SCW Sentry Pro User manual

User Manual!
Network PTZ Series!
!
Sentry Pro, Sentinel Pro &!
The Tracker

UserManualofIRNetworkSpeedDome

1
Thankyouforpurchasingourproduct.Ifthereareanyquestions,orrequests,please
donothesitatetocontactthedealer.
ThismanualappliestoIRNetworkSpeedDome.
Thismanualmaycontainseveraltechnicalorprintingerrors,andthecontentis
subjecttochangewithoutnotice.Theupdateswillbeaddedtothenewversionof
thismanual.Wewillreadilyimproveorupdatetheproductsorproceduresdescribed
inthemanual.
DISCLAIMERSTATEMENT
“UnderwritersLaboratoriesInc.(“UL”)hasnottestedtheperformanceorreliability
ofthesecurityorsignalingaspectsofthisproduct.ULhasonlytestedforfire,shock
orcasualtyhazardsasoutlinedinUL’sStandard(s)forSafety,UL609501.UL
Certificationdoesnotcovertheperformanceorreliabilityofthesecurityorsignaling
aspectsofthisproduct.ULMAKESNOREPRESENTATIONS,WARRANTIESOR
CERTIFICATIONSWHATSOEVERREGARDINGTHEPERFORMANCEORRELIABILITYOF
ANYSECURITYORSIGNALINGRELATEDFUNCTIONSOFTHISPRODUCT.”


















UserManualofIRNetworkSpeedDome2
RegulatoryInformation
FCCInformation
FCCcompliance:Thisequipmenthasbeentestedandfoundtocomplywiththelimits
foradigitaldevice,pursuanttopart15oftheFCCRules.Theselimitsaredesignedto
providereasonableprotectionagainstharmfulinterferencewhentheequipmentis
operatedinacommercialenvironment.Thisequipmentgenerates,uses,andcan
radiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththe
instructionmanual,maycauseharmfulinterferencetoradiocommunications.
Operationofthisequipmentinaresidentialareaislikelytocauseharmful
interferenceinwhichcasetheuserwillberequiredtocorrecttheinterferenceathis
ownexpense.
FCCConditions
Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothe
followingtwoconditions:
1.Thisdevicemaynotcauseharmfulinterference.
2.Thisdevicemustacceptanyinterferencereceived,includinginterferencethatmay
causeundesiredoperation.
EUConformityStatement

Thisproductandifapplicablethesuppliedaccessoriestooare
markedwith"CE"andcomplythereforewiththeapplicable
harmonizedEuropeanstandardslistedundertheLowVoltageDirective
2006/95/EC,theEMCDirective2004/108/EC,theRoHSDirective
2011/65/EU.


2012/19/EU(WEEEdirective):Productsmarkedwiththissymbol
cannotbedisposedofasunsortedmunicipalwasteintheEuropean
Union.Forproperrecycling,returnthisproducttoyourlocalsupplier
uponthepurchaseofequivalentnewequipment,ordisposeofitat
designatedcollectionpoints.Formoreinformationsee:www.recyclethis.info.

2006/66/EC(batterydirective):Thisproductcontainsabatterythat
cannotbedisposedofasunsortedmunicipalwasteintheEuropean
Union.Seetheproductdocumentationforspecificbatteryinformation.
Thebatteryismarkedwiththissymbol,whichmayincludeletteringto
indicatecadmium(Cd),lead(Pb),ormercury(Hg).Forproperrecycling,returnthe
batterytoyoursupplierortoadesignatedcollectionpoint.Formoreinformationsee:
www.recyclethis.info.



UserManualofIRNetworkSpeedDome3
SafetyInstruction
Theseinstructionsareintendedtoensurethattheusercanusetheproductcorrectly
toavoiddangerorpropertyloss.
Theprecautionmeasureisdividedinto‘Warnings’and‘Cautions’:
Warnings:Seriousinjuryordeathmaybecausedifanyofthesewarningsare
neglected.
Cautions:Injuryorequipmentdamagemaybecausedifanyofthesecautionsare
neglected.
 
