PAROH Active Living DCX-25 User manual

Step 1: Insert batteries to the transmitter to be used e.g.door bell.
Step 2: Insert batteries to the receiver to be used
(chime unit).
Step 3: Enter pairing mode for receiver
(pager unit). Press and hold the
zone select button for 3 seconds.
The LED #1 will flash.
Step 4: Press the button again to move to the zone
you wish to pair with.
Press melody selector to scroll through the
melodies. Once you hear your preferred melody,
do not press again as it is now selected.
Step 5: Once the zone and melody are selected with the zone icon flashing,
trigger the transmitter once to pair. If successful, the receiver
wi ll generate a short tone. Press the button to exit pairing mode,
the system is ready to use.
PARTS & FUNCTION
MOUNTING
Hang on the wall
Reset
Using 2 x AA size Battery
OPEN
POWER
1. Slide to open the battery
cover
2. Insert 2 AA batteries
3. Close the battery cover.
Reset
Speaker
ID
Reset
Melody
selector
Zone select
button
Belt Clip Function switch
Vibration &
Melody
Melody
Vibration
OPEN
Battery Compartment First, press and hold the button for 3 seconds to enter the pairing mode.
Press the button to move to the zone which is to be deleted. Press and
hold the and buttons together for 3 seconds.
The receiver will generate a tone to indicate the transmitter on this zone has
been deleted.
First, press and hold the button for 3 seconds to enter the pairing mode.
Press the button to move to the zone then press the
button to select the melody required. Press the button until the pairing
mode is exited.
CODE MATCHING & TUNE SELECTION
Clear the transmitter on the Receiver memory
Change the melody in desired zone
BATTERY LOW INDICATOR
If a zone LED light is blinking, it indicates that the battery is low for this
transmitter. You must replace the battery as soon as possible.
If the Receiver beeps every 5 seconds, this indicates the Receiver batteries are
low. You must replace the batteries of the Receiver
Please replace batteries by making sure the batteries match the correct
polarity +/- markings and always replace with the same standard batteries.
RECEIVER USER MANUAL
D
LA140
CX-25
Wireless
Bathroom Pull Alarm
To stop the vibration whilst the receiver is altering, press the reset button
The crossed wheelie bin symbol reminds you
of your obligation to help reduce the impact
on the environment by recycling this product
correctly. Please contact your local authority
or retailer for information concerning the
correct disposal of this product.
0197
ISO13485
PAROH LTD B24 9FD
www.paroh.co.uk
Made in China
RoHS2
Compliant
Directive
2011/65/EU
R&TTE

TRANSMITTER USER MANUAL
Wireless
Bathroom Pull Alarm
BATTERY INSTALLATION
12V 23A
Installation
Open the mounting BracketMark the four mounting holes
on the celling or on the wall
o
/ 7mm25mm
Test the unit:
Pull the handle once, the
receiver will sound, white LED
will flash.
The Zone Icon on the receiver
will keep "on" until the reset on
the receiver or bathroom pull
havebeen press
Mount the bathroom
pull to the bracket
Code Conflict
If the bathroom pull alert coding is same of another transmitter. You
must change the code of the bathroom pull.
1. Open the cover and remove the battery.
2. Press and
3. The new code is generated.
hold the reset button, insert the battery and hold the button until
the LED flashes 5 times.
ResetMounting Bracket
Handle
HAX-600
LA140
PARTS & FUNCTION
The crossed wheelie bin symbol reminds you
of your obligation to help reduce the impact
on the environment by recycling this product
correctly. Please contact your local authority
or retailer for information concerning the
correct disposal of this product.
0197
ISO13485
PAROH LTD B24 9FD
www.paroh.co.uk
Made in China
RoHS2
Compliant
Directive
2011/65/EU
R&TTE