REMOTE CONTROL LAYOUT
POWER BUTTON
Press once to switch the TV
on. Press again to switch
the TV off. (see page 8)
CHANNEL SELECTION _- ,
Select the desired channel'
directly with buttons 0 EFt
through 9. (see page 9) i Pc M
L...... Z)
SLEEP BUTTON .........
Use this button to set the
sleep time. (see page 14) ........
Press this button to watch the
previously viewed channel. _EP _-w APe
(see page 9) :i::: _
TVNIDEO BUTTON ....
Pressthis button toselectthe
TV or VIDEO mode. (see
page8)
RECALL Bu'n'ON
Use this button to check the
channel number.
Also, use this button to clear
the on-screen display. (see
page 10)
CAPTION BUTTON
Use this button to obtain the
CAPTION or TEXT function.
(see page 15_t 7)
• BATTERIES
The Remote Control is powered by
batteries. Batteries should be changed
after approximately one year use to
ensurecontinuedgoodperformance.
•Remove the batterycompartmentlid by
slidingitinthedirectionofthearrow.
• Remove the batteries and insert two
typeAA batteries.
NOTE : For correct polarity,refer to the
diagraminthe batterycompartment.
WARNING : Batteries installed with
incorrect polaritymay leak and damage
yourset. Do notmixbatteriesoldand new,
carbonandalkalinetypes.
MUTE BUTTON
Press once to turn the
volume off.
Press again to restore the
volume. (see page 9)
CHANNEL +(UP)/-(DOWN)
BUTTONS
Pressthe CHANNEL +(UP)
/-(DOWN) buttons to scan
through the memorized
channels. (seepage9)
......VOLUME +(UP)/-(DOWN)
BUTTONS
Press the VOLUME +(UP)
buttonto increase volume and
the VOLUME -(DOWN) button
tolowervolume. (see page9)
Also, use these buttons to
adjust the desired PICTURE
and MODE in the various
functions. (see page 8, 11,
12, 13, 16, 17)
.....PICTURE BUTTON
Use this button to select
_icture element (contrast,
rightness,color,tint, shar-
pness)for adjustment.(see
page 13)
-SET UP BUTTON
Press this buttonto obtain
thevariousfunctionintheTV
mode.(see page11_12)
..... APC BUTTON
Use this button to selectthe
factorypreset. (seepage 13)
BATTERIES (1.5V X 2) AA
7