WarningsFollowthesesafeguardsto
preventseriousinjuryordeath.
CautionsFollowtheseprecautionsto
preventpotentialinjuryormaterial
damage.
Warnings:
Pleaseadoptthepoweradapterwhichcanmeetthesafetyextralowvoltage
(SELV)standard.Andsourcewith24VAC10%or12VDC10%(dependingon
models)accordingtotheIEC609501andLimitedPowerSourcestandard.The
powerconsumptioncannotbelessthantherequiredvalue.
Donotconnectseveraldevicestoonepoweradapterasanadapteroverloadmay
causeoverheatingandcanbeafirehazard.
Whentheproductisinstalledonawallorceiling,thedeviceshouldbefirmly
fixed.
Toreducetheriskoffireorelectricalshock,donotexposetheindoorused
producttorainormoisture.
Thisinstallationshouldbemadebyaqualifiedservicepersonandshould
conformtoallthelocalcodes.
Pleaseinstallblackoutsequipmentintothepowersupplycircuitforconvenient
supplyinterruption.
Iftheproductdoesnotworkproperly,pleasecontactyourdealerorthenearest
servicecenter.Neverattempttodisassembletheproductyourself.(Weshallnot
assumeanyresponsibilityforproblemscausedbyunauthorizedrepairor
maintenance.)

UserManualofIRNetworkSpeedDome4
Cautions:
Makesurethepowersupplyvoltageiscorrectbeforeusingtheproduct.
Donotdroptheproductorsubjectittophysicalshock.Donotinstalltheproduct
onvibratorysurfaceorplaces.
Donotexposeittohighelectromagneticradiatingenvironment.
Donotaimthelensatthestronglightsuchassunorincandescentlamp.The
stronglightcancausefataldamagetotheproduct.
Thesensormaybeburnedoutbyalaserbeam,sowhenanylaserequipmentis
beingused,makesurethatthesurfaceofthesensornotbeexposedtothelaser
beam.
Donotplacetheproductinextremelyhot,coldtemperatures(theoperating
temperatureshouldbebetween30°C~65°C),dustyordampenvironment.
Toavoidheataccumulation,goodventilationisrequiredforaproperoperating
environment.
Whileshipping,theproductshouldbepackedinitsoriginalpacking.
Pleaseusetheprovidedglovewhenopenuptheproductcover.Donottouchthe
productcoverwithfingersdirectly,becausetheacidicsweatofthefingersmay
erodethesurfacecoatingoftheproductcover.
Pleaseuseasoftanddryclothwhencleaninsideandoutsidesurfacesofthe
productcover.Donotusealkalinedetergents.


UserManualofIRNetworkSpeedDome5
TableofContents
Chapter1Overview.................................................................................................................7
1.1SystemRequirement................................................................................................................7
1.2Functions.................................................................................................................................7
Chapter2NetworkConnection..............................................................................................10
2.1SettingtheNetworkSpeedDomeovertheLAN....................................................................10
2.1.1WiringovertheLAN..........................................................................................................10
2.1.2DetectingandChangingtheIPAddress.............................................................................11
2.2SettingtheNetworkSpeedDomeovertheWAN..................................................................12
2.2.1StaticIPConnection...........................................................................................................12
2.2.2DynamicIPConnection......................................................................................................13
Chapter3AccesstotheNetworkSpeedDome.......................................................................16
3.1AccessingbyWebBrowsers...................................................................................................16
3.2AccessingbyClientSoftware.................................................................................................18
Chapter4LiveView...............................................................................................................20
4.1LiveViewPage.......................................................................................................................20
4.2StartingLiveView..................................................................................................................21
4.3RecordingandCapturingPicturesManually..........................................................................22
4.4OperatingPTZControl............................................................................................................22
4.4.1PTZControlPanel...............................................................................................................22
4.4.2Setting/CallingaPreset....................................................................................................23
4.4.3Setting/CallingaPatrol.....................................................................................................25
4.4.4Setting/CallingaPattern..................................................................................................27
4.5ConfiguringLiveViewParameters.........................................................................................27
Chapter5PTZConfiguration..................................................................................................28
5.1ScanMode.............................................................................................................................28
5.2ParkAction.............................................................................................................................28
Chapter6SpeedDomeConfiguration.....................................................................................29
6.1ConfiguringLocalParameters................................................................................................29
6.2ConfiguringTimeSettings......................................................................................................30
6.3ConfiguringNetworkSettings................................................................................................33
6.3.1ConfiguringTCP/IPSettings...............................................................................................33
6.3.2ConfiguringPortSettings...................................................................................................34
6.3.3ConfiguringPPPoESettings................................................................................................35
6.3.4ConfiguringDDNSSettings.................................................................................................35
6.3.5ConfiguringSNMPSettings................................................................................................38
6.3.6Configuring802.1XSettings...............................................................................................39
6.3.7ConfiguringQoSSettings...................................................................................................40
6.3.8ConfiguringFTPSettings....................................................................................................41

