Scott SDM60 User manual

- 10 TRACK BUTTON
VOLUME - BUTTON VOLUME + BUTTON
TIMER/SLEEP BUTTON
POWER STANDBY BUTTON
PLAY/PAUSE BUTTON
F - SKIP / UP BUTTON
+ 10 TRACK BUTTON
MONO/ST./PLAY MODE BUTTTON
PRESET EQ BUTTON
FUNCTION BUTTON
STOP/BAND/CLEAR BUTTON
B - SKIP / DOWN BUTTON
MUTE BUTTON
REMOTE CONTROL UNIT
ID3/DISPLAY BUTTON
CLOCK-ADJ./MEMORY BUTTON
GB
PORTABLE MP3/USB BOOM BOX
Instruction Manual
SDM60
CONTROLS
14. STANDBY BUTTON
15. OPEN/CLOSE BUTTON
16. FUNCTION BUTTON
17. PRESET EQ BUTTON
18. VOLUME CONTROL +
19. VOLUME CONTROL -
20. SPEAKER
21. CD DOOR
22. USB PORT
23. TELESCOPIC ANTENNA
24. BATTERY COMPARTMENT
25. PHONES JACK
26. AC SOCKET
27. AUX IN JACK
1. STOP /BAND/CLEAR BUTTON
2. ID 3/DISPLAY BUTTON
3. B-SKIP/DOWN BUTTON
4. REMOTE SENSOR INDICATOR
5. CARRYING HANDLE
6. LCD DISPLAY
7. MONO/STEREO/PLAY MODE BUTTON
8. CD PLAY / PAUSE
9. F-SKIP / UP BUTTON
10. MEMORY/CLOCK ADJ. BUTTON
11. STANDBY INDICATOR
12. M-UP/FOLDER UP BUTTON
13. TIMER/SLEEP BUTTON
MEMORY DN/UP BUTTON/
FOLDER DN/UP BUTTON

WARNING
CLASS 1 LASER PRODUCT
This product contains a low power laser device.
CLASS 1 LASER PRODUCT
APPAREIL Á LASER DE CLASSE 1
PRODUCTO LASER DE CLASE 1
CAUTION
INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS
DEFEATED.
AVOID EXPOSURE TO BEAM
PRECAUTIONS
Follow the advice below for safe and appropriate operations.
ON PLACEMENT
• Do not use the unit in places which are extremely hot, cold, dusty, or humid.
• Placetheunitonaatandevensurface.
• Donotrestricttheairowoftheunitbyplacingitinaplacewithpoorairow,bycoveringitwithacloth, 
 orbyplacingitonacarpet.
ON SAFETY
• WhenconnectinganddisconnectingtheACcord,griptheplugandnotthecorditself.Pullingthecordmaydamage
it and create hazard.
• Whenyouarenotgoingtousetheunitforalongperiodoftime,disconnecttheACpowercord.
ON AC VOLTAGE
• Beforeuse,checkthattheratedvoltageofyourunitmatchesyourlocalvoltage.
ON CONDENSATION
• When left in a heated room where it is warm and damp, water droplets or condensation may form inside the CD player.
• When there is condensation inside the unit, the unit may not function normally.
• Letitstandfor1to2hoursbeforeturningthepoweron,orgraduallyheattheroomupanddrytheunitbeforeuse.
* Ensureaminimumdistanceof5cmaroundtheapparatusforsufcientventilation.
* Ensurethattheventilationisnotimpededbycoveringtheventilationopeningswithitems,suchasnewspapers,
table-cloths, curtains, etc..
* Donotplacenakedamesources,suchaslightedcandlesontheapparatus.
* Take attention to the environmental aspects of battery disposal.
* Use the apparatus only in moderate climates (not in tropical climates).
* Donotexposetheapparatustodrippingorsplashing.
* Donotplaceobjectslledwithliquids,suchasvases,ontheapparatus.
• Mainsplugisusedasthedisconnectdevice.Itshallremainreadilyoperableandshouldnotbeobstructedduring
 intendeduse.Tobecompletelydisconnectedtheapparatusfromsupplymains,themainsplugoftheapparatusshall
be disconnected from the mains socket outlet completely.
Should any trouble occur, disconnect the AC power cord and refer servicing to qualied personnel.
Warning: Do not touch the lens.
DO NOT THROW BATTERIES IN FIRE !
ATTENTION : To reduce the risk
of electric shock, do not remove the
cover. There are no user serviceable
partsinsidetheunit.Referallservicing
toqualiedpersonnel.
The exclamation point within
thetriangleisawarningsign
alertingtheuserofimportant
instructions accompanying
the product.
The lightening flash with
arrowhead symbol within the
triangle is a warning sign
alertingtheuserof"danger-
ousvoltage"insidetheunit.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
In case of misfunction due to electrostatic discharge the apparatus has to be reset by disconnecting it from
mains supply.
THE MARKING PLATE IS LOCATED AT THE BACK OF ENCLOSURE OF THE APPARATUS.

