
R E F E R E N C E L E N G T H QTY.
C O N T E N T
A WW040x118-STPP-000-0-
B WW040x118-S1IF-000-0-
2980 2
600 35
I M A G E
PO_ _ _ _ _ _ _ _ _ _ _ _ _ _
REF.
Slope Top
Plank milled on 1 side
Profile plank
Roof beam
E WW040x118-S2IF-000-0- 2980 40
F1 WW040x118-SAV1-000-0- 4480 1
G WW040x118-S2IF-000-0- 4180 21
I WW040x073-SDEM-000-0- 2980 2
J WW019x123-PRF-000-0- 4480 29
K1 WW040x145-PT0-MD3-0- 3130 5
K2 WW040x145-4FA-000-0- 236 8
K3 WW040x145-4FA-087-0- 236 5
M1 WW016x087-FEM-000-0- 4512 2
M2 WW016x095-PLA-000-0- 4512 4
M3 WW016x087-MAL-000-0- 4512 2
M4 WW016x087-FEM-000-0- 3320 2
M5 WW016x095-PLA-000-0- 3320 4
M6 WW016x087-MAL-000-0- 3320 2
N1 WW016x072-2R8-000-0- 350 4
N2 WW016x072-2R8-000-0- 350 4
F2 WW040x118-SAV1-IF1-0- 4480 2
Profile plank D WW040x118-PRF-000-0- 550 17
C2 WW040x118-SB1H-000-0- 1900 1
C1 WW040x118-SB1F-000-0- 1900 1
NOAM - E9641|
Plank milled on 1 side, recess at the top
Plank milled on 1 side, recess at the bottom
4 surfaces planed
4 surfaces planed
Cladding board female
Cladding board male
Finishing corner
Cladding board
Cladding board female
Cladding board
Cladding board male
Finishing corner
Plank milled on 2 sides
Plank milled on 2 sides, extension on both sides
Plank milled on 2 sides, extension on both sides, milled at the top
Plank milled on 2 sides
Plank milled on 2 sides, cut in half lengthwise
List of parts / After sales service
P1Door wing E9901
Door Frame E9901-K40
Lock
S6744
Glass
S647
ALU profile
E9951
E9901-ALU
Flush bolt
P2
P3
P4
P5
P6 1725
2
1
2
1
2
1