Sekonic LITEMASTER PRO L-478DR-A-PX User guide

1Check Included Items
The following items are included with the meter in the package.
Please be sure that everything is included. If any item is missing,
please contact the reseller that sold the meter or the distributor.
•Batteries are not included in the package. Please prepare two AAA before
use.
Startup Guide
(L-478DR-PX Series)
1CheckIncluded Items
Thefollowingitemsare included with the meter in the package.
Pleasebesurethat everything is included. If any item is missing,
pleasecontactthereseller that sold the meter or the distributor.
Batteriesarenotincluded in the package. Please prepare two AAA before
use.
StartupGuide
(L-478DR-PXSeries)
SafetyPrecaution CD-ROM
(OperatingManualand
DataTransferSoftware)
Strap Softcase Anti-glare sheet for
LCDScreen
2
Component Names
Thefollowingsarethe names of the buttons and parts on the meter.
Bottomview
Strapeyelet
Synchroterminal
Batterycoveropen
Battery
compartment
Frontview Rearview
L-478D
JR10-000001
MODEL
SEKONICCORPORATION
MADEINPHILIPPINES
Locklever
Touch
panel
Memory
button*
USB
port
Menu
button
Lumisphere
retractingring
Lumisphere
Measuring
button*
Battery
coverlatch
Power
button
Batterycover
*WhenusingtheSpot Meter attachment (separate accessory), you
Measuringbuttonfunctions.For details to do this, please see the
CustomSettingsfunctionsection in the Operating Manual on the
includedCD-ROM.
3Turningthe Power ON
Afterinsertingthebatteries according to the “+” and “-” symbol in
thebatterycompartment,press and hold the Power Button for about
1secondtostart up meter.
*Thestartupscreenwill be displayed, followed by the measuring
screen.
*Pressandholdthe Power Button for about 1 second to turn the
meteroff.
Measuringscreen
PowerButton
Titlescreen
L-478DR-PXSeries
(Phottix)
*Pleasewait3seconds between repeated power on and power off
sessions.
*
SEKONIClogoinblue will be displayed as the meter starts up.
*Forexplanationpurpose,the LCDs illustrated here show the displays of
L-478DR-PX.
4ScreenOperations
Thissectionexplainshow the touch panel on the meter is operated.
Measuringscreen Sliding:
settingvalueareasto change setting
values.
TouchOperations:
◆Settingvalueincreaseswhen the up arrow (▲) is touched.
◆ Settingvaluedecreaseswhenthe down arrow (▼) is touched.
◆ Touchicon/buttonson thescreento activate their function.
5
MeasuringPreparations (SelectingMeasuringMode)
Thisexampleexplainshow to measure light using the ambient light
Tvalue(shutterspeed) priority mode.
1)TouchtheMeasuring Mode icon at the top left of the Measuring screen to
entertheMeasuringMode Selection Screen.
Measuringscreen Measuring Mode
Selectionscreen
2)Touchtheambient T icon to select the ambient light T (shutter speed)
prioritymodeandreturn to the Measuring screen.
*Theabovescreen example shows all of the Measuring Mode visible.
3)SettheISO sensitivity and shutter speed corresponding to the camera
settingsforshooting.
Shutterspeed ISOsensitivity
6
MeasuringPreparations (SettingLumisphere)
TheLumispherecanbe extended or retracted to obtain the best
lightmeasurementsfordifferent types of subjects.
SelectingLumispheresetting
TurntheLumisphereretracting ring to set the aligning mark with the
correspondingsymbol(extended /retracted )until it clicks into
place.
ExtendedLumisphere RetractedLumisphere
(Lumidisc)
Extendedlumisphereisused to
measureilluminationofpeople,
buildings,andotherthree
dimensionalsubjects.
RetractedLumisphereisused
subjectssuchasmanuscripts,
paintings,differenceofone or
morelightsourcesfor ratio lighting
andilluminationinLux or Foot-
candle.
