Sears LXI series 934.49019990 User manual

Owner's Manual
FEATURES
19" COLOR TELEVISION
Model No: 934.49019990
• Tinted, Bright Black Matrix PlctureTube
• 181 Channel Selection- All VHF/UHF channels plus up to 125 cable channels.
•PLL Frequency Synthesized Tuning-The latest PLL frequency synthesized electronic ttJ
ing system provides free and easy channel selection, and lets you tune directly to any
channel using the channel number buttons (0-9 and +f00-key) on the remote control.
•On-Screen Function Display.
•Full-Function Remote Control
•Sleep Timer
•Closed Caption Decoder-You may view specially labeled (cc) TV programs, movies,
news, prerecorded tapes, etc. with either adialogue caption or text display added to the
program.
•Auto Shut Off Function- if there is no air signal input from the antenna terminal and no
operation for 15 minutes, the TV will turn itself off automatically.
PRECAUTION
•Place yourTV in a roomwithadequate ventilation.
•KeepyourTV set awayfrom sourcesofdirectheat,suchas heat registersor directsun-
light.
•Do not placeyourTV on softsurfaces,suchas rugsor blankets.
•Leaveenoughroomfor air to circulatearoundthe bottom,topand back of the sat.
The serial number of this product may be found on the back of the TV. No others have the
same serial number as yours. You should record the number and other vital information ber_
and retain this book as a permanent record of your purchase to aid identification in case of
theft.
Date of Purchase Dealer Phone No.
Dealer Purchase from Modal No.
Dealer Address Serial No.
This Owner's Manual Is made of recyc/ed paper.

WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLI-
ANCE TO RAIN OR MOISTURE.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSON-
NEL.
THIS SYMBOL INDICATES THAT DAN-
GEROUS VOLTAGE CONSTI-TUTING .a
RISK OF ELECTRIC _HOCK IS PRE-
SENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT
THERE ARE IMPORTANT OPERATING
AND MAINTENANCE INSTRUCTIONS
IN THE LIT_RATIJRE ACCOMPANY-INC
THE APPLIANCE.
The important note 18 located on the rear of the Cabinet.
IMPORTANT SAFEGUARDS
NATIONALELECTRICALCODE ANTENNA
LEAP IN
WIRE
GROUND
CLAMP
ANT£NN_
01°CHARGE UNIT
{_EC SECTION 610-20)
GROUNOING _ONOUOTORS
(NEC SECTION 810._1)
GROUND CLAMPS
OUNDIN(_
.-- ELECTRODE SYSTEM
S2898A INEC ART 250 _ART HI
1. Read instructions-All the safety and operating
instructions should be read before the appliance
is operated.
2. Retain Instructions-The safety and operating
instructions should be retained for future refer-
ence.
3. Heed Warnings-All warnings on the appliance and
in the operating instructions should be adhered to,
4. Follow Instructions-All operating and use ldairuc-
tions should be followed.
5. Cleaning-Unplug "rv from the wall outlet before
cleaning. DO not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
EXCEPTION: A product that is meant for uninter-
rupted service and, thet for some specific reason,
such as the possibility of the loss of an authoriza-
tion code for aCATV conveder, is not intended to
be unplugged by the user forcleaning or any
other purpose, may exclude the reference to
unplugging the appliance in the cleaning descrip-
tion otherwise required in item 5.
6. Attachments-Do not use attachments not recom-
mended by the TV manufacturer as they may
cause hazards.
7. Water and Moisture-Do not use this TV near
water, for example, near a bath tub, wash bowl,
kitchen sink, or laundry tub, in a wet basement, or
near a swimming poct, and the like,
8. Acceseodes-Do not place this TV on an unstable
cart, stand, tdpod, bracket, or teble. The TV may
fall, causing serious injury to someone, and sed-
pus damage to the appllence. Po_T_ _ w*_
Use only with a cart, stand, td-
pod, bracket, or table recom-
mended by the manufacturer, or
soM with the T_Z
Any mounting of the appliance
should follow the menufecturer's
mounting accessory recommended by the manu-
facturer. An appliance and cart combination
sbouid be moved withcare.QuiCk stops, exces-
sive force, and uneven surfaces may cause the
appliance and cart combinetion to o_ertum.
9. Ventilelfon*Slote and openings inthe cabinet and
the beck or bottom are provided for ventilation and
to ensure raiieqle operation of the "rv and to pro*
toct it from overheabng, these openings must not
be blocked orcovered. The openings should never
be blocked by piecing the TV on a bed, sofa, rug,
or other similar surface. This TV should never be
pieced near or over a radiator or heat register.
