Seada SP-H14B User manual

VER 1.2
1×4 HDMI 18Gbps Splitter
SP-H14B

1/5
Thank you for purchasing this product
For optimum performance and safety, please read these instructions
carefully before connecting, operating or adjusting this product. Please keep
this manual for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged
by electrical spikes, surges, electric shook, lighting strikes, etc. Use of surge
protection systems is highly recommended in order to protect andextend the
life of your equipment.
Table of Contents
1. Introduction...........................................................................................
2. Features.................................................................................................
3. Package Contents...............................................................................
4. Specifications.......................................................................................
5. Operation Controls and Functions......................................................
6. Application Example............................................................................
2
2
2
3
3
5
1

1. Introduction
2. Features
☆HDMI 2.0b, HDCP 2.2 compliant
☆Supports video format up to 4K2K@60Hz with 8 bit RGB/YCBCR
4:4:4/YCBCR 4:2:2
☆Support 3D frame sequential video format up to 1080p@60;
☆Supports 3D frame sequential video format up to 4K2K@30Hz
☆Supports high resolution VESA mode video format up to QSXGA@60Hz
☆Supports LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio
☆Supports smart EDID control
☆Compact design for an easy and flexible installation
3. Package Contents
①1× 1×4 HDMI 18Gbps Splitter
②1× 5V/1A DC Power Adapter
③1× User Manual
1x4 HDMI 18Gbps Splitter is an advanced solution for splitting a single
HDMI signal to 4 HDMI displays. It provides high performance audio and
video output through HDMI cables up to 4K2K@60Hz 4:4:4 and is capable
of receiving and transmitting up to 18Gbps of bandwidth with no data loss.
（Supporting the latest features you can be assured of reliable and high quality HDMI
distribution.）
2/5
Website: www.seada.co.uk E-mail: [email protected]

4. Specifications
Video Bandwidth 600MHz/18Gbps
Human Body model: ±8kV (Air-gap discharge) ,
±4kV (Contact discharge)
Power Supply 5V/1A DC (US/EU standards，CE/FCC/UL certified)
Dimensions
Weight
Chassis Material Metal
Silkscreen Color Black
Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity 20~90% RH (non-condensing)
Power Consumption 2W
Input Ports
Output Ports
ESD Protection
5. Operation Controls and Functions
Technical
1×HDMI Type A[19-pin female]
4×HDMI Type A[19-pin female]
63mm (W) × 163mm (D) × 16mm (H)
Output Resolution 480i ~1080p50/60, 4Kx2K@24/30, 4k2k@60Hz
260g
3/5
Website: www.seada.co.uk E-mail: [email protected]

34
Number Name Function description
1 POWER LED This blue LED illuminate when the device is
connected with power supply.
2 IN LED This blue LED illuminate when the Source
connected to the device.
3 OUT LED
These blue LEDs will light up to indicate which
HDMI outputs are connected to an active TV/
display/monitor.
4 SERVICE Firmware update use only.
5
EDID STD
When in 'STD' mode, the unit will use its own
built-in EDID settings. In this mode, the video
output will be set to 1080p@60Hz and the
audio output at LPCM 2CH Stereo. Use this
mode if there are display problems in TV Mode.
6
EDID TV
When in 'TV' mode, the unit will read the
EDID settings of the display device connected
to HDMI OUT 1. If it detects a 4K2K capable
EDID setting it will transmit the signal in that
format to all outputs. If no 4K2K capable EDID
is detected then the unit will output the best
resolution that all displays can support.
HDMI OUT 1~4
Connect each of the HDMI outputs to an HDMI
display for simultaneous HDMI distribution, or
cascade the output to another transmitter to
extend the operating distance.
7 HDMI IN
Connect the input port to the HDMI splitter
output of your source device such as a DVD
player or set-top box with an HDMI cable.
8 DC 5V Plug the 5V DC power supply into the unit and
connected the adaptor to an AC outlet.
4/5
Website: www.seada.co.uk E-mail: [email protected]

6. Application Example
5/5
Website: www.seada.co.uk E-mail: [email protected]