UserManualofIRNetworkSpeedDome6
6.3.9ConfiguringUPnPSettings.................................................................................................42
6.4ConfiguringVideoandAudioSettings...................................................................................43
6.4.1ConfiguringVideoSettings................................................................................................43
6.4.2ConfiguringAudioSettings................................................................................................44
6.5ConfiguringImageSettings....................................................................................................45
6.5.1ConfiguringDisplaySettings..............................................................................................45
6.5.2ConfiguringOSDSettings...................................................................................................51
6.5.3ConfiguringText OverlaySettings......................................................................................53
6.6ConfiguringandHandlingAlarms..........................................................................................53
6.6.1ConfiguringMotionDetection...........................................................................................54
6.6.2ConfiguringTamperproofAlarm.......................................................................................57
6.6.3ConfiguringExternalAlarmInput......................................................................................58
6.6.4ConfiguringAlarmOutput.................................................................................................60
6.6.5HandlingException............................................................................................................61
6.6.6ConfiguringEmailSettings.................................................................................................62
6.6.7ConfiguringSnapshotSettings...........................................................................................63
Chapter7RecordSettings......................................................................................................65
7.1ConfiguringNASSettings.......................................................................................................65
7.2ConfiguringRecordingSchedule............................................................................................66
Chapter8Playback................................................................................................................71
Chapter9LogSearching.........................................................................................................75
Chapter10Others....................................................................................................................77
10.1ManagingUserAccounts.......................................................................................................77
10.2ConfiguringRTSPAuthentication...........................................................................................80
10.3ConfiguringAnonymousVisit................................................................................................80
10.4ConfiguringIPAddressFilter..................................................................................................81
10.5ViewingDeviceInformation..................................................................................................81
10.6Maintenance..........................................................................................................................82
10.6.1RebootingtheSpeedDome...........................................................................................82
10.6.2RestoringDefaultSettings.............................................................................................82
10.6.3Importing/ExportingConfigurationFile........................................................................83
10.6.4UpgradingtheSystem....................................................................................................83
10.7RS232Settings......................................................................................................................84
10.8RS485Settings......................................................................................................................85
Appendix.......................................................................................................................................86
Appendix1SADPSoftwareIntroduction............................................................................................86
Appendix2PortMapping...................................................................................................................88

UserManualofIRNetworkSpeedDome7
Chapter1Overview
1.1 SystemRequirement
Systemrequirementofwebbrowseraccessingisasfollows:
OperatingSystem:MicrosoftWindowsXPSP1andaboveversion/Vista/Win7/
Server2003/Server200832bits
CPU:IntelPentiumIV3.0GHzorhigher
RAM:1Gorhigher
Display:1024×768resolutionorhigher
WebBrowser:InternetExplorer7.0andaboveversion,AppleSafari5.02andabove
version,MozillaFirefox3.5andaboveversionandGoogleChrome8andabove
versions.

1.2 Functions
Note:Thefunctionsvarydependingonthemodelsofspeeddome.
ScanModes
Thedomeprovides5scanmodes:autoscan,tiltscan,framescan,randomscanand
panoramascan.
Presets
Apresetisapredefinedimageposition.Whenthepresetiscalled,thedomewill
automaticallymovetothedefinedposition.Thepresetscanbeadded,modified,
deletedandcalled.
LabelDisplay
Theonscreenlabelofthetimeanddomenamecanbedisplayedonthemonitor.
Thedisplaysoftimeandspeeddomenamecanbeprogrammed.
AutoFlips
Whenatargetobjectgoesdirectlybeneaththespeeddome,operatingthespeed
dometomonitortheobject,thespeeddomewillautomaticallyrotate180degreesin
horizontaldirectiontomaintaincontinuityoftracking.
3DPositioning
Intheclientsoftware,usetheleftkeyofmousetoclickonthedesiredpositioninthe
videoimageanddragarectangleareainthelowerrightdirection,thenthedome
systemwillmovethepositiontothecenterandallowtherectangleareatozoomin.
Usetheleftkeyofmousetodragarectangleareaintheupperleftdirectiontomove
thepositiontothecenterandallowtherectangleareatozoomout.
ProportionalPan/Tilt
Proportionalpan/tiltautomaticallyreducesorincreasesthepanandtiltspeeds
accordingtotheamountofzoom.Attelephotozoomsettings,thepanandtilt