This TV should not be placed in a built-in installa-
tion such as a bookcase or rack unless proper
ventiletion is provided or the mahutecturer'°
instructions ha_e been adhered to.
10.Power Soutoes-This TV should be operated only
from the type of power source indicated on the
marking label. If you are net sure of the type of
power supply to your home, cOnsultyour appli-
ance dealer or local power company. For TVs
intended to operate from battery power, or other
sources, refer to the operating instructions.
11 .Grounding or Poledzetion-This TV is equipped
with a poladzeq alternating-current line ptug(a
plug having one blade wider _n the other). This
plug witl fit into the power outlet only one way.
This isa safety feature. If you are unable to insert
the plug fully into the outlet, try reversing the plug.
If the plug should stillfail to fit, contact your elec-
triclen to replace you_ obsolete outleL Do not
defeat the safety purpose of the polarized plug.
12.Power-Cord Preteetlefl-POwer-supply cords should
bo routed so that they are not likely to be walked
on or pinot_ by items pfeoeq upon or against
them, paying particular atten6on to cords at plugo,
conven!e.nce_recep.te=_._es,and the point where
13.Outdoor Antenna grounding-If an outside antenna
or cable system is connected to the TV, be sure
the antenna or cable system is grounded so as to
provide some protection against vOltage su_jes
and built-up static charges. Article 810 of the
National Electrical Code, ANSI/NFPA No. 70, prc-
vides information with respect to proper grounding
of the mast and supporf_ng structure, grounding of
the lead-in wire to an antenna discharge unit, size
of grounding conductors, location of antenna-dis-
charge unit, connection to grounding electrodes,
and requirements for the grounding electrode.
(Fig, A)
t4.Lighthing-For added pmteetion forthis TV receiver
duddg a lightning storm, or when it is left unat-
tended and unused for _periods of time,
unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent dam-
age to the TV due to lightning and ix_ver-line
surges.
15.Power Lines-An outside antenna system should
not be lecated in the viclblty of overhead power
fines or other electric light of power circuits, or
where it can fail into such power fines or circuits.
When installing an outside antenna system,
extreme care should be taken to keep from touch-
ing such power lines or °ircults as contact with
them might be fatal.
16.Ovedoeding-Do net oveddad wall outlets and
extension cords as this can result in arisk of fire
or electric shock.
f7.0bject and Liquid Entry-Never push objects of
any kind into this TV through openings as they
may touch dangerous voltage points or short out
parts that could result in a fire or electric shock.
Never spiti liquid of any kind on the TV
18.ServisIUg-Do not attempt to service this TV your-
self a0 opening or removing covers may e_pose
you to dangerous voltage or other hazards. Refer
all servicing to qualified service personnel
19,Damags Requiring Service-Unplug thisTV from
the Wail outlet and refer servicing to qualified ser-
vice personnel under the following conditions:
a.When the power supply cord or plug is damaged
or frayed.
b.lf liquid has been spilfeq, or of_-ts have fallen
into the TV.
c.If the TV has been exposed to rain or wate_
d.lt the TV does not operate normally by following
the operating instructions. Adjust only those con-
trois that are covered by the operating instruc-
tions, as improper adjustment of other controLs
may result in damage and will often require exten-
sive work by a qualified technician to restore the
TV to its normal operation,
e. If the TV has been dropped or damaged in any
way.
f. When the TV exhibits a distinct change in perfor-
mance*this indicates aneed for service.
20.Replacameot Parts-Wben reqlecement parts are
required, be sure the service technician uses
replacement parts specified by the manufacturer
that have the same characteristics as the original
pen_ Unaethodzed °ubeitt_.dlons may result in fire,
electric shock, injury to persons or other hazards.
21 .Setety Check-Upon completion of any service or
repairs to this TV, ask the service technician to
perform routine satety checks to determine that
the TV is in proper operating condition,
22.Heat-Thle TV product should be situated away
from heat sources such a_ radiators, heat regis-
ters, stoves, or other products (including ampli-
tiers) that produce heat.

PREPARATION FOR USE
I|,..1+[etlV;_el: _.'!;I I _J ti[o|L.
If you want to change the language of the on-screen menu, follow the procedure below.
Connect the power cord to a standard AC outlet.