*Modelssoldin some countries do not display “Foot-candle” due to legal
restrictions
Extended( ) Retracted( )
Extended
Lumisphere
Lumisphere
Aligningmark
Retracted
Lumisphere
7MeasuringLight
Thissectionexplainshow to take an incident-light measurement
1)IncidentLight
Positionthemeterin front of the subject with the extended Lumisphere
facingtowardsthecamera’s lens axis. Press the measuring button to
measurethelightfalling on the subject.
2)
desiredareatobemeasured within the yellow circle and press the
measuring
SafetyPrecaution
ForProperOperation
Beforeusingthisproduct,pleasereadthis"SafetyPrecautions"for
properoperation.
WARNING
TheWARNINGsymbolindicatesthe
possibilityofdeathorseriousinjuryifthe
productisnotusedproperly.
CAUTION
TheCAUTIONsymbolindicatesthe
possibilityofminortomoderatepersonal
injuryorproductdamageiftheproductis
notusedproperly.
NOTICE
TheNOTICEsymbolindicatescautions
orrestrictionswhenusingtheproduct.
Pleasereadallnotestoavoiderrorsin
operation.
GeneralSafetyInformation
•ReadtheOperatingManualbeforeuse.
•KeeptheOperatingManualonhandforreferenceatany
time.
•Stopusingthisproductwhenthereareanyabnormalities.
•
•Donotattempttorepairthisproductbyyourself.
•Thisproductisintendedonlyforpersonswithexpert
knowledge.
•Monitorchildrensothattheydonottouchthisproduct.
•Usethisproductinausageenvironmentdescribedinthe
OperatingManual.
•Thisproductisnotwaterproof.
WARNING
Thereisadangerofelectricalshockwhenusinghigh
voltagestrobes.
Avoidcontactingtheterminals.
Thisproductemitselectromagneticwaves.
Donotbringthisproductclosetopersonswith
pacemakers.
Donotusethisproductinanexplosiveatmosphere.
Useofdevicesemittingelectromagneticwavesis
prohibitedinhospitals.
CAUTION
•Checkthematerialoftheneckstraptoseeifthereisany
riskofallergy.
•Becarefulofsuddenemissionoflightsfromstrobes.
NOTICE
•Donotleavethisproductoncardashboardsinhotweather.
Thismaydamagetheproduct.
•Removethebatterieswhenthisproductisnotinusefora
longperiodoftime.
•Whenthedesiredperformanceisnotachieved,stopusing
thisproductandcontacttheservicecenter.
InformationforUsersonCollectionand
DisposalofOldEquipment
Toprotectenvironment,donotthroughthisdevice
andbatteriesawaywiththenormalhouseholdwaste
attheendofthoselife,butbringtheminatan
English
LightMeter
L-478DR-A-PX
L-478DR-U-PX
L-478DR-PX
Pleasereadtheoperating manual carefully to fully understand the features
ofthisproduct beforeuse and keep it for future use. Keep the operating
manualinasafe place.
LITEMASTERPRO
StartupGuide
Safety Precaution CD-ROM
(Operating Manual and
Data Transfer Software)
Strap Soft case Anti-glare sheet for
LCD Screen
2
Component Names
The followings are the names of the buttons and parts on the meter.
Bottom view
Strap eyelet
Synchro terminal
Battery cover open
Battery
compartment
Front view Rear view
L-478D
JR10-000001
MODEL
SEKONIC CORPORATION
MADE IN PHILIPPINES
Lock lever
Touch
panel
Memory
button*
USB
port
Menu
button
Lumisphere
retracting ring
Lumisphere
Measuring
button*
Battery
cover latch
Power
button
Battery cover
*When using the Spot Meter attachment (separate accessory), you
may nd operation more comfortable by switching the Memory and
Measuring button functions. For details to do this, please see the
Custom Settings function section in the Operating Manual on the
included CD-ROM.
