
This Kit Includes
2 LIGHT ASSEMBLIES W/HARDWARE
2 BLACK POWER CABLES
2 STAINLESS STEEL ARMS
1 UNDER WATER TRANSFORMER
POWER SUPPLY CORD
Tools Needed
PHILLIPS STYLE SCREW DRIVER
TWO 1/2" WRENCHES (OR PLIERS)
Assembly Instructions
1.Tobegin,placethelight,lensdown,onaatsurface.Slidethe2bluenutsintotheslotsonthesideofthelight.
2. Next,looselytthe2blueknobsintothenuts.
3.Now,slidetheplasticbracketontotheknobsandtightentheknobs.Adjusttheangleofthelightupwardstoyour
desiredpreference.
4.Attachthebottomoftheplasticbrackettotheroundendofthestainlesssteelarm.Besuretoorientthearmas
showninthediagrambelow.Placeawasherontopoftheplasticbracket,andbelowthesteelarmandslidingthe
1"x5/16"boltdownthroughthetopandsecuringitwitha5/16"locknut.Thelightcanbepositionedalongthearm
bylooseningthelocknut,slidingthelighttothedesiredposition,thenre-tighteningthenut.
5.Continuebyattachingthesteelarmtothewaterfeature.Removeoneofthetwo2"boltsattachingtheoattoyour
Scottwaterfeatureandaligntheholeswiththestainlesssteelarm.Reinserttheboltwithwasher,outwardthroughthe
housing,oatandstainlesssteelarm.Securewithwasherandnut.
6. Finally,removetheplasticclipfromtheendoftheblackpowercable.Attach rubber gasketandplugitintothebackof
thelightandsecuretightlywiththeincludedscrews.Removetheportcoverfromtheunderwatertransformerbyremoving
the2screws,andtransfertherubbergasketfromtheportcovertotheplugend.Leaveanyunusedportssecurely
coveredtomaintainawater-tightseal.Secureplugtightlywiththeincludedscrewstomaintainawater-tightseal.
7.Repeatsteps1through6forsecondlightassembly.
Always use a GFCI
Always disconnect the power
when swimmers are present
!
UNDER WATER
TRANSFORMER
PLASTIC
BRACKET
STAINLESS
STEEL ARM
BLACK
POWER
CABLE
BLACK
POWER
CABLE
2" BOLT
HOUSING
FLOAT
LED Light Kit
For2Lights
RUBBER
GASKET
RUBBER
GASKET