Press the POWER button to turn on the TV.
Press the MENU button so that the menu display appears
on the TV screen.
Press the CH(annel) • or • button to point to "[ENGLISH]",
_5
Select "ENGLISH" or "ESPAI_IOL" = Spanish by using
the VOL(ume) • or • button.
Press the MENU button to exit the menu.
• ICTURE
CHANNEL SET
CAPTION [OFF]
[ENGLISHIESPAi_OL
PICTURE
CHANNEL SET
CAPTION [OFF]
• [ENGLISH]ESPAi_L
]-"r;|_l_lq Ir._=] =k-t=l Iil_[_
To preset a channel or to change a preset channel, follow the procedure below.
Press the POWER button to turn on the TV.
Press the MENU button so that the menu display appears
on the TV screen.
Press the CH(annel) • or • button to point to "CHANNEL SET".
Then, press the VOL(ume) • button.
•PICTURE
CHANNELSET
CAPTION[OFF]
[ENGLISH]ESPANOL
PICTURE
•CHANNEL SET
CAPTION [OFF]
[ENGLISH]ESPAi_OL
Press the CH(annel) • or • button to point to "AUTO MEMO".
Then, press the VOL(ume) • button.
The tuner scans and memorizes all active channels in
your area.
• The TV distinguishes between standard TV channels
and cable channels.
• When AUTO MEMO action is completed, the lowest
memorized channel reappears on the screen.
• When you press the CH(annel) • or • button after
selecting AUTO MEMO, the tuner will stop at the memorized
channels only.
[ADD/DELETE FUNCTION]
1) Press the MENU button so that the menu display appears on the TV
screen.
2) Press the CH(annel) •or • button to point to "CHANNEL SET".
Then, press the VOL(ume) • button.
3) Press the VOL(ume) • button so that "ADD/DELETE" is selected.
4) Use the CH(annel) •or • button to select the
channel you wish to put into memory or to erase from memory.
Note: The display will return to the screen in about 10 seconds.
Perform "ADD/DELETE" function while this display appears on the
screen.
• Press the VOL(ume) • or • button to light up the channel number
in LIGHT BLUE if you wish to add the channel into memory.
• Press the VOL(ume) •or • button to Pight up the channel number
in LIGHT FED if you wish to erase the channel from memory.
5) Press the MENU button to exit the menu.
I DD/DELETE
• AUTO MEMO
IPICTURE
• CHANNEL SET
CAPTION [OFF]
[ENGLISH]ESPAi_OL
•DD/DELETE
AUTO MEMO

ANTENNA/CABLE CONNECTIONS
VHF
Antenna
(Not supplied)
Antenna
(Not supplie
UHF/VHF Rod
Antennapli_
(Not sup
*Some cableTV systemsuse scram-
bledsignalsand requirea specialcon-
verter to receivethese channels.
Consultyourlocalcable company*.
VHF/UHF Combiner l
(Not supplied)
VHF/UHF nna_l_ /
Combination Ante
(Not supplied) I_ ,_a
CLOSED CAPTION
CATV BOx*
or SatelliteBox
(Not supplied)
OUT IN From Cable System
or SatetlifeAntenna
75-ohm
75-ohm CoaxialCable
Coaxial Cable
This "IV can receive C1 and C2 of Caption and Text.
(1)Charasters can be displayed on the TV screen when the received broadcast signal con-
tains the Caption Signals.
(2) Paint-on mode: Displays input characters on the screen immediately.
Pop-on mode: Once characters are stored in memory, it is displayed all at once.
Roll-up mode: Displays the characters continuously by scrolling (max. 4 lines)
Note: If the CAPTION C1 or C2 is selected but the caption signal is not included, characters
will not be displayed.
E]b, FromCable System
FCC WARNING- This equip-
ment may generate or use
radio frequency energy.
Changes or modifications to
this equipment may cause
harmful Interference unless
the modifications are express-
ly approved In the InntmcUon
manual.The user could lose
the authority to operate this
equipment/f an unauthor/zed
change or modification is
made.
INote to CATV system Installer:
This reminder isprovidedto call the CATV system installer's attentionto Article 820-40 of
the NEC that providesguidelinesfor propergroundingand, in particular,specifiesthat
the cableground shallbe connectedto the groundingsystem of the buildingas closeto
lthe paint of cable entry as practical.
