SciCan DrainHub Series User manual

The Ultimate Drain-Space Saver.
Every plumber and service tech knows the frustration: appliances
like sterilizers, instrument washers, water purification systems,
and more all require drain connections—and it’s easy to run out
of space fast.
Thankfully, now there’s the DrainHub multi-port drain adapter.
This patent-pending device accepts up to eight drain connections
in one small hub—saving space, cost and time!
DrainHub is easy to install, and its 1/2” NPT threaded ports
accept a variety of push-to-connect, compression, and hose
barb adapter fittings.
Materials & Dimensions
• Schedule 40 PVC
• 1/2” NPT threaded inputs (2, 4 or 8)
• Top & bottom slip hubs accept 1-1/2” pipe
• Bottom hub O.D. glues into 2” coupling
Codes & Standards Compliance
• ASTM D2665 (PVC)
• ASTM F1498 (Threads)
• ASME A112.18.2-2015
• FDA Title 21 Material
Multi-Port Drain Adapter
1/2” NPT Inputs
1-1/2” Hub
1-1/2” Hub
4”
4”
Outlet
Connection Fitting Part #
VistaPure 1 x S4730
VistaBrite 1 x S4730
VistaCool Single (V7501) 1 x S4730 & 1 x S8218 (straight) or S8318 (elbow)
VistaCool Double (V7502) 2 x S4730 & 1 x S8218 (straight) or S8318 (elbow)
Bravo 1 x S8214 (straight) or S8314 (elbow)
Hydrim L110, C61 1 x S8222 (straight) or S8322 (elbow)
StatClean 1 x S8218 (straight) or S8318 (elbow)
- Plug (1/2” NPT) S8015
Required Fittings
4 HOLE: DH154
8 HOLE: DH158
DH154
DH158

A variety of compatible 1/2” NPT threaded push-to-connect,
compression, and hose barb adapter drain fittings are available. Important: Always install a 1/2” NPT threaded plug in any
unused port(s) of the DrainHub, and always follow applicable
local plumbing codes.
scican.com
SciCan
@SciCan SciCanTV
scican.com
Distributed by:
Phone [phone]
VistaResearchGroup.com
Vista Research Group
PO Box 321
Ashland, Ohio 44805-0321
USA
Manufactured by:
SciCan Inc.
701 Technology Dr.,
Canonsburg, PA 15317
USA
Tel: [phone]
Toll Free: 1-800-572-1211
Fax: [phone]
SD-514 US EN R1. DrainHub is a trademark of Vista Research Group, Ashland, OH. Your Infection Control Specialist is a trademark of SciCan Ltd.
Installation beside the main drain line
can offer maximum flexibility and can be
achieved with the use of a simple drain
tee adapter fitting.
When possible, as in cases of new
construction, it can be beneficial to
run parallel drain waste systems to
separate waste from the sink from other
appliances and devices.
When necessary, it is possible to install
the DrainHub fitting directly in the main
drain line under a sink. However, this
position can result in more audibly
noticeable drainage of waste containing
a significant amount of air.
DrainHub Position Under Sinks
Method A Method B Method C
The top and bottom hubs of the DrainHub fitting are designed to accommodate standard 1-1/2” PVC pipe or standard 1-1/2” trap
adapters for use with 1-1/2” or 1-1/4” tubular waste lines.
Connection to Waste Lines
1-1/2” Pipe Fits Inside Hubs Outlet Hub Fits Into 2” Coupling
for 2” Discharge Port
Can Be Connected with
Trap Adapters
Capped
or Vent
Capped
or Vent