3Turning the Power ON
After inserting the batteries according to the “+” and “-” symbol in
the battery compartment, press and hold the Power Button for about
1 second to start up meter.
*The startup screen will be displayed, followed by the measuring
screen.
*Press and hold the Power Button for about 1 second to turn the
meter off.
Measuring screen
Power Button
Title screen
L-478DR-PX Series
(Phottix)
*Please wait 3 seconds between repeated power on and power off
sessions.
*When rst starting or after replacing batteries, a white screen with the
SEKONIC logo in blue will be displayed as the meter starts up.
*For explanation purpose, the LCDs illustrated here show the displays of
L-478DR-PX.
4Screen Operations
This section explains how the touch panel on the meter is operated.
Measuring screen Sliding:
Slide a nger up or down on the
setting value areas to change setting
values.
Touch Operations:
◆Setting value increases when the up arrow (▲) is touched.
◆ Setting value decreases when the down arrow (▼) is touched.
◆ Touch icon/buttons on the screen to activate their function.
5
Measuring Preparations (Selecting Measuring Mode)
This example explains how to measure light using the ambient light
T value (shutter speed) priority mode.
1) Touch the Measuring Mode icon at the top left of the Measuring screen to
enter the Measuring Mode Selection Screen.
Measuring screen Measuring Mode
Selection screen
2) Touch the ambient T icon to select the ambient light T (shutter speed)
priority mode and return to the Measuring screen.
* The above screen example shows all of the Measuring Mode visible.
3) Set the ISO sensitivity and shutter speed corresponding to the camera
settings for shooting.
Shutter speed ISO sensitivity
6
Measuring Preparations (Setting Lumisphere)
The Lumisphere can be extended or retracted to obtain the best
light measurements for different types of subjects.
Selecting Lumisphere setting
•Turn the Lumisphere retracting ring to set the aligning mark with the
corresponding symbol (extended /retracted ) until it clicks into
place.
Extended Lumisphere Retracted Lumisphere
(Lumidisc)
Extended lumisphere is used to
measure illumination of people,
buildings, and other three
dimensional subjects.
Retracted Lumisphere is used
to measure illumination of at
subjects such as manuscripts,
paintings, difference of one or
more light sources for ratio lighting
and illumination in Lux or Foot-
candle.
* Models sold in some countries do not display “Foot-candle” due to legal
restrictions.
Extended ( ) Retracted ( )
Extended
Lumisphere
Lumisphere
Aligning mark
Retracted
Lumisphere
7Measuring Light
This section explains how to take an incident-light measurement
using the extended Lumisphere and a reected-light measurement
using the optional 5-degree Viewnder attachment.
1) Incident Light
Position the meter in front of the subject with the extended Lumisphere
facing towards the camera’s lens axis. Press the measuring button to
measure the light falling on the subject.
2) Reected Light (with 5-degree viewnder attachment sold separately)
Look through the nder eyepiece from the position of camera, place the
desired area to be measured within the yellow circle and press the measuring
button to measure the light reected from the subject.
Safety Precaution
ForProper Operation
Beforeusing this product, please read this "Safety Precautions" for
properoperation.
WARNING
TheWARNING symbol indicates the
possibilityof death or serious injury if the
productis not used properly.
CAUTION
TheCAUTION symbol indicates the
possibilityof minor to moderate personal
injuryor product damage if the product is
notused properly.
NOTICE
TheNOTICE symbol indicates cautions
orrestrictions when using the product.
Pleaseread all notes to avoid errors in
operation.
GeneralSafety Information
•Readthe Operating Manual before use.
•Keepthe Operating Manual on hand for reference at any
time.
•Stopusing this product when there are any abnormalities.
•
•Donot attempt to repair this product by yourself.
•Thisproduct is intended only for persons with expert
knowledge.
•Monitorchildren so that they do not touch this product.
•Usethis product in a usage environment described in the
OperatingManual.
•Thisproduct is not waterproof.