Notes:
(1)When yourTV receivesaspecialeffectsplaybacksignal(i.e., Search, Slow,Still)froma
VCR's videooutputchannel (CH3 or CH4), yourTV may notdisplaythe correctcaptionor
text.
(2)Captionsand textsmay notmatchthe TV voice exactly.
(3)Interferencemaycause the closed captionsystemnotto functionproperly.
(4)The caption or textcharacterswillnot be displayedwhilethe menu displayor function's
displayisshown.
(5)ff you see this ecreenl!
II r:_311;vj_;I"*[
(1) Displaysthe textonthe screenby scrolling(max.7 lines)
(2) Ifthe receivedbroadcastsignaldoes not containthe captionor textsignal, nochangewill If your"iV displaysa blackbox onthe screen,this means thatyourTV isset toTEXT mode.
occur. Toclearscreen, selectCAPTION C1, C2 or CAPTION [OFF].

OPERATING CONTROLS AND FUNCTIONS
- FRONT PANEL -
1
-REMOTE CONTROL-
ooooo0
TT TT d-
2 3 45IIII.']IP.1111111IellIII;II:P_1II:I:II:t¢ll
1. MENU button- Pressto display the menu
on the TV screen.
2, VOLUME Air buttons- Pressto control
the volume level.
Press to determine a settingmode from
the menu on the TV screen.(only the VOL
• button)
Pressto selactoradjustfromaparticular
menu.(forexample:LanguageSelection,
ChannelPresetting,ClosedCapfian
Selection,PictureAdjustment)
3. CHANNEL _buttons- Presstoselect
memorizedchannel
Pressto selecta setting mode fromthe
menuon the TV screen.
Pressto select itemyouwant toadjust in
the picturecontrolmode.
4, POWER button- Pressto turn the "IV ON
and OFF.
5. Infrared Sensor Window- Receivesthe
infraredcontrolsignalsfromthe remote
controlunit.
6. CHANNEL NUMBER button- Presstwo
digitsto directlyaccessthe desiredchan-
nel,Remember to pressa "0"before a
singledigitchannel,
+100 button- Presstoselect cable chan-
nelswhichare equal or greaterthan num-
ber 100,
7. MUTE button- Pressthe MUTE buttonto
turnoffthe soundportionofthe"IV pro-
gram.(Volumelevel displayturns LIGHT
RE[} fromLIGHT BLUE.) Press the
MUTE buttonagain or pressthe
VOL(ume) • or•buttonto restore
sound.
-REAR PANEL-
8. CHANNEL RETURN button- Pressthis
buttontogo back to the previouslyviewed
channel.Forexample, pressingthe
CHANNEL RETURN buttononcewill
changechanneldisplayfrom CH 3 (pre-
sentchannel)to CH 10 (previously
viewedchannel),and pressingit a second
time willreturnfromCH 10 toCH 3.
9. DISPLAY button- Pressto displaythe
channel numberonthe screen.If you
press itagain, the channelnumberwill
disappear.
IO.SLEEP button- Pressthe SLEEP button
tOdisplaythe sleeptimerand startthe
function.The shutofftime canbe deter-
mined bythe numberof timesyou press
the button.(0, 10, 20, 30,..90, 0 minutes)
11.ANT(enne). IN jack- Connectto an
antenna,cable system,orsatellitesys-
tem.
12.AC cord- Connectto a standardAC out-
11
[]
Slide Me batterycompartmentcover on the
remote unit.
[]
Insert 2 "AA" penlight batteries into battery
compartmentin the direction as indicated by
the polarity(+ /-) markings.Batteries
inststlad with incorrect polarity may damage
the remote unit.
Replace the cover.
let (120V/60Hz).

OPERATIONS
['JLqll]'i=l r_,lw]lIII€+IILrll__I|vivl,_'ll[_]:ll_.[q r_,llvJ _1:{eI _-'r*_ILt
1) Press the POWER button to turn on the TV.
2) Select the desired channel with the CH(annel) •or •button.
3) Adjust the volume to the desired listening level using the VOL(ume) • or •button.
4) Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)
1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the VOL(ume) • button so that "PICTURE" is selected.
3) Select the feature you wish to adjust with the CH(annel) • or • button and adjust it with
the VOL(ume) • or • button.
l+'_Iill_(tli-'I=_.'1l!:1:l".JIIILVdq
The sleep timer function enables you to shut off the power without press-
ing the POWER button after a desired time period.
1) Press the POWER button to turn on the TV and press the SLEEP but-
ton on the remote control.