GB 2
USING HOUSE CURRENT
Before use, check that the rated voltage of your unit matches your
localvoltage.
USING BATTERIES
Disconnect theAC power cord from theAC inlet of the unit. Battery power
is cut automatically by the cord while it is connected.
To AC outlet
When the volume decrease, or the sound distorts, replace all of
the batteries with new ones.
battery door
POWER SUPPLY
To AC socket
Insert batteries:
8 x 1.5 V (UM-2 or "C" size)
Press VOLUME +/- to adjust volume level. Volume level is shown on the display.
FOR PRIVATE LISTENING
Pluginheadphones(ø3.5mmstereomini-plug)tothePHONESjack.
Whenheadphonesarepluggedin,thespeakersareautomaticallydisconnected.
TO ADJUST THE VOLUME
ADJUSTING THE SOUND
PRE-SET EQ
Preset EQ : FLAT, JAZZ, ROCK, CLASSIC, POP.
Press PRESET EQUALIZER button to select your preferred
sound, preset mode is shown on the display.
1. Powerison/offbypressingSTANDBYbutton.
2. Thefunctionischangedcyclically
 bypushingFUNCTIONbutton:
CD USB TUNER AUX .
POWER ON/OFF AND FUNCTION CHANGE
STANDBY
VOL. +
VOL. -
PRESET EQ
The mute on/ off is changed cyclically by pressing MUTE
button.
The“mute”markisonduringmuteison.
The mute on is cancelled in case as shown below.
a. The power is off/on
b. The Volume is adjusted by the VOL +/- button.
MUTE ON/OFF
MUTE
AUX IN
Connect an external LINE OUT to AUX. IN socket at the back of the unit.
Press the FUNCTION button and select AUX mode.
( AUX IN CABLE NOT INCLUDED )
(Plugotherendinto
external source )

3. TurninastationbypressingtheUP/DOWN
button.
5 . The FM stereo indicator (Stereo) will appear on
the LCD display panel when an FM Stereo
Broadcast is received.
1 . Press the FUNCTION button and select Radio
mode.
2. SelectAMorFMbypressingthe
STOP/BAND/CLEAR button.
4. Releasethebuttonassoonasthefrequencystarts
 tochange.Thetunerwillsearchupordownthe
selected band and stop at the next receivable
 station.Whenscanningstops,thefrequencyof
the received station will be displayed.
LISTENING TO THE RADIO
GB 3
1. The clock is displayed on CD display at power off condition.
2. PresstheMEMORYCLOCK-ADJ.button,hourofclockash.
3. Press the F-SKIP/UP or B-SKIP/DOWN to
 adjusthourdigit.
4. PresstheMEMORYCLOCK-ADJ.button,theminutedigitash.
5. Press the F-SKIP/UP or B-SKIP/DOWN to adjust
 minutedigit.
6. PresstheMEMORYCLOCK-ADJ.buttonagain,
the correct time is shown on display.
CLOCk ADJUSTMENT
MEMORY/CLOCK-ADJ.
Maximum 20 preset stations can be memorized, each in FM and AM.
1. Pressthe"F-SKIP/UPorB-SKIP/DOWN"buttonto
 selectedthedesiredfrequency.
2. Pressthe"MEMORY"button.
3. Pressthe"M-UP/FOLDERUP"onradiooronremotecontroltoselect
the memory number.
4. Pressthe"MEMORY"buttonagaintoconrmtheselection.
5. Pressthe"M-UP/FOLDERUP"buttontoreadthedesiredfrequency.
RADIO MEMORY FUNCTION
MEMORY / CLOCK-ADJ.
FOR BETTER RECEPTION
FM AM
AM : Rotate the unit from side to side.
FM:Extendandchangepositionoftheantenna.
After Listening: Press the STANDBY button off.

