Selkie Brooklyn User manual

SELKIE
BROOKLYN
Instruction Manual

Power Button
USB
Charging Port
Microphone
Earbud
LED Indicator
Battery Fuel Gauge

Set Up & Use:
Read on for everything you need to know
on how to make the most of your earbuds
OR
To get started right away, view our video
tutorial here: https://youtu.be/ieV2IvqONSs

Charge Case.
Plug your case into a power source using the
included micro USB cable. As the case charge,
the Fuel Gauge lights ash.
Note:
* When charging is complete, all four lights will
remain lit.
SELKIE

Charge Earbuds.
Place earbuds into the provided charger.
Note:
* The earbuds' LED will be solid red while charging.
* It takes ~1hr to charge earbuds from 0 to 100%.
* When fully charged, the earbud's LED will turn
blue briey than shut o.
* Earbud’s battery life can be checked on your
phone (when paired).
SELKIE

Dual Mode Pairing - connecting both earbuds
to device.
Step 0. Before beginning, ensure both earbuds are
powered o.
Step 1. Enter Pairing Mode for both earbuds
1.1 Hold both earbuds near your ears and
simultaneously long-press both earbuds for ~3s until
you hear a "Power On" voice prompt.
1.2 Then wait 4-5s to allow the left and right earbuds
to sync up to each other.
1.3 When the right earbud begins to ash red and blue
repeatedly, your earbuds are now discoverable and
ready to pair to your device.
Continue to next page ->
:03
L R

Step 2. Go to Bluetooth settings on your device and
select "Selkie - Brooklyn" from the list of discovered
Bluetooth devices.
Step 3. After the initial pairing, earbuds will
automatically reconnect to your last device when
powered on.
Tip:
* When pairing, make sure to hold both earbuds near
you ears and listen for the “Power On” voice prompt!
If you don’t hold the earbuds near your ears, you won’t
be able to hear the voice prompts and will have a hard
time pairing.
* If you are having trouble pairing, power o earbuds
and also reset your phone’s Bluetooth settings.
Then retry.

Single Mode Pairing - connecting one earbud
to device.
Step 0. Before you begin, ensure earbud is powered o.
Step 1. Enter Pairing Mode for one earbud
1.1 Hold the single earbud near your ear and
long-press the earbud for about 5s until you hear a
“Pairing” voice prompt. (You will rst hear "Power On"
followed by "Pairing" a few seconds later.)
1.2 After a moment, your earbud will begin to ash
red and blue repeatedly. This mean your earbud is
now discoverable and ready to pair to your device.
Continue to next page ->
:05
L / R

Step 2. Go to Bluetooth settings on your device and
select "Selkie - Brooklyn" from the list of discovered
Bluetooth devices.
Step 3 (optional). Switching to Dual Mode
3.1 If you currently only have one earbud paired to
your device (single mode) and want to connect the
other earbud so they become dual mode, simply just
power on the other earbud and the two earbuds will
automatically sync up and both be ready for use.
Step 4. After the initial pairing, earbuds will
automatically reconnect to your last device when
powered on.
Tip:
* In Step 1.1, make sure you long-press the earbud
until you hear "Pairing". Don’t let go of the button
when you hear “Power On”! If you let go, you’ll end up
just turning on the earbud and not get to pairing mode.

Power On / O Earbuds.
Step 1. Hold earbuds near your ears and long-press
earbuds for about 5s until you hear a "Power O"
voice prompt.
The earbud’s LED will turn red briey then power o.
Note:
* If you place earbuds into the charging case, they
will automatically turn o.
* If you are in dual mode and turn one earbud o, the
other earbud will also turn o.
:05
L R

How to Wear Earbuds
Step 1. With the earbuds upright (left/right
markings facing up), insert earbuds into ear canal.
Step 2. Then twist earbuds towards you until they
are at about an 45-60° angle as shown.
This ensures a secure and comfortable t.

Single Click
Long Press (2 sec)
Single Click
Double Click
Power Button Functions.
Call Functions*
Answer / End Call
Reject Call
Music Functions
Play / Resume Music
Skip Track
*For safety reasons, audio only plays in the
right earbud during phone calls. This is meant
to keep you aware of your surrounding
(such as when driving).

Earbud LED Indicator (when in use).
Light indicates various status of the
earbuds when in use
Paired to Device / In Use
(Blinking Blue)
Low Power
(Blinking Red)
In Pairing Mode
(Blinking Blue + Red)

Earbud LED Indicator (when in case).
Light indicates charge status of
earbuds when in the case.
Fully Charged
(Solid Blue to O)
Charging
(Solid Red)

Case LED Indicator.
Light indicates charge status of
the case
Fully Charged
(4 Solid Blue)
Charging
(Blinking Blue)

Specications.
4 hrs continuous play
1 hr charge time (0 to 100%)
30 ft (10 m) wireless range
Bluetooth v4.2
Sweat Resistant
Battery Capacity: 45mAh

Warranty.
Your Selkie hardware product is protected
against defects in materials and workmanship
with a lifetime warranty from the date of purchase
when used in accordance with Selkie’s
user manuals.
To validate your lifetime warranty, please register
your product at myselkie.com/warranty.

GET IN TOUCH
We’re here. How can we help?
Contact us anytime via email
or live chat us from 10-6pm ET.
[e-mail]
myselkie.com/support
@myselkieocial
www.myselkie.com