2) You may change the sleep time with pressing the SLEEP
button on the remote control repeatedly. The timer is set u
to 90 minutes, 10 minutes each time the SLEEP button is
pushed. (The timer display counts up and sleep timer will
be displayed on the screen when you press the SLEEP
button on remote control.)
SLEEP10
FTo cancel the sleep timer:
Press the SLEEP button
repeatedly until "SLEEP O" is
displayed.
GAME MODE
Set to the most suitable position for TV
GAME
[+] : ON
[-] : OFF
BRIGHT
Adjust until the whitest parts of the picture
are as bright as you prefer.
[+] :increase brightness
[-] : decrease brightness
CONTRAST
Adjust to increase or decrease contrast,
Notes:
• In the above steps, the picture adjust-
ment displaywill disappear from the TV
screen after about 10 seconds unless
you press any buttons,even though you
may notbe finished. Press the MENU
and VOL(ume) •buttonso that "PIC-
TURE" is selected.Then, press the
CH(annel) • or • button repeatedly
until the displayreturnsto the screen.
•If you adjust the other Picture control
after you set the Game mode to [ON],
Note: When you disconnect the unit from the AC outlet, or if you have apower failure, the
sleep time will be lost.
[e,]l[e_._::ll][e,7,_1=,TIII[e]_IK1_l_[_ll[e+_
You may view specially labeled (cc) TV pro-
grams, movies, news, prerecorded tapes,
etc. with either a dialogue caption or text dis-
play added to the program.
I<kM : Press the VOL(ume) •or • button. I
1) Press the MENU button so that the menu
display appears on the TV screen.
2) Press the CH(annel) • or • button to
point to "CAPTION".
3) Press the VOL(ume) • or • button to
select the mode you wish.
4)When done, press the MENU button to exit
the menu.
[+] : increase contrast
[-] :decrease contrast
COLOR
Adjust to be brilliant or pale color.
[+] : be brilliant color
[-] : be pale color
TINT
Adjust to obtain natural skin tones.
[+] : greenish tone
(-J :reddish tone
the Game mode is set to [OFF] automat-
ically, If you want to set the Game mode,
reset it to [ON].
I _ : Press the CH(annel) • or • button,
CHANNEL SET CHANNEL SET CHANNEL SET CHANNEL SE'f CHANNI_L SET
p, CAPTIONIGFF ] _I_CApTION[ C1] _I_CAPTIONI C2 ] _ I*CAPI1ON[ TI I _ b, CAP13ON[T2]
[ENGLtSHIESPAf_L _ I [ENGUSHIESPANOL [ENGLISHIE$_>AN_,L [ENGL_H]ESPA_OL
t t I-I .I-I ]-[
H BR K_HT 1+] I'] CONTRAST [][ ] COLOR 1+] [-] TiNT [+]
000000010000000 OOOOO[3100113E]09QOOOODI[]G_O_OO[)OOD[][]O|DOUOOOO
t t

TROUBLESHOOTING GUIDE
Sometimes aperformance problem can be easily solved by checking seemingly apparent but often overlooked possibilities. Before arranging for service, check these items, It could save your
time and money.
Lu
.J
QUICK SERVICE CHECK LIST m
O
POSSIBLE REMEDY
Try a new channel, if OK, then possibl_
station trouble.
Is TV Plugged in?
Power at outtet?
Is TV's POWER button on?
Is antenna connected to terminal on
the back of the set?
If outside antenna is being used, check
for broken wire,
Check for local interference.
Turn off with POWER button and then
turn it on after about a minute.
Adjust COLOR control.
Adjust CONTRAST & BRIGHT
control.
Check batteries in Remote ControL.
> m _ _ o 03
×
x xl
Closed Caption PrOblem
My TV is showing captions
that are misspelled.
Possible Remedy
You _re watching a liye broadcast and spelling errors
med_ _hesl_s_d c_tioning production company
.may pass through uncorrected. A prerecorded pro-
gram will not show any misspelled words because of
the normal time available for editing the captions.
My TV will not show the Captions that are delayed a few seconds behind the
text in its entirety or actual dialogue are common for live broadcasts. Most
there is a delay of what is captioning production companies can display a dia-
being said. Iogue to a maximum of 220 words per minute. If a dia-
logue exceeds that rate, selective editing is used to
insure that the captions remain up*to-date with the
current TV screen dialogue.