WARNING
Thereis a danger of electrical shock when using high
voltagestrobes.
Avoidcontacting the terminals.
Thisproduct emits electromagnetic waves.
Donot bring this product close to persons with
pacemakers.
Donot use this product in an explosive atmosphere.
Useof devices emitting electromagnetic waves is
prohibitedin hospitals.
CAUTION
•Checkthe material of the neck strap to see if there is any
riskof allergy.
•Becareful of sudden emission of lights from strobes.
NOTICE
•Donot leave this product on car dashboards in hot weather.
Thismay damage the product.
•Removethe batteries when this product is not in use for a
longperiod of time.
•Whenthe desired performance is not achieved, stop using
thisproduct and contact the service center.
Informationfor Users on Collection and
Disposalof Old Equipment
To protect environment, do not through this device
andbatteries away with the normal household waste
atthe end of those life, but bring them in at an
English
Light Meter
L-478DR-A-PX
L-478DR-U-PX
Thank you for purchasing the LITEMASTER PRO L-478DR-PX Series.
This Startup Guide introduces the basic operating functions of this light meter.
For specific details on this light meter, please see the Operating Manual on
the CD-ROM (included in the package).
LITEMASTER PRO
L-478DR-PX
Startup Guide

Radio Flash Mode (for L-478DR-PX Series)
10
Setting Radio Triggering Mode and Channel / Groups
The following describes how to set the Radio Flash Mode with Phottix.
1) Touch the Measuring mode icon ( ) at the top left of the Measuring
screen and then select the Radio Flash Mode ( ).
The following describes how to select the channel and group for
using Phottix.
1) Touch the Tool Box icon ( ) at the bottom right of the Measuring
screen to display the Tool Box screen.
2) Touch the [STRATO CH/Group] button to display the STRATO CH/Group
Setting screen.
3) Touch the arrows ▲/▼or slide your nger over the screen to select a
channel from 1 to 4.
4) Touch one or more Groups (A, B, C, D) to select the ash groups you want
to use.
* Group to use can be selected from Flash Control Screen as well.
5) Touch [OK] to conrm settings and return to the Measuring screen. (Touch
[Cancel] to go back to the Measuring screen without change.)
* See more details for Strato II by Phottix at www.phottix.com
Measuring screen
STRATO CH/
Group Setting screen
Groups
Channel Numbers
Tool Box
8Checking Measured Value
This example explains how to observe exposure value using the
ambient light T value (shutter speed) priority mode.
F stop value (aperture) is displayed for ambient light in T (shutter
speed) priority mode.
Measuring
button
Measured
Value
9_1Measuring Modes (ambient light)
The following describes the other measuring modes available to
meet your shooting needs.
* Measuring Modes can be added or removed in the Custom Setting Mode.
Icon Mode Details
Ambient light T (shutter speed) priority mode
Displays f-stop values (apertures numbers) for input shutter
speed and ISO values.
Ambient light F stop(aperture) priority mode
Displays shutter speed values for input F stop and ISO values.
Ambient light TF (Shutter speed and F stop) priority mode.
Displays ISO value for input shutter speed and F-stop.
Ambient light HD Cine mode
Displays F-stop value for input shutter speed, frame rate and ISO
values.
Ambient light Cine mode
Displays F-stop value for input frame rate (f/s), ISO, and shutter
angle values.
Ambient light Illuminance (lux) mode
Displays brightness values in lux units.
Ambient light Illuminance (fc) mode *1
Displays brightness values in foot-candle units.
Ambient light Luminance (cd/m2) mode (by reected light
measurement using with accessory viewnder available as
separate purchase)
Displays brightness values in cd/m2units.
Ambient light Luminance () independent display mode *1(by
reected light measurement using with accessory viewnder
available as separate purchase)
Displays brightness values in foot-lambert units.
Icon Mode Details
Cordless mode
Detects ash brightness without meter-ash connection after
measuring button pressed to arm meter for 90 seconds and ash
red separately.
