or similar into the fresh water tank
nor vacuum clean any.
•Protect the device from rain and store it in a dry place.
•Do not lift the mounted device upright by its handle. There is a danger of material damage.
•The multi-functional cleaner must only be connected to a socket with an according earthing.

https://www.XPOtool.com Item 62641 Page 4
The Tool Experts
05 2022-1
•The multi-functional cleaner is designed for use with a single-phase alternating-current of 230 V,
50 Hz and is protective insulated.
•Check if the existing mains voltage matches the stated voltage rating on the type label of the
device.
•The exchange of the connection cable or plug is only allowed to be carried out by a qualified
technician.
•Ensure that there is no water near electric parts of the multi-functional vacuum cleaner and there
is no water near people in the working area.
•In connection with the vacuumed air, explosive vapours and mixtures can form.
•Never vacuum clean the following substances:
odusts (reactive dusts), flammable or explosive liquids, and gases;
oin connection with acidic cleaning detergents and strong alkaline, reactive dusts, e.g.,
aluminium, zinc, magnesium, etc.;
ostrong acids and leaches if undiluted;
oorganic solvents, e.g., acetone, methanol, ethanol, petrol, etc.
Should you have questions regarding the use in combination with various materials, contact a qualified
professional for help.
Please note that dusts, materials with led-based varnish, minerals, metals, and some woods can be
harmful to your health. Inhaling and touching these can cause allergic reactions, irritations, or respiratory
diseases. We recommend a cautious handling and wearing the according protective gear. Inform your-
self thoroughly beforehand when processing wood, as certain dusts, e.g., oak or beech tree dusts, are
cancerous. Additives for wood processing, e.g., preservatives or chromate, together with dust are par-
ticularly problematic.
Due to the integrated filter bag and three-step HEPA filter system, the professional removal of dust is
no problem. The well-designed wheels of the cleaner enable an easy movement of the system, and the
extensive equipment makes the work for various areas easy. When using the cleaner for dry aspiration,
the first filter step catches coarse dirt in the dust bag, the second filter step is the water tank, the dust is
collected in the water. The third filter step is the HEPA filter, which removes the fine dust.
Replace the HEPA filter with a foam filter for wet vacuum cleaning.
Technical specifications
Power supply
220 V, 50 Hz
Power consumption (W)
1600
Suction power negative pressure (kPa)
approx. 18
Content of delivery
Name
Amount
Wet and dry vacuum cleaner
1
Hose
1
Telescopic bar
1
Floor brush
1
Round brush
1
Crevice nozzle
1
Operating manual
1

https://www.XPOtool.com Item 62641 Page 5
The Tool Experts
05 2022-1
Main components
№
Name
№
Name
1
Floor brush
8
Front intake
2
Telescopic bar
9
Push handle
3
Hose connection
10
Cable
4
Hose
11
Closing clip
5
Upper intake
12
Tank
6
Handle
13
Crevice nozzle
7
Switch
14
Round brush
Notes
The wet and dry cleaner has a double intake system, which enables the use
in various areas. The upper intake (fig. A) is designed for the use as a wet
cleaner or for the automatic vacuum cleaning.
The front intake (fig. B) is for the use as a wet cleaner. The connection not
used must be closed off with a cap.