SEMAK WB08 Installation and operation manual

SEMAK HOT WATER URNS –MODELS WB08, WB10, WB20, WB30
SEMAK AUSTRALIA:FACTORY 18, 87-91 HALLAM SOUTH ROAD,HALLAM VIC 3803
PH [phone] FAX [phone] WEB WWW.SEMAK.COM.AU
OPERATION AND WARRANTY BOOKLET

Page | 2
Table of Contents
General Safety Instructions for All Semak Products............................................. 4
Safety Instructions ............................................................................................... 5
Operating Instructions for the Semak Hot Water Urn ......................................... 5
Cleaning Instructions for the Semak Hot Water Urn............................................ 6
Safety Features .................................................................................................... 6
Specifications....................................................................................................... 6
Service & Maintenance........................................................................................ 7
Spare Parts........................................................................................................... 7
Electrical Compliance........................................................................................... 7
Warranty.............................................................................................................. 7
WARRANTY REGISTRATION.................................................................................. 9

Page | 3
RETAIN THESE SAFETY INSTRUCTIONS

Page | 4
General Safety Instructions for All Semak Products
Do not use the appliance for other than its intended use.
Never leave the appliance unattended when in use.
The appliance should not be used by children or infirm persons and close
supervision is necessary when used near such persons.
Always switch off at power outlet before removing the plug. Remove by holding
the plug –do not pull the cord.
When the appliance is not in use or prior to cleaning, always switch off the
power and remove the plug.
To avoid the risk of electric shock, do not immerse the plug, cord or any part of
the appliance in water or any other liquid.
Do not use near a stove or heat source and do not let the cord come in contact
with any hot surface.
Do not use the appliance with an extension cord unless that cord has been
checked and tested by a qualified technician or if it is an extension cord that has
been manufactured by a reliable electrical goods manufacturer and has not
been altered in any way.
Do not operate any appliance with a damaged cord or plug, or after the
appliance malfunctions or has been dropped or damaged in anyway. Return to
Semak or an authorised service agent for repair.
CAUTION Hot Surfaces.
NEVER leave the appliance turned ON unattended. ALWAYS unplug the cooker
after use.

Page | 5
Safety Instructions
Only use appliance on a flat, level and stable surface. DO NOT use on wet surface
When in operation the surfaces of the urn are HOT
The contents of the urn are very HOT. Be careful not to splatter the contents when
pouring to avoid burns. Steam will be expired when the lid is lifted and care needs
to be taken that the lid is lifted in a way to avoid steam burns of the wrists/hands
DO NOT touch the heating element while the machine is in operation.
ALWAYS turn off the appliance and allow it to cool down before cleaning.
Use a barely damp cloth to wipe the machine once it has cooled.
DO NOT use caustic substances to clean the warmer and do not allow caustic
substances to make contact with any electrical components of the warmer.
WARNING –This appliance should be used according to the instructions.
MISUSE of this appliance will cause HAZARD.
Operating Instructions for the Semak Hot Water Urn
1. Make sure that the knob is in the “OFF” position.
2. Plug into an earthed 240V AC power supply.
3. Fill the vessel with water to the desired level using the water level indicator as a
guide.
4. Turn the switch knob to the desired temperature.
5. The urn will switch down the temperature and the “keep warm” light will come
on.
6. When the urn requires additional water, add the water and turn the knob to
the desired temperature and allow the contents to boil.
7. The urn has boil dry protection, however ensure that the urn is turned off when
NOT in use. Always ensure that locking lid is in place and correctly sealed.
8. DO NOT run the urn when empty. The heating time will vary depending on the
volume of water within.
9. When finished heating turn the switch to the “off” position.
10. Clean the appliance with a damp cloth.
11. NEVER leave the warmer on unattended. ALWAYS unplug the warmer after use.

