Sea Eagle Boats SE-330 Quick start guide

Sport Kayaks
SE330 & SE370
Instructions & Owner’s Manual
Sea Eagle Boats, Inc.
19 N. Columbia Street, Suite 1
Port Je󰀨 erson, NY 11777
1-800-748-8066
September 2016

1
Manufacture’s Certications
Our kayaks comply with ISO 6185 standard established by the International Organization for
Standardization.
NMMA (for USA only) certication means that the kayak, sold in the United States, has been judged
by the National Marine Manufacturer’s Association to be in compliance with the U.S. Coast Guard
Regulations and American Boat and Yacht Council (ABYC) standards and recommended practices.
Sea Eagle Warranty
Sea Eagle products come standard with a 3 year warranty against manufacturing defects The
warranty begins the date that your product is delivered. Sea Eagle must inspect equipment in order
to determine if there is a defect. In the event that an item must be shipped back to us, Sea Eagle will
only reimburse the standard return shipping charge through FedEx, UPS, or U.S.P.S. at published
shipping rates. Fees charged by retail shipping outlets, like The UPS Store, will not be reimbursed
and you are responsible for handling and packing charges.
Sea Eagle will refuse delivery on packages without a valid return authorization number and will not be
responsible for shipping or handling charges. To obtain a return authorization number, please contact
Sea Eagle directly, unless you purchased from an authorized dealer/reseller in which case contact
them for more information.
If you receive a damaged item, please call the shipping carrier to report the issue. Do not return
damaged merchandise until it has been inspected by the carrier. Sea Eagle will be notied by the
carrier when they have completed their inspection and if necessary, Sea Eagle will arrange for the
repair or replacement of damaged merchandise.
See complete warranty details at SeaEagle.com/Warranty.
Congratulations on purchasing a Sea Eagle!
With over 45 years of experience in designing, selling and using these
quality inflatables, we’re confident that you are going to love your Sea
Eagle and we’re ready to proudly stand behind them.

2
Decals, Stickers & Registration
Contact your state boating authorities for information on boating registration and regulations.
Most states require you to register your boat if you are using a motor. (Please note, Sea Eagle Sport
Kayaks are not rated for use with a motor.)
Upon registration it may be required to provide the Manufacturer’s Statement of Origin. Purchases
made through an authorized dealer or reseller may require for you to contact them directly in order
to obtain this. You may be charged your own state sales tax if you were not charged sales tax at the
time of purchase.
Registered boats generally require for the registration number to be applied to the boat. We do not
recommend the use of decals or stickers as they tend to crack and peel over time with the repeated
inflation and deflation of your Sea Eagle. Instead we suggest applying these numbers to a small
piece of hard plastic or marine plywood and hanging it from your boat like a license plate if permitted
by your state. Another method is to apply the numbers to the hull using either PVC based paint or
permanent marker.
Contact Us
Unlike many other companies today we pride ourselves on answering the phone and helping you with
any concerns, questions or special ordering needs that you may have! Feel free to give us a call at
1-800-748-8066 and we will be happy to talk with you! Our business hours are Monday to Friday from
9AM to 5PM, EST.
Sea Eagle Boats Inc.
19 N. Columbia Street, Suite 1
Port Jefferson NY 11777
1-800-748-8066
[email protected]