UserManualofIRNetworkSpeedDome8
speedswillbeslowerthanatwidezoomsettings.Thiskeepstheimagefrommoving
toofastontheliveviewimagewhenthereisalargeamountofzoom.
AutoFocus
Theautofocusenablesthecameratofocusautomaticallytomaintainclearvideo
images.
Day/NightAutoSwitch
Thespeeddomesdelivercolorimagesduringtheday.Andaslightdiminishesatnight,
thespeeddomesswitchtonightmodeanddeliverblackandwhiteimageswithhigh
quality.
SlowShutter
Inslowshuttermode,theshutterspeedwillautomaticallyslowdowninlow
illuminationconditionstomaintainclearvideoimagesbyextendingtheexposure
time.Thefeaturecanbeenabledordisabled.
BacklightCompensation(BLC)
Ifyoufocusonanobjectagainststrongbacklight,theobjectwillbetoodarktobe
seenclearly.TheBLC(BacklightCompensation)functioncancompensatelighttothe
objectinthefronttomakeitclear,butthiscausestheoverexposureofthe
backgroundwherethelightisstrong.
WideDynamicRange(WDR)
Thewidedynamicrange(WDR)functionhelpsthecameraprovideclearimageseven
underbacklightcircumstances.Whentherearebothverybrightandverydarkareas
simultaneouslyinthefieldofview,WDRbalancesthebrightnesslevelofthewhole
imageandprovideclearimageswithdetails.
Note:Thisfeaturevariesdependingonspeeddomemodels.
WhiteBalance(WB)
Whitebalancecanremovetheunrealisticcolorcasts.Whitebalanceisthewhite
renditionfunctionofthecameratoadjustthecolortemperatureaccordingtothe
environmentautomatically.
Patrol
Apatrolisamemorizedseriesofpredefinedpresetfunction.Thescanningspeed
betweentwopresetsandthedwelltimeatthepresetareprogrammable.
Pattern
Apatternisamemorizedseriesofpan,tilt,zoom,andpresetfunctions.Bydefault
thefocusandirisareinautostatusduringthepatternisbeingmemorized.
PowerOffMemory
Thedomesupportsthepoweroffmemorycapability.Itallowsthedometoresume
itspreviouspositionafterpowerisrestored.
ParkAction
Thisfeatureallowsthedometostartapredefinedactionautomaticallyafteraperiod
ofinactivity.
UserManagement
Thedomeallowsyoutoedituserswithdifferentlevelsofpermission,intheadmin
loginstatus.Multipleusersareallowedtoaccessandcontrolthesamenetwork
speeddomevianetworksimultaneously.

UserManualofIRNetworkSpeedDome9
3DDigitalNoiseReduction
Comparingwiththegeneral2Ddigitalnoisereduction,the3Ddigitalnoisereduction
functionprocessesthenoisebetweentwoframesbesidesprocessingthenoisein
oneframe.Thenoisewillbemuchlessandthevideowillbeclearer.


UserManualofIRNetworkSpeedDome

10
Chapter2NetworkConnection
Beforeyoustart:
IfyouwanttosetthenetworkspeeddomeviaaLAN(LocalAreaNetwork),
pleaserefertoSection2.1SettingtheNetworkSpeedDomeovertheLAN.
IfyouwanttosetthenetworkspeeddomeviaaWAN(WideAreaNetwork),
pleaserefertoSection2.2SettingtheNetworkSpeedDomeovertheWAN.
2.1 SettingtheNetworkSpeedDomeovertheLAN
Purpose:
ToviewandconfigurethespeeddomeviaaLAN,youneedtoconnectthenetwork
speeddomeinthesamesubnetwithyourcomputer,andinstalltheSADPorclient
softwaretosearchandchangetheIPofthenetworkspeeddome.
Note:ForthedetailedintroductionofSADP,pleaserefertoAppendix1.
2.1.1 WiringovertheLAN
Thefollowingfiguresshowthetwowaysofcableconnectionofanetworkspeed
domeandacomputer:
Purpose:
Totestthenetworkspeeddome,youcandirectlyconnectthenetworkspeed
dometothecomputerwithanetworkcableasshowninFigure21.
RefertotheFigure22tosetthenetworkspeeddomeovertheLANviaaswitch
orarouter.

