Sencor SCH 450 User manual
Car adapter
EN Usermanual
■
SCH 450
Autoadaptér
CZ ■Uživatelská příručka
Autoadaptér
SK ■Používateľská príručka
Gépkocsi-adapter
HU ■Felhasználói kézikönyv
Zasilacz samochodowy
PL ■Instrukcja obsługi
EN
EN 3
2021 05/2021
Package contents / Device description
1. Supply content
Car adapter
Two-sided adhesive tapes
User'smanual
2. Device description
A Input from 12V - 24V car socket
B Outputs: 3x car socket; 4x USB-Ato power portable devices
1 Mechanical on/off button
2 Display - showing the car on-board voltage
3 12V - 24V car socket
4 USB-A- 5V/2.4A
5 USB-A- 5V/1 A
EN
4 EN
2021 05/2021
Putting into operation / USB sockets / Car sockets / Safety fuse
3. Putting into operation
Before use, make sure that your car’son-board voltage matches the product
specifications. Connect the device “A” part to your car socket. Attach the
device “B” part to alocation in your car where it will not pose danger do
driving and will not become loose and cause injury to people in case of an
impact. Two-sided adhesive tapes to fix the device are included in package.
Press the on/off button to turn on the USB sockets and car adapters at the
rear of the “B” device. The display will show the on-board system voltage
level.
After each trip, always turn the device off with the on/off button. This will
prevent the battery from being drained when the engine is turned off.
4. USB sockets
The car adapter incorporated four USB type Asockets - two of them are
located on the top and two on the side.
The “4” - 5V / 2,4A ports are suitable for charging devices with higher
power demands such as tablets, power banks and smart phones.
The “5” - 5V / 1A ports are suitable for charging basic, low-power devices
such as MP players, flashlights and watches.
5. Car sockets
With this adapter, you can add up to three sockets to your existing car
socket. Before loading all car sockets simultaneously, make sure that the
total current drawn by all appliances (including those connected in the USB
sockets) does not exceed the technical specified value.
6. Fuse
The fuse is located inside the device. If the specified value at the device
output is exceeded, the fuse will irreversibly cut off and the device will stop
working. In such case, please contact an authorised service centre.
EN
EN 5
2021 05/2021
Technical specifications
7. Technical specifications
Charging and power supply
4x USB-Aoutput
3x 12V output
Specifications
2x USB-A- 5V/2.4A
2x USB-A- 5V/1A
DC 12V - 120W max. / DC 24V - 200W max.
Maximum USB output current 5V / 4A (simultaneously)
Display
Battery voltage indicator (9V - 30V)
Warning indication (flashing display)
Others
8A embedded one-time fuse
Short-circuit, overvoltage and overcurrent protection
Power cord length: 1m
EN
6 EN
2021 05/2021
INSTRUCTIONS AND INFORMATION ON DISPOSING OF USED PACKAGING
MATERIALS
Dispose of used