3
Safety
In a manual of this type, it is impossible to give adequate space to the topic of water safety. For further information on
boating safety, visit USCGBoating.org or enroll in a water safety course by a local provider.
It is your responsibility to be aware of and comply with all relevant safety regulations. For all water recreation or sport,
you should have reasonable swimming abilities. It is strongly advised that you should never go boating alone.
General Boating Safety Tips
• Always wear a USCG approved PFD (life vest) at all times while on the water.
• Be aware of your local boating rules and regulations and abide by them accordingly.
• Check inflation levels each time before you go out and inflate your boat for a full 24 hours before undertaking long trips.
• DO NOT allow children to use your Sea Eagle unsupervised.
• DO NOT consume alcohol while boating or operating a boat while under the influence of alcohol or drugs.
• DO NOT drag your Sea Eagle over rocks or gravel if it can be avoided.
• DO NOT exceed the certified maximum capacities of this boat under any circumstance.
• DO NOT go boating alone.
• DO NOT use compressors, CO2or compressed air for inflation, only use Sea Eagle recommended pumps.
• DO NOT use your Sea Eagle Boat as a personal flotation device as they are not rated for that use.
• DO NOT sleep inside of your Sea Eagle while on the water.
• Bring a cell phone or other emergency contact device in a waterproof bag.
• Always tell someone of your boating plans.
Safety Equipment & Important Safety Items
The type of water conditions you are on should determine the type of safety equipment that you should have on board. For
all types of boating we strongly recommend that every passenger wear a USCG approved PFD (personal flotation device)
like a life vest. In most places this is a requirement by law, but it is also an exercise of good judgment to have a PFD for all
passengers
Drinking Water & Snacks: Kayaking is a physical activity that can work up both a thirst and a sweat. On a hot or warm
day it is smart to have drinking water readily available to prevent dehydration. Bring a good amount of water for all
passengers.
Extra Clothes/Layers: Weather can change in an instant and it’s a good idea to come prepared with extra clothing. Store
extra clothing in a dry (waterproof) bag in case of emergency.
First Aid-Kit: The contents of the kit may vary depending upon your preferences, but make sure to carry a kit that reflects
the possible dangers for the conditions you are in.
Manual Pump/Repair Kit: Although our boats are both durable and rugged, it may be possible that you need to make a
repair while on the water so you’ll need the repair kit and a manual pump to re-inflate the boat. If this is your first repair,
you may also want to bring this instruction manual with you.
Sun/Rain Protection: A hat can protect both your face and head from the rain or sun. Sunscreen will help prevent serious
damage to your skin from the sun and the sun’s reflection from the water. Reapply sunscreen as needed.
Whistle: Having a whistle readily available is a great way to attract the attention of others if assistance is needed.
Float Plan:
Similar to a pilot’s Flight Plan, consider having a Float Plan (www.floatplancentral.org). Always tell someone where you
are going to be boating and what time you plan to return. Keep a cell phone in a waterproof container that will float if it falls
in the water.

4
Operating Your Sea Eagle
Lake & Stream Paddling
• Keep drain valve closed tightly and properly to keep water out of the kayak
• Start o󰀨 slowly
• Hold your paddle out in front of you with your arms as straight as possible
• Keep your eyes up and focused on the horizon
• Build up speed to maintain a true heading
Note: If you dig in too hard at rst, the kayak will tend to yaw (move side to side)in the water. When you’re paddling
with a partner (tandem), try to coordinate your strokes so that you’re both paddling in unison.
With practice, you will learn to comfortably paddle straight and reasonably fast.
Ocean & Sea Kayaking
If you are not familiar with the ocean, take appropriate care when kayaking in the ocean or sea.
• Stay within range of an active lifeguard station
• NEVER go into ocean waves that are rougher than you can handle
• DO NOT lose sight of oncoming waves
• DO NOT exhaust yourself
It is always better to end the day early and safe than to push your luck when you’re tired.
Whitewater Rapids
Kayaking in whitewater can be a very challenging and rewarding experience. It can also be very dangerous for those who
do not respect the power of fast moving water.
• Be certain you are a strong swimmer
• Enroll in a water safety course provided by your local Auxiliary Coast Guard or Power Squadron
• Learn as much about the river as possible before going down it!
• Be prepared to deal with changing conditions or dangers that may arise.
• Keep the drain valve open to allow water to escape.
Wear a helmet and gloves and have rescue ropes.
Note: There are 6 classes of whitewater di󰀩culty ranging from Class I (easy) to Class VI (extremely dangerous). Sea Ea-
gle Sport Kayaks are rated for use in up to Class III (intermediate). Class III rapids should not be attempted by beginners
as conditions become dangerous.
A great source of background for the topic of whitewater as well as various paddling techniques is Cecil Kuhne’s Inat-
able Kayaking (ISBN 0-8117-2810-2).
Sailing
Turn your Sea Eagle into a sailing vessel with the Sea Eagle QuikSail (sold separately) that takes less than a minute to
set up.
• Kayak sailing enhances your paddling experience and is great for touring.
• Paddle upwind then sail downwind.
• The QuikSail can be used as a hand-held sail with the handles located on each side.
• Adjust the position of the sail with your feet and use your paddle to guide and steer your kayak.

