Seht BT-001 User manual

BT-001
BLUETOOTH RECEIVER
USER MANUAL
Edition 0.1 (2020)

SEHT BT-001 USER MANUAL Edition 0.1
Page 2
Using the BT-001
1. Secure the BT-001 to the battery box of your headset using the hook/loop pads
provided
2. Connect the BT-001 to the auxiliary input of your headset (If using SH30-75 use
the long auxiliary cable supplied with the headset and secured to the headband
and cable as required)
3. Ensure the BT-001 is fully charged before use (Charge using the supplied USB
charging cable connected to a USB charger)
4. To put the BT-001 into pairing mode press and hold the power button for 3
seconds (until the blue LED flashes). Scan for Bluetooth devices on the device
you wish to pair with it and select the audio adaptor.
5. To turn off the BT-001 press and hold the power button for 5 seconds until blue
LED extinguishes
6. Adjust volume using the up and down buttons but ensure that you can hear radio
comms at all times
Technical Specifications
Bluetooth version: v5.0+EDR
Frequency range: 2.4GHz –2.4835GHz
Receiving sensitivity: -74dB
Operating distance: Up to 10m
Charging input voltage: 5VDC
Charging time: Approx 2 hours
Working time: Up to 4 hours
Battery: Lithium 270mA