CD display
5. Press the PLAY/PAUSE button.
 Tracknumber"1"&thesymbol""willbe
 shownduringnormalcompactdiscplayback.
 Tracknumber"001",thesymbol""&"MP3"
 willbeshownduringMP3playback.
 Tracknumber"001",thesymbol""&"WMA"
 willbeshownduringWMAplayback.
 Tracknumber"001",thesymbol""&"USB"
 willbeshownduringUSBplayback.
GB 4
MP3 display
WMA display
COMPACT DISC PLAYBACk
1 . Press the FUNCTION button and select CD
mode.
2 . Press OPEN/CLOSE button to open CD door.
3. Insertadiscwiththelabelsidefacingup.
4 . Press OPEN/CLOSE button to close the CD door.
For CD: Total number of tracks and time will be
shown on the display.
For MP3: Total number of folder and tracks will be
shown on the display.
For WMA: Total number of folder and tracks will be
shown on the display.
For USB: Total number of folder and tracks will be
shown on the display.
CD display
CD display
USB display
TO SkIP TO THE BEGINNING OF A TRACk
• Presseitheroneoftheskipbuttonsaccordingtothedesiredskipdirection.
• Play/back resumes from the selected track.
• Whenthebuttonispressedonceduringplay,theprevioustrackstartsagain.
• Whenthebuttonispressedonceduringplay,thenexttrackplays.
SEARCHING FOR A PASSAGE WITHIN A TRACk
• Keeptheorbuttonpressedduringplayback,
 andreleasethebuttonassoonasyourecognisethedesiredpassage.
Then normal CD playback will resume from this point.
TO INTERRUPT PLAYBACk
Press the PLAY/PAUSE button and the symbolPLAY/PAUSE button and the symbolbutton and the symbol
""andcurrenttimewillash.Pressthebuttonagain
to resume playback.
TO STOP PLAYBACk
Press the STOP/BAND/CLEAR button.
For CD: Total number of track and time will be
shown.
For MP3: Total number of folder and track will be
shown.
For WMA: Total number of folder and track will be
shown.
For USB: Total number of folder and track will be
shown.
CD display
MP3 display
WMA display
USB display

GB 5
FOR NORMAL COMPACT DISC PLAYBACk
ModesequenceREPEAT>>REPEATALL
>>RANDOM>>REPEATOFF.
DuringRepeat1mode,
display shows
DuringRepeat2mode,
display shows
DuringMixmode,
display shows
REPEAT , REPEAT FOLDER AND MIX PLAYBACk
CD display
FOR MP3/WMA/USB PLAYBACk
Mode sequence REPEAT >> REPEAT FOLDER >>
REPEATALL>>RANDOM>>REPEATOFF.
DuringRepeat1mode,
display shows
DuringRepeat2mode,
display shows
DuringRepeat3mode,
display shows
DuringMixmode,
display shows
PressPLAYMODEbuttonduringstopmode.CDplayswithasingletrackrepeat,alltracksrepeatorrandomly.
MP3/WMA/USB display
Note on CD-R/RW discs
- Becauseofnon-standardizedformatdenition/
 productionofCD-R/RW,playbackqualityandperformancearenotguaranteed.
- ManufacturerisnotresponsiblefortheplayabilityofCD-R/RWduetorecordingconditions,suchasPCperformance,
 writingsoftware,mediaability,etc.
- Do not attach a seal or label to either side of the CD-R/RW disc. It may cause a malfunction.
- ItisrecommendedtorecordonlyaudiolesonCD-R/RWdiscsforeasyreading.
- Press FOLDER UP/DOWN to select desired folder.
- PressUP/DOWNtoselectdesiredsongs.
- PressPLAY/PAUSEbuttontostartplaying.Theword“MP3/WMA/USB”
will show on display.
Press FOLDER UP/DOWN to select desired folder. Press UP/DOWN to select the desire track.
The operations of buttons of PLAY/PAUSE, UP/DOWN and STOP/BAND/CLEAR are the same as
CD disc.
FOLDER UP / DOWN
USB display
1. Connect USB disk or MP3 player into the USB port.
2. Press the FUNCTION button and select USB mode.
3. Press PLAY/PAUSE button to start playback.
note: USB connector does not support connection with USB extension cable and
 itisnotdesignedforcommunicationwithcomputerdirectly.
Manufacturer is not responsible for the playability of USB disk or MP3 player
 duetorecordingcondition,capacity,interfacecompatibility,etc.
Duetodifferentformats,someUSBdisksorMP3playersmaytakelongertimetoberead.
USB OPERATION
Duringplayback,press10+or10-buttontoselectthenextorprevious10tracks.
+10 / -10 BUTTON