Page | 6
Cleaning Instructions for the Semak Hot Water Urn
1. ALWAYS turn off the appliance and allow it to cool down before cleaning.
2. Use a barely damp cloth to wipe the machine once it has cooled.
3. To clean the inside surface of mineral build up, use 1 tablespoon full of Urn
Cleaner to a full container of cold water, then boil the contents and wait until
the deposits have been dissolved. Empty contents, rinse and fill with fresh cold
water, boil and use.
4. DO NOT hose out the inside of machine. Wipe the interior with a damp cloth.
5. DO NOT use caustic substances to clean the warmer and do not allow caustic
substances to make contact with any electrical components of the warmer.
Safety Features
Semak Hot Water Urns are fitted with the following safety features:
Lock on lid to avoid accidental scalding
Double Skinned –warm to touch
Boil Dry Protected
Specifications
Model
WB08
WB10
WB20
WB30
Capacity (Lt)
8.8
10
20
30
Cups
40
45
90
135
Diameter (mm)
225
225
270
270
Height (mm)
440
470
510
600
Electrical (W)
950
1650
1650
1650

Page | 7
Service & Maintenance
The Semak Hot Water Urn does not contain user-serviceable parts. For Service and Repair,
contact Semak for your nearest Authorised Service Agent
The Foodservice Industry is deemed a hostile environment within the scope of AS/NZS
3760:2003. Semak Hot Water Urn MUST be routinely electrically tested for compliance with
this standard if used commercially.
It is recommended that a Food Safety program such as HACCP be employed and that
routine service and repair be undertaken at the time of electrical testing to ensure the
correct operation and function of all parts.
Spare Parts
Spare Parts, exploded views and wiring diagrams are available from our webpage. Go to
www.semak.com.au and locate the appliance in the product section for the above
information.
Electrical Compliance
Semak Hot Water Urns comply with the following electrical standards
CISPR 14
Warranty
The Semak Hot Water Urn is a Commercial appliance. This product is guaranteed for 1 Year
from the date of purchase against mechanical and electrical defects. If the fault is deemed
caused by MISUSE/ABUSE the terms of the warranty are invalidated. If the product has
been opened or tampered with (ie. In an attempt to repair it) the warranty is invalidated.
All warranty repairs should be undertaken by Semak
It is against company policy to authorize warranty repairs over the phone. Service Agents
will require a work order number from Semak to conduct warranty repairs.

Page | 8
SEMAKWARRANTY
THIS WARRANTY APPLIES ONLY TO PRODUCTS MANUFACTURED AND SOLD IN AUSTRALIA
The benefits conferred by this warranty are an alternative to all other rights and remedies
in respect of the product which the consumer has under the Trade Practices Act and similar
State and Territory Laws.
Semak Australia. Warrant each new SEMAK appliance manufactured by SEMAK to be free
from defects in materials or manufacturing process for a period of 2 years from the date of
original purchase.
Should defects due to faulty materials or manufacturing process develop within the
warranty period, the appliance will be repaired without charge providing all conditions of
this warranty are observed.
1. Proof of Purchase and Warranty card must be retained and available on request.
2. This Warranty is void if the equipment has been damaged due to misuses neglect or is
used for a purpose for which it was not suited; and no repairs, alterations or
modifications have been attempted by other than Semak or its authorised Service
Agent.
3. Semak Australia. Reserves the right to reject a claim for warranty if service is required
due to misapplication, improper installation, inadequate wiring, and incorrect voltage
conditions. Under no circumstances shall SEMAK or its agents bear responsibility for
consequential damages of any kind.
4. Where required by Statute or local authority, equipment must be installed by qualified
person in accordance with all relevant regulations. Failure to do this will void product
warranty.
5. Cost of transport of any appliance or part to and from SEMAK or its Service Agent is to
be paid by the owner.
6. A charge will be made where failure is due to neglect, abuse or accidental damage on
the part of the operator, or when no fault can be found or the fault is due to causes
outside the control of Semak Australia.
7. The above does not preclude the purchaser from their Statutory rights as a consumer.
Semak Australia
Factory 18
87-91 Hallam South Road
HALLAM VIC 3803
Ph 61 3 9796 4583
Fax [phone]
Email techn[email protected]

Page | 9
WARRANTY REGISTRATION
Retain for Future Reference
DO NOT SEND
Please complete one registration for each Semak appliance.
You may be required to provide this information when requesting after sales service. Please
staple your proof of purchase to this page.
Company Name: ________________________________________________
Company Address: ________________________________________________
Business Type: ________________________________________________
Contact: ________________________________________________
Phone: ________________________________________________
Fax: ________________________________________________
Email: ________________________________________________
Product: ________________________________________________
Serial Number: ________________________________________________
Date of Purchase: ________________________________________________
Place of Purchase: ________________________________________________

Page | 10
Copyright Semak Australia 2010