Figure21ConnectingDirectly
NetworkCable

UserManualofIRNetworkSpeedDome11

Figure22ConnectingviaaSwitchoraRouter
2.1.2 DetectingandChangingtheIPAddress
YouneedtheIPaddresstovisitthenetworkspeeddome.
Steps:
1. TogettheIPaddress,youcanchooseeitherofthefollowingmethods:
UseSADP,asoftwaretoolwhichcanautomaticallydetecttheonline
networkspeeddomesintheLANandlistthedeviceinformationincludingIP
address,subnetmask,portnumber,deviceserialnumber,deviceversion,
etc.,showninFigure23.
Usetheclientsoftwaretolisttheonlinedevices.Pleaserefertotheuser
manualofclientsoftwarefordetailedinformation.
2. ChangetheIPaddressandsubnetmasktothesamesubnetasthatofyour
computer.
3. EntertheIPaddressofnetworkspeeddomeintheaddressfieldoftheweb
browsertoviewthelivevideo.
Notes:
ThedefaultIPaddressis192.0.0.64.Thedefaultusernameisadmin,and
passwordis12345.
Foraccessingthenetworkspeeddomefromdifferentsubnets,pleasesetthe
gatewayforthenetworkspeeddomeafteryouloggedin.Fordetailed
information,pleaserefertoSection6.3.1ConfiguringTCP/IPSettings.
SpeedDome
PC
Network
Cable
SwitchorRouter

UserManualofIRNetworkSpeedDome12

Figure23SADPInterface
2.2 SettingtheNetworkSpeedDomeovertheWAN
Purpose:
ThissectionexplainshowtoconnectthenetworkspeeddometotheWANwitha
staticIPoradynamicIP.
2.2.1 StaticIPConnection
Beforeyoustart:
PleaseapplyastaticIPfromanISP(InternetServiceProvider).WiththestaticIP
address,youcanconnectthenetworkspeeddomeviaarouterorconnectittothe
WANdirectly.
Connectingthenetworkspeeddomeviaarouter
Steps:
1. Connectthenetworkspeeddometotherouter.
2. AssignaLANIPaddress,thesubnetmaskandthegateway.RefertoSection2.1.2
DetectingandChangingtheIPAddressfordetailedIPaddressconfigurationof
thespeeddome.
3. SavethestaticIPintherouter.
4. Setportmapping,E.g.,80,8000and554ports.Thestepsforportmappingvary
dependingondifferentrouters.Pleasecalltheroutermanufacturerforassistance
withportmapping.
Note:RefertoAppendix2fordetailedinformationaboutportmapping.
5. Visitthenetworkspeeddomethroughawebbrowserortheclientsoftwareover
theinternet.

UserManualofIRNetworkSpeedDome13

Figure24AccessingtheSpeedDomethroughRouterwithStaticIP

ConnectingthenetworkspeeddomewithstaticIPdirectly
YoucanalsosavethestaticIPinthespeeddomeanddirectlyconnectittothe
internetwithoutusingarouter.RefertoSection2.1.2DetectingandChangingtheIP
AddressfordetailedIPaddressconfigurationofthespeeddome.

Figure25AccessingtheSpeedDomewithStaticIPDirectly
2.2.2 DynamicIPConnection
Beforeyoustart:
PleaseapplyadynamicIPfromanISP.WiththedynamicIPaddress,youcanconnect
thenetworkspeeddometoamodemorarouter.
Connectingthenetworkspeeddomeviaarouter
Steps:
1. Connectthenetworkspeeddometotherouter.
2. Inthespeeddome,assignaLANIPaddress,thesubnetmaskandthegateway.
RefertoSection2.1.2DetectingandChangingtheIPAddressfordetailedLAN
configuration.
3. Intherouter,setthePPPoEusername,passwordandconfirmthepassword.
4. Setportmapping.E.g.80,8000and554ports.Thestepsforportmappingvary
dependingondifferentrouters.Pleasecalltheroutermanufacturerforassistance
withportmapping.
Note:RefertoAppendix2fordetailedinformationaboutportmapping.
5. Applyadomainnamefromadomainnameprovider.
6. ConfiguretheDDNSsettingsinthesettinginterfaceoftherouter.
7. Visitthespeeddomeviatheapplieddomainname.