Displays f-stop values (apertures numbers) for input shutter
speed and ISO values.
Cordless multi (cumulative) ash mode
Detects and accumulates ash brightness without meter-ash
connection after measuring button pressed to arm meter for 90
seconds and ash red separately.
Displays f-stop values (apertures numbers) for input shutter
speed and ISO values.
Cord (PC) mode
Detects ash brightness with PC cord meter-ash connection.
Displays f-stop values (apertures numbers) for input shutter
speed and ISO values.
Cord multi (cumulative) ash mode
Detects and accumulates ash brightness with PC cord meter-
ash connection.
Displays f-stop values (apertures numbers) for input shutter
speed and ISO values.
Radio ash mode *2
Detects ash brightness without meter-ash connection after
radio transmitted trigger signal is received by radio-receiver
connected ash.
Displays f-stop values (apertures numbers) for input shutter
speed and ISO values.
Radio multi (cumulative) ash mode *2
Detects and accumulates ash brightness without meter-ash
connection after radio transmitted trigger signal is received by
radio-receiver connected ash.
Displays f-stop values (apertures numbers) for input shutter
speed and ISO values.
*1Models sold in some countries do not display “fc” and “” due to legal
restrictions.
*2L-478DR-PX Series only. Phottix receivers and/or built-in ash units are
required to work with radio system of Strato II.
9_2Measuring Modes (flashlight)
Radio Flash Mode (for L-478DR-PX Series)
11_1
Flash Measurement
The following describes how to trigger the ash units to measure
total exposure in Radio Flash Mode.
1) Set the desired shutter speed and ISO sensitivity on the Measuring screen.
2) Press the Measuring button to trigger the ash units that have been set in
advance with channel and groups.
3) To select a different group or combinations of groups for an exposure
measurement, go to the Tool Box or the Flash Control screen (See next
page).
7-24-14, Oizumi-Gakuen-cho, Nerima-ku Tokyo
178-8686 JAPAN
TEL [phone] FAX [phone]
http://www.sekonic.com
JR6L9762-PX_en-00
NOVEMBER 2015
Printed in Philippines
Measuring screen
Mode Select
Measuring Mode
screen
Measuring Mode
screen
Shutter Speed
ISO sensitivity
Go to Flash
Control screen
Set channel number
and groups
Measuring screen
Tool Box
Measuring screen
Flash Control
screen
Settings
(Channel, shutter speed
and ISO sensitivity)
1
2
3
Radio Flash Mode (for L-478DR-PX Series)
11_2
Flash Measurement
The following describes how to trigger the ash units of each group
in Flash Control screen.
1) Touch the Flash Control icon ( ) on the Measuring
screen to display the Flash Control screen.
2) Select one of Groups (A to D) 3and press the Measuring
button to trigger the ash for the selected Group.
3) The measured value is displayed at the center of screen
1and over the selected Group button 2.
4) Manually set the ash power level to the ash unit.
5) Press the Measuring button to trigger the ash again for
measurement to conrm that the ash power is set to
desired value.
6) Repeat 2) and 5) above to select and measure other
Groups 3until all ash units have been measured
and the desired F-number is above each Group
button 2.
7) Select all Groups you want to use for the nal
exposure measurement, and press the Measuring
button. Measured value for each Group 2will not
change. The F-number for the measured brightness
of all lights will be displayed in the center of screen
1as total exposure.
* To set ISO sensitivity and shutter speed, press the
Radio Flash Mode icon ( ) to go back to the
Measuring screen.
* If you want to change the channel, press the
CH/Group Selection icon ( ) to directly go
to Strato CH/Group Setting screen (black
background). When pressing [OK], the screen
goes back to the Group Measuring screen.
* Phottix ®is the registered trademark and StratoTM is the
trademark of Phottix Hong Kong Ltd.
GroupsChannel
Numbers
STRATO CH/
Group Setting
screen