1. If you want to fall asleep to music, press and hold SLEEP button.
2. You may adjust the radio or CD player's sleep function to play
 from90,80,70upto10minutesofmusicbeforeshutting
itself off automatically.
TO SET SLEEP FUNCTION
GB 6
CD display
PROGRAM PLAYBACk
FOR NORMAL COMPACT DISC PLAYBACk
Programmedplaybackenablestracksonadisctobeplayedinthedesiredorder.
Upto60trackscanbeprogrammed.
1. Press the “ MEMORY “ button.
2. Press the skip buttons to select the desired track number.
3. Press“MEMORY“buttonagaintomemorizethetrack.
4. Repeatsteps2and3untilalldesiredtracksareprogrammed.
5. Press the “ PLAY/PAUSE “ button to start. “ MEMORY “ is shown on the CD display.
6. Press“STOP“buttontostopprogrammedplayback.
7. Press “ MEMORY “ and “ PLAY/PAUSE “ buttons to resume
 programmedplayback.
8. Press"STOP/BAND/CLEAR"buttontocleartheprogrammedmemory.
FOR MP3/WMA/USB PLAYBACk
Programmedplaybackenablesfolders/albumsortracksonadisctobeplayedinthedesired
order.Upto60folders/albumsortrackscanbeprogrammed.
1. Press the “ MEMORY “ button.
2. Press the M-UP/FOLDER UP button to select the desired folder.
3. Press“MEMORY“buttonagaintomemorizethefolder.
4. Press the skip buttons to select the desired track number.
5. Press“MEMORY“buttonagaintomemorizethetrack.
6. Repeatsteps2and5untilalldesiredtracksareprogrammed.
7. Press the “ PLAY/PAUSE “ button to start. “ MEMORY “ is shown on the CD display.
8. Press“STOP“buttontostopprogrammedplayback.
9. Press“MEMORY“and“PLAY/PAUSE“buttonstoresumeprogrammedplayback.
10. Press"STOP/BAND/CLEAR"buttontocleartheprogrammedmemory.
Note :Programmingcanonlybemadewhentheplayerisinstopmode.
CD display
MP3/WMA/USB display
90 80 70 60 50 40 30 20 10 90
ID 3 DISPLAY
- Songname,Singernameandalbumnamecanbedisplayedcyclically 
 bypressingID3buttonduringplayingMP3.
- Title-songnameArtist-singernameAlbum-Albumname
- PressID3againtocancelID3display.
TIMER SETTING
1. Press the STANDBY button to put the machine in the standby mode.
2. Pressandholdthe"TIMER/SLEEP"button,"ONTIME"willdisplay,"TIMER"
 andthehourdigitsash.Presstheskipbuttonstosetthehour.
 Pressthe"TIMER/SLEEP"buttontoconrm,theminutesdigitsash,press
 theskipbuttonstosettheminutes.Pressthe"TIMER/SLEEP"
 buttontoconrmand"OFFTIME"willdisplay.Followsameprocedureofsetting
"ONTIME"tosetthe"OFFTIME".
3. Aftersettingthe"OFFTIME",youcanalsoselecttheFUNCTION(CD,USB,TUNER,
AUX)forTIMERbypressing.Pressthe"TIMER/SLEEP"toconrm.
4. Then, press skip buttons to select the volume of the sound,
 pressthe"TIMER/SLEEP"toconrm.

GB 7
CD SECTION
Channels: 2 channels
S / N ratio: 60 dB
Wow&Flutter: undetectable
Samplingfrequency: 44.1kHz8xoversampling
Quantization: 16 bits DA converter
Pickuplightsource: Semi-conductorlaser
Pickupwavelength 790nm
RADIO SECTION
Tuningranges: FM87.5-108MHz
AM 522 - 1620 kHz
Antennas: AM Built - in ferrite bar
FM Rod antenna
GENERAL
Output power: 2 W + 2 W
Power consumption: 13 WATTS
Speaker: 4"8OHM
Phones jack: 3.5MM
Power source: AC : 230V ~ 50Hz
 DC:12V8x1.5V(UM2/"C"SIZE)
Dimensions: 420 (L) x 238 (D) x 174 (H)mm
Weight 3.15Kgs
Duetocontinuingimprovement,thefeaturesandthedesignaresubjecttochangewithoutnotice.
Where to place the item :
Today’sfurnitureiscoatedwithawidevarietyoflacquersandsynthetic-coatingsthataretreatedwithanextensiverange
ofcleaningproducts.Therefore,thepossibilitythatsomeofthesesubstancescontaincomponentsthatreactadverselyto
the rubber feet of the item and soften them, cannot be completely excluded. The rubber feet of the appliance can cause
discoloringtofurnituresurfaces.Ifnecessary,placetheapplianceonanon-slidesurface.
If at any time in the future you should need to dispose of this product please note that Waste
electrical products should not be disposed of with household waste.Please recycle where
facilitiesexist.CheckwithyourLocalAuthorityorretailerforrecyclingadvice.(Waste
ElectricalandElectronicEquipmentDirective)
SPECIFICATIONS
CLEANING CD
If the CD skips or will not play , the disc may
needcleaning.Beforeplaying,wipethedisc
fromthecentreoutwithacleaningcloth.After
playing,storethediscinitscase.
MAINTENANCE
CLEANING THE UNIT
Donotusevolatilechemicalsonthisunit.Cleanbylightlywipingwith
a soft cloth.
IMPORTANT NOTE
Ifanabnormaldisplayindicationoranoperatingproblemoccurs,discon-
nect theAC power cord and remove the batteries. Wait at least 5 seconds,
then reconnect the AC power cord or reinstall the batteries.
WARNING
ShouldtheCDdoorbeopenedbeforethereadingoftheCDcompleted,a
jammingnoisemayoccur.ThisisresolvedbyclosingtheCDdoor.