UserManualofIRNetworkSpeedDome14
Connectingthenetworkspeeddomeviaamodem
Purpose:
ThisspeeddomesupportsthePPPoEautodialupfunction.Thespeeddomegetsa
publicIPaddressbyADSLdialupafterthespeeddomeisconnectedtoamodem.
YouneedtoconfigurethePPPoEparametersofthenetworkspeeddome.Referto
Section6.3.3ConfiguringPPPoESettingsfordetailedconfiguration.

Figure26AccessingtheSpeedDomewithDynamicIP

Note:TheobtainedIPaddressisdynamicallyassignedviaPPPoE,sotheIPaddress
alwayschangesafterrebootingthespeeddome.Tosolvetheinconvenienceofthe
dynamicIP,youneedtogetadomainnamefromtheDDNSprovider(E.g.
DynDns.com).Pleasefollowbelowstepsfornormaldomainnameresolutionand
privatedomainnameresolutiontosolvetheproblem.

NormalDomainNameResolution

Figure27NormalDomainNameResolution

Steps:
1. Applyadomainnamefromadomainnameprovider.
2. ConfiguretheDDNSsettingsintheDDNSSettingsinterfaceofthenetworkspeed
dome.RefertoSection6.3.4ConfiguringDDNSSettingsfordetailed
configuration.
3. Visitthespeeddomeviatheapplieddomainname.

PrivateDomainNameResolution

UserManualofIRNetworkSpeedDome15

Figure28PrivateDomainNameResolution

Steps:
1. InstallandruntheIPServersoftwareinacomputerwithastaticIP.
2. AccessthenetworkspeeddomethroughtheLANwithawebbrowserorthe
clientsoftware.
3. EnableDDNSandselectIPServerastheprotocoltype.RefertoSection6.3.4
ConfiguringDDNSSettingsfordetailedconfiguration.


UserManualofIRNetworkSpeedDome

16
Chapter3AccesstotheNetwork
SpeedDome
3.1 AccessingbyWebBrowsers
Steps:
1. Openthewebbrowser.
2. Intheaddressfield,inputtheIPaddressofthenetworkspeeddome,e.g.,
192.0.0.64andpresstheEnterkeytoenterthelogininterface.
3. Inputtheusernameandpasswordandclick.
Note:Thedefaultusernameisadmin,passwordis12345.

Figure31LoginInterface

4. Installthepluginbeforeviewingthelivevideoandoperatingthespeeddome.
Pleasefollowtheinstallationpromptstoinstalltheplugin.

UserManualofIRNetworkSpeedDome17

Figure32DownloadandInstallPlugin

Figure33InstallPlugin(1)

Figure34InstallPlugin(2)

UserManualofIRNetworkSpeedDome18

Figure35InstallPlugin(3)

Note:Youmayhavetoclosethewebbrowsertoinstalltheplugin.Pleasereopen
thewebbrowserandloginagainafterinstallingtheplugin.
3.2 AccessingbyClientSoftware
TheproductCDcontainstheclientsoftware.Youcanviewthelivevideoandmanage
thespeeddomewiththeclientsoftware.
FollowtheinstallationpromptstoinstalltheclientsoftwareandWinPcap.The
configurationinterfaceandliveviewinterfaceofclientsoftwareareshownbellow.

Figure36ClientControlPanel

UserManualofIRNetworkSpeedDome19

Figure37ClientLiveViewInterface

Notes:
IfyouusethirdpartyVMSsoftware,pleasecontacttechnicalsupportofour
branchforcamerafirmware.
Fordetailedinformationaboutclientsoftwareofourcompany,pleasereferto
theusermanualofthesoftware.Thismanualmainlyintroducesaccessingtothe
networkspeeddomebywebbrowser.
