SELF SLPU Series User manual

SELF
POWER
UNIT
• Easy to install
• Tamper resistant acs
• Plug and play
• Rear and side exiting cord
• Lighting control option
• FCC compliant and UL listed
Standard
finishes
ELECTRICAL
Electrical Outlets rated 15A, 125Vac
Cord 10' 14-gauge AC cord & plug (flat plug
standard)
USB-A 5Vdc, 3.1A
USB-C 5Vdc, 3.1A / 9Vdc, 2A / 12Vdc, 1.5A
Wireless 3-way switch version available
CERTIFICATION
FCC compliant and UL Listed
WARRANTY
5 Years
MECHANICAL
Recessed mounting
SELF Electronics USA Corporation
Tel: [phone] Saturn Ct,Peachtree Corners,GA 30092 [email protected]
POWER UNIT

SLPU-2P2U-XX
SLPU-2P1U1C-XX
SLPU-2P2U1S-XX
SLPU-2P1U1C1S-XX
SLPU-2P2U1S-BT-XX
Dimmension(inches/mm)
Installation
6-5/16”(160) 2-1/8”(54)
2-1/2”(63)
Cut hole size:
5.94"×2.09"(151mm×53mm)
SLPU-2P2U-XX, SLPU-2P1U1C-XX
7.40"×2.09"(188mm×53mm)
SLPU-2P2U1S-XX, SLPU-2P1U1C1S-XX
SLPU-2P2U1S-BT-XX
Order Information
SLPU-2P2U-BK
SLPU-2P2U-WH
SLPU-2P2U-NI
2TR ACs, 2 USB A
2TR ACs, 1 USB A, 1 USB C
2TR ACs, 2 USB A, 1 SWITCH
2TR ACs, 2 USB A, 3-WAY SWITCHING
2TR ACs, 1 USB A, 1 USB C, 1 SWITCH
SLPU-2P2U1S-BK
SLPU-2P2U1S-WH
SLPU-2P2U1S-NI
SLPU-2P2U1S-BT-BK
SLPU-2P2U1S-BT-WH
SLPU-2P2U1S-BT-NI
SLPU-2P1U1C1S-BK
SLPU-2P1U1C1S-WH
SLPU-2P1U1C1S-NI
SLPU-2P1U1C-BK
SLPU-2P1U1C-WH
SLPU-2P1U1C-NI
Product DescriptionCatalog No.
Series FinishesModule/Port Options
SLPU
How to order using our catalog numbers
Example: SLPU-2P2U-BK
PUC S BT
TR AC Receptacle USB-A
(Rated 5Vdc, 3.1A)
USB-TYPE C port
(Rated 5Vdc, 3.1A 9Vdc,
2A / 12Vdc, 1.5A)
Switch,controls the
rear receptacle for
LED light fixtures.
Bluetooth
BK-Black
WH-White
NI-Nickel
7-12/16”(197) 2-1/8”(54)
2-1/2”(63)
SELF Electronics USA Corporation
Tel: [phone] Saturn Ct,Peachtree Corners,GA 30092 [email protected]
POWER UNIT

3-way Switching Function
(for SLPU-2P2U1S-BT-BK/SLPU-2P2U1S-BT-WH/SLPU-2P2U1S-BT-NI ONLY)
Pairing
Unpair Bluetooth for 3-way version power units
1Power on Press any power unit’s start button more than 3 seconds,
until the blue indicator beside button starts flashing, loosen the button.
Short press the button of another power unit, the blue indicator will
stop flashing, meaning the pairing is successful.
press any paired power unit’s switch, all the lights that powered by paired
power units can be contolled.
flashing
stop flashing
2
1Power on Press power unit’s start button more than 3 seconds,
until the blue indicator button starts flashing, loosen the button.
flashing
2
3
Short press the button of this power unit, the blue indicator will
stop flashing, meaning the unpairing is successful.
stop flashing
3
4
SELF Electronics USA Corporation
Tel: [phone] Saturn Ct,Peachtree Corners,GA 30092 [email protected]
POWER UNIT
3s
3s