5
Infl ation & Set Up
Roll out kayak on a
hazard free, fl at
surface.
Remove the White
Valves from the
plastic bag.
Foot Pump
Unravel the hose
and press the top &
bottom of the pump
to release the black
clip.
INFLATION: Valves & Pumps
White Valves
Three valves for the
chambers on the
kayak and 2 for each
seat.
Stretch the
retainer ring over
the valve base then
screw the valve into
the base tightly.
Unscrew the outer
cap to reveal the
infl ation port.
*Tip: Stretch the
retainer ring with
 ngers before sliding
the bases.
Insert the larger
end of the wide
adapter into the
hose and twist to
lock in place.
The wide ended
adapter works on
every valve on the
kayak and seats.
MB-80 Electric
Pump (OPTIONAL)
This electric pump
works using the 12V
power outlet in a car
or with the optional
Minn Kota Power
Center.
Insert the hose into
the “INFLATE” port
of the foot pump.

6
First, make sure
the pump is
switched OFF
before inserting the
power adapter into
car’s power outlet.
Insert the air outlet
directly into the
valve.
Note the valve
adapters and black
tube that come with
the MB-80 are not
necessary for Sea
Eagle Boats.
WARNING: When using the battery connector,
attach the red clip to the positive terminal and the
black clip to the negative terminal. Cross connecting
wires could damage both the pump and boat.
Battery Connector
(OPTIONAL)
Powers the MB-80
by connecting it
directly to a 12V car
or marine battery.
Warning:
Air compressors
that are designed
for other uses,
like tire infl ation
can easily harm
infl atables which
work at a much
lower pressure of 1
PSI. For this reason,
we recommend only
using Sea Eagle
pumps.
INFLATION: Inflation & Set-Up
Locate the 3 main
valves at the stern
(back). Labeled
in the photo is the
fl oor chamber (#1),
and the two side
chambers (#2 and
3). Use the plastic
infl ation monitor
to ensure proper
infl ation.
Side Infl ation
Printed in blue, on
the inside of the
side chambers is a
scale (1-10). Infl ate
until the black lines
of the Infl ation
Monitor match the
blue lines on the
kayak.
Note: Check blue
repair kit for Infl ation
Monitor.
Floor Infl ation
Insert hose with
adapter into
the fl oor valve
and pump until
resistance is felt
and the fl oor is
 rm.
Infl ate the side
chambers. Use
the plastic infl ation
monitor to ensure
proper infl ation.
The lines may not
perfectly match but
should be close.

7
If the Infl ation Monitor
is lost, a ruler can be
used (10cm or 4”).
Deluxe Infl atable
Seats
Attach valves as
shown for the
kayak. Infl ate the
seats so that they
are comfrotably
 rm.
Tighten valves
very firmly to avoid
defl ation.
SEC Infl atable
Seats
Attach valves as
shown for the
kayak. Infl ate the
seats so that they
are comfortably
 rm.
Tighten valves
very firmly to avoid
defl ation.
Seat Placement
If paddling solo,
position the seat just
aft of the kayak’s
mid-point.
If paddling tandem,
position the rear
seat as far back as
possible and the front
seat slightly forward of
the mid-point.
AB30 Kayak Paddle
This four-part paddle
comes with right
and left blades, two
shafts and two drip
guards.
Insert the shaft piece
with the button into
the piece with the
three holes. Lock the
button into the middle
hole.
Slide drip guards onto
the end of the shafts,
nearest the blades.
Attach blades to the
shafts by pressing
the button down and
inserting the blade
until the button pops
up.
Spray Skirts can be
infl ated with just a few
pumps from the foot
pump.
seat as far back as
possible and the front
seat slightly forward of
the mid-point.

8
Water Drain
A self-bailing drain
at the back of the
kayak allows water
to escape when left
open in rapids or
surf. When paddling
in calm waters, keep
the drain closed.
DEFLATION: Deflating, Folding & Storage
Unscrew all of the
valves from the
bases. Most of the
air will immediately
release. Excess air
will be pushed out as
the kayak is folded.
Allow a minute
or so for the
air to escape.
Fold one side
chamber over
the fl oor. Fold
the other side
over the  rst
side.
Fold starting from
the bow (front).
Ensure compact
storage by folding
tightly from the
start. At the end,
tuck the bow
into the hull and
place the skeg
protectors over the
skegs.
Storage
PVC can become brittle in cold temperatures, be sure
to store in an area where sudden impacts are not
possible to avoid damage.
If leaving the Sea Eagle outside during paddling
season, be sure to keep it raised up off of the ground.
It’s also a good idea to keep it covered so that it is not
directly exposed to berries, leaves, rain, sunlight and
other elements.
Sea Eagles that are left in water will most likely have
to be emptied from time to time.
Make sure that the kayak and accessories are dry
before storing to remove moisture that could cause
mildew.
Choose a cool, dry spot when storing in an enclosed
area like basement, closet or garage.
Rodent proof the storage area. Mice can do a lot of
damage. Use a container with a tight lid, such as
a clean garbage can or large plastic bin if storing
outside or in a shed is the only option.
Avoid excessive heat when storing. Do not store
kayak in an attic or metal shed.
Once folded, simply
slide the kayak
into the Carry Bag.
Disassemble the
paddles defl ate & fold
seats and slide into
the bag with the foot
pump and repair kit.
The additional holes
in the shaft are for
“feathering” the
blades. Blades can be
offset from each other
to make paddling into
a stiff breeze easier
as the blade that is
not in the water will be
able to slice through
the wind with little
resistance.

9
Troubleshooting: Air Leaks
If your boat is losing air it doesn’t necessarily mean
that it has a hole. For instance a boat that is inflated
late in the day with 90° air may cool 20° overnight.
The cooler air will exert less pressure on the hull and
the boat will appear softer the next morning. When
there has been no variation in temperature and your
boat is losing air then it is time to start looking for the
leak.
Crossed Threads
Make sure that both
the inner valve and
the outer cap are
 rmly screwed to-
gether. If threads
are crossed on either
part, a slow leak
could result. A good
way to avoid this is to
 rst turn the outer cap
back 1/4 turn.
Visual Inspection
The first thing you should do when looking for a leak
is to actually look at the boat. Visually inspect the boat
from a few feet away and if necessary, flip it over and
closely check the outside. Any large leaks should be
clearly visible.
Listen
If you have a rough idea of where your leak is
but can’t see it, you may want to try listening for it
as you may be able to hear the air escaping and
pinpoint the leak.
Denting
Check the O-Ring
base for dents.
Denting can occur
when the valve
body lies across
the O-Ring during
storage. Heat
the O-Ring with a
hairdryer for about a
minute or so until the
dent eases itself out.
Soapy Water Test
Inflate the boat
to full pressure.
Mix a couple of
tablespoons of dish
washing liquid in a
bucket of water.
Spread the soapy
water on the leaking
chamber with a
large sponge or
hand towel. The leak may produce bubbles or
make whistling or sputtering noises. Often, spray
bottles don’t work.
Skeg Straightening
If for any reason the
skeg(s) becomes
bent, there is an
easy solution to
straightening it.
Diaphragm
Check the black
diaphragm at the
bottom of the inner
valve for grains
of sand and other
debris. Also check
the threads on the
inner valve, kayak
hull and outer cap for
any dirt or sand which
might break the seal.
Troubleshooting: Bad Tracking
The most common cause of bad tracking is a bent
skeg which can cause the kayak to pull to one
side. Skegs can bend when the kayak is folded too
tightly.