My captions are scrambled with Interference caused by building, power lines, thunder-
white boxes on the TV screen, storms, etc. may cause scrambled or incomplete cap-
tions to appear.
My program guide listed a'rV Broadcasters may at times use a time compression
show as being closed captioned process to the actual program so that additional adver-
but none of the captions were dis- tising time can be given. Since the decoder cannot
played, read the compressed information, captions will be lost.
My prerecorded videotape does not The videotape was either an illegal copying or the
show any captions.The tape box tape duplicating company accidentally left out the cap-
mentions it being closed captioned, tioning signals during the copying process.
My TV screen shows a black box You are in the TEXT mode. Select CAPTION mode or
on certain channels. CAPTION [OFF].

MAINTENANCE SPECIFICATIONS
[tf_,1:| I?,I=11lit] II =f.,1_II+[,I |1:1=1"_ I.'! ".,I=[I.]11[I,Y:I I[e] ! I_[€'1=1_1=1¢r_,11_,.'I"J=lit| I;I [If_,11[el_,[.:
Q Wipe the front panel and other exterior surfaces of the TV with a soft cloth immersed in
lukewarm water and wrung dry.
• Never use a solvent or alcohol. Do not spray insecticide liquid near the TV. Such chemicals Closed Caption
may cause damage and discoloration to the exposed surfaces. System:
Channel coverage
VHF:
I'.,l[_tll;i= Itll:|=i II_;1_11_(,I UHF:
V_ipe the picture tube of the TV with a soft cloth. Before cleaning the picture tube, disconnect CATV:
the power cord.
SUPPLIED ACCESSORIES
Remote control unit
(N0268UD)
Batteries ("AA" x 2)
Television system: NTSC-M Remote control: Digital encoded
TV Standard infrared light system
Operating
§15.119/FCC temperature:
2~ 13 Power requirements:
14 ~69 Power consumption
2 - 13, A ~W, (Maximum):
W+I ~ W+84, Picture tube:
A-5 - A-l, 5A Dimensions:
Tuning System 181 channel
frequency synthesized
tuning system Weight:
Channel access: Direct access key- Accessories:
board,
programmable
scan and up/down
Antenna terminals: VHF/UHF/CATV
75 ohm unbalanced
(F-type)
I=iI=JellII-'i[eT__lHi,,"l-.,,I=l[etI=1[oT;_liI[el_I,,.-!
Sound output: 1W, 8 ohm
5°C to 40°C
(41°F-lO4°F)
AC120_ 60Hz
72W
19"
H : 16-3/4"(428mm)
W: 18-3/4"(475mm)
D : 18"(454mm)
37.5 Ibs. (17kg)
: Remote Control unit
with 2"AA"batteries
: Owner's Manual
•Designs and specifications are subject to
change without notice and without our
legal obligation.
- San ENERGY STAR®
Padner, Sears has
determineO that this product ml;_t s
the ENERGY STAR® guidelines for
energy efficiency¸ ENERGY STAR® is
aUS registered mark.
FULL 90 DAY WARRANTY
For 90 days from the data of purchase, Sears will repair any defect in material or workmanship in thisTV, free of charge. For one year from the date of purchase, Sears willsupply,
at no charge, replacement for defective parts.
The above warranty coverage applies only to TV which are used for private household purposes.
TO OBTAIN WARRANTY SERVICE, SIMPLY RETURN THE TV TO THE NEAREST SEARS SERVICE CENTER IN THE UNITED STATES.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears Roebuck and Co., Dept. 817WA Hoffman Estates, IL 60179
For the location of a Sears Service Center in your area : 1-800-488-1222

For in-home repair service:
Call 24 hours a day, 7 days a week
1-800-4-MY-HOME"
(1-800-469-4663)
In Spanish for all your serv ce and parts needs:
Para pedir servicio de reparacibn a domicilio: Call 1-800-676-5811
In Canada for all your service and parts needs:
Au Canada pour tout le service ou les pieces: Call 1-800-665-4455
For the repair or replacement parts you need:
Call 6 am -11 pm (CST), 7 days a week
1-800-366-PART
(1-800-366-7278)
For the location of a Sears Parts and Repair Center in your area:
Call 24 hours aday, 7 days aweek
1-800-488-1222
For information on purchasing a Sears Maintenance Agreement
or to inquire about an existing Agreement:
Call 9 am -5 pm, Monday -Saturday
1-800-827-6655
The Service Side of Sears?'
i
0EMN01520 Printed in Malaysia
L9813UP .....