ScubaJet SJ 200 User manual

1
USER MANUAL
ENGLISH VERSION

2
CONTENTS
1. Introduction 3
2. Starting up - SCUBAJET in use 4
2.1. INTRODUCTION 4
2.2. Charging SCUBAJET 5
2.3. Setting up the SCUBAJET with the 400 wh battery 7
3. Partsdiagramandtechnicalspecications 9
3.1. Scope of delivery dive package 9
3.2. Scope of delivery SUP package 10
3.3. Technicalspecications 11
4. Using SCUBAJET while snorkeling, swimming and diving 13
4.1. The function ring on the motor unit 16
5. Using the SCUBAJET on your SUP 17
5.1. Remote control 20
6. After using SCUBAJET 25
7. Battery use & care information 27
7.1. Battery use 28
7.2. Charging batteries 28
7.3. Storing batteries 29
7.4. Buying batteries 29
8. Important safety & operating information 30
8.1. Danger warning for risk of injury to yourself or others 30
8.2. Warning about the risk of damage to or by your SCUBAJET 34
9. Warrantyterms 35
9.1. Warranty process 36
10. Transportation of the SCUBAJET 38
10.1.Preparing the battery for transportation via airplane 39

3
1. INTRODUCTION
Dear customer,
Thank you so much for choosing SCUBAJET. Our goal is to make water sports activities more awesome.
SCUBAJET is the most versatile and easy to handle water jet for paddle boarding, canoeing, diving,
snorkeling and swimming, and it turns almost any existing water sports equipment into a powerful
electric jet-assisted product within seconds.
Ourproductsaremadetothehighestspecicationswhenitcomestotechnologyanddesign,featuring
cutting-edge engines, innovational battery systems, and exceptional water jet propulsion technology.
Every SCUBAJET has been tested extensively before leaving our headquarter.
We want to make sure you stay safe while using your SCUBAJET, so we created this manual with a lot of
care. Now it’s up to you, to read it carefully, so you may use your SCUBAJET properly and enjoy it for a
long time.
Our main concern is safety, and a great user-friendly experience. If you have any comments or issues
with the design or use of our products, please don’t hesitate to contact our SCUBAJET Customer Service
via [email protected].
We wish you a lot of fun with your SCUBAJET products.
All the best
SCUBAJET Founder Armin and the SCUBAJET Team
ELECTRICALLY OPERATED
PRODUCT&WATERSUCTIONEFFECT
Not recommended for children under 16 years of age. As with all electrical products, precautions should
be observed during handling and used to reduce the risk of electric shock. In addition, water suction at
the water intake may suck in hair, body parts or loose items.
 DANGER

4
2. STARTING UP -
SCUBAJET IN USE
2.1. INTRODUCTION
This section applies to the proper use of the SCUBAJET. Please
follow each of the following steps carefully in order to start your
SCUBAJET properly.
Once the SCUBAJET is set up, go to relevant section with your
activity as follows: For the use while snorkeling, swimming and
diving go to section 4. For the use on a SUP go to section 5.

5
Charging the battery
1 Connect the power cord to the power
supply.
2 Connect the power supply to the charger.
3 Put the battery into the charger and fasten it
with the metal ring.
5 The battery is full when the light appears
green (Charging time for 200 wh = approx. 3
hours; for 400 wh = approx. 6 hours).
6 Overcharging cannot happen. You can keep
the battery in the charger for an unlimited
time.
4 Connect the power cord to the mains.
2.2. CHARGING SCUBAJET

6
Charging the remote control and the repeater for use on SUP
1 Put the remote control and the repeater
into the 2 slots on the charger.
2 Connect the power cord to the mains.
3 Batteries are full when lights are green.

7
2 Slide the battery into the tube (so the end
with the metal ring is on the top) until it
touches the bottom.
3 Rotate the battery clockwise by using the
metal ring until the battery locks in place.
5 Put the nose cap back on the tube, and
close the cap by twisting it clockwise only
by hand.
6 Please mount the right adapter in this last
step. The SCUBAJET is now ready to use.
2.3. SETTING UP THE SCUBAJET WITH
THE 400 WH BATTERY
Insertingthebatteryandxingthetube
The SCUBAJET 200 will be delivered with the tube already mounted.
You may skip this step.
1 When connecting the motor unit with the
tube, take care that the outlet is located on
the left-hand side of the adapter appliance.
This has to be the exact position, otherwise
the device can‘t be turned on.
4 Once the battery is in place, it should be
pressed down until beeping sounds appear
(6x short, 1x long, 1x short). Once the sound
appeared, the battery is connected to the
motor unit.

8
2 In order to remove the battery from the
tube, pull the metal ring and pull out the
battery.
3 Put nose back on, push in slightly, then close
by twisting only by hand.
Remove the battery
1 Use the Nose-tool on order to open the
cap on the front by attaching the tool,
holding it together with the cap and rotating
it counter-clockwise (for early SCUBAJET
versions). If there is no nose-tool to be
found within the packaging, rotate the cap
by hand only.

9
3. PARTS DIAGRAM AND
TECHNICAL SPECIFICATIONS
3.1. SCOPE OF DELIVERY DIVE PACKAGE
If you decided to order a dive package, you control the SCUBAJET directly via
the 3 speed steps on the function ring. YOUDON‘TNEEDAREMOTECONTROLORREPEATER.
Tube with
adapter rail
(short or long version)
Nose
(with or without
LED lamp)
Nozzle
E-Motor
FunctionRing
Impeller
Waterintake
(Grille)
NoseOpeningTool
(only available with earlier versions.
Current batches do not require a
nose opening tool.)
Battery
(with metal ring)
Charger
(with power supply)
Northern America, Central America and
parts of Japan - 110 Volt
Other countries 220 Volt
Charger
Dive Adapter

10
3.2. SCOPE OF DELIVERY SUP PACKAGE
In order to actuate your SCUBAJET and adjust the speed on a SUP board, you need the remote control.
The positions *, ** and *** on the function ring do not apply when using the SCUBAJET SUP Package.
Please choose the remote sign on the function ring instead.
Tube with
adapter rail
(short or long version)
Nose
(with or without
LED lamp)
Nozzle
E-Motor
FunctionRing
Impeller
Waterintake
(Grille)
NoseOpeningTool
(only available with earlier versions.
Current batches do not require a
nose opening tool.)
Battery
(with metal ring)
Remote control +
Repeater
Charger
(with power supply)
Northern America, Central America and
parts of Japan - 110 Volt
Other countries 220 Volt
Charger
USFinboxAdapter
SlideIn Adapter