Sea Eagle Boats Fish-n-Troll Quick start guide

Fish-n-Troll
Instructions & Owner’s Manual
For video instructions visit, SeaEagle.com/Instructions
Sea Eagle Boats, Inc.
19 N. Columbia Street, Suite 1
Port Jeerson, NY 11777
1-800-748-8066
July 2016

2
Sea Eagle Fish-n-Troll
(fully assembled with 4’ straps)
Check all parts are included and lay out all parts on a clean, dry area.
• 1 - 48” x 8” aluminum board with 8 pre-drilled holes
• 2- 4’ Sea Eagle self-locking straps (not included with SE9)
• 2 - Scotty Rod Holders
• 2 - Scotty Deck Mounts
• 8 - #6 x 1” screws
* You need a Phillips head screwdriver for the one time only pre-assembly
(Straps not included
with SE9)
(Straps not included
with SE9)

3
Remove the Scotty Deck
mount bases from the rod
holders. The bases attach to
the 4 holes on either side of
the board.
Place the bases over the
holes in the board with
the “INBOARD” arrow
pointing to the center of
the board.
Using a #2 phillips head
screwdriver, secure the
mounts to the board with
the #6 screws.
Align the slot in the rod
holder with the key in the
base. Push the rod holder
into the base. When the key
goes through the slot, turn
the rod holder to the desired
position, push down to lock
in place.
Adjust the angle of the rod
holder by loosening the
large screw knob.
Mounting the Fish-n-Troll:
Secures to the SE9 via the motormount frame and attaches to
FastTrack™ and Explorer™ kayaks with adjustable self-locking
straps.
To FastTrack & Explorer
Place the board
between the 4 rings
at the back of the
kayak.
Flip a 4’strap
upside down
and slip the end
through the
front d-ring, then
through the back
d-ring.
Loop the strap
over the board
and through the
cinch lock on the
other end of the
strap.
Pull the strap tight
to secure to the
Fish-n-Troll to the
kayak.
Repeat on the
other side.

4
To the SE9
Place the
Fish-n-Troll
between the 4
motormount
grommets at the
back of the boat.
Slide a
motormount
bar through the
back grommet
and over the
Fish-n-Troll.
Continue to
push the bar
through the front
grommet.
Once the bar is in
place, secure the
motormount bar
with the pin.
Repeat on the
other side.
Contact Us
Unlike many other companies today we pride ourselves on
answering the phone and helping you with any concerns,
questions or special ordering needs that you may have! Feel
free to give us a call at 1-800-748-8066 and we will be happy
to talk with you! Our business hours are Monday to Friday from
9AM to 5PM, EST.
Sea Eagle Boats Inc.
19 N. Columbia Street, Suite 1
Port Jefferson NY 11777
631-473-7308
1-800-748-8066
[email protected]
Sea Eagle Warranty
All Sea Eagle products come standard with a 3 year warranty
against manufacturing defects The warranty begins the date that
your product is delivered. Sea Eagle must inspect equipment in
order to determine if there is a defect. In the event that an item
must be shipped back to us, Sea Eagle will only reimburse the
standard return shipping charge through FedEx, UPS, or U.S.P.S. at
published shipping rates. Fees charged by retail shipping outlets,
like The UPS Store, will not be reimbursed and you are responsible
for handling and packing charges.
Sea Eagle will refuse delivery on packages without a valid return
authorization number and will not be responsible for shipping
or handling charges. To obtain a return authorization number,
please contact Sea Eagle directly, unless you purchased from an
authorized dealer/reseller in which case contact them for more
information.
If you receive a damaged item, please call the shipping carrier to
report the issue. Do not return damaged merchandise until it has
been inspected by the carrier. Sea Eagle will be notied by the car-
rier when they have completed their inspection and if necessary,
Sea Eagle will arrange for the repair or replacement of damaged
merchandise.
See complete warranty details at SeaEagle.com/Warranty.