10
Using a hair dryer,
warm the skeg until
the curve becomes
soft & pliable. This
should only take
about 2-3 minutes
on a normal setting.
Once the skeg(s)
is soft, you can
straighten it with your
hands.
Even though your Sea Eagle is very rugged and
tough, you may still experience the occasional
puncture. Fortunately most repairs are fairly easy
and only take a few minutes.
For an extensive repair please contact us directly
for assistance or a quote to have it sent back and
repaired at our facility. Repair fees start at $75.00
and do not include return shipping charges.
Repairs
Repair Kit
All Sea Eagles come
standard with a repair
kit that includes
patching material and
tubes of PVC glue.
Pinholes
Defl ate the kayak
and thoroughly clean
and dry the area that
is to be repaired.
For small punctures,
less than 1/8”, apply
a small drop of glue
and allow 12 hours
to dry.
Patching
Leaks that are larger
than a pinhole can
be patched. Most
patches can be done
in a few minutes, but
we do o󰀨 er a repair
service for more
complex jobs.
Note: A small paint
brush (not included)
can come in handy for
spreading glue.
Make sure to
thoroughly clean the
area surrounding
the leak of any dirt
or grime. After the
area is clean and
dry circle the area
to make locating
the leak easier
throughout the repair
process.
Using a pencil
or ballpoint pen,
trace the outline
of the patch which
should be large
enough to overlap
the damaged area
by approximately
1/2”. Angle the
pen inward a bit so
that the ink will be
covered by the patch
later.
Apply adhesive to the
one side of the patch
and around the area
to be repaired. Coat
the a󰀨 ected area
lightly but completely
with glue.

11
Place the patch on
the damaged area
and press down
 rmly. Let the glue sit
for 2-4 minutes until
it appears tacky. If
glue does not hold,
heat patch with a
hair dryer for about
a minute and re-seat
the patch.
Use a hair dryer on
the high setting to
activate the adhesive
and then press  rmly
on the patch until it
cools.
Note: NEVER use
a hair dryer on an
infl ated kayak.
DO NOT USE GLUE
ON ACCESSORIES
Sport Kayaks are
manufactured with a
type of (stretchable)
PVC material that
cannot accommodate
the use or application
of gluing on D-Rings,
Scotty™ Glue On
Mounts or other glue
on accessories that
can cause stress and
damage your kayak.
Accessories (OPTIONAL)
We o󰀨 er a wide
variety of accessories
to use with your Sea
Eagle Sport Kayak.
QuikSail (OPTIONAL)
Converts any kayak
into a sailing vessel.
Easily deploys in under
one minute, breaks
down to just 43” for
convenient storage in
the bow or stern and
sails up to 45 degrees
left or right. Comes
complete with separate
instruction manual.
3M Marine Cleaner &
Restorer (OPTIONAL)
Cleans, shines,
conditions and
protects vinyl, rubber
and plastic surfaces.
Deep cleans dirt &
grime, enhances
appearance.
Restores natural
sheen. Fresh lemon
scent.
EZ Cart Small
(OPTIONAL)
Transport your
kayak from your car
to the water and
back with ease.
Quickly assembles &
disassembles.
Personal Flotation
Devices (OPTIONAL)
U.S.C.G. approved. Life
jackets, paddling vest,
PFD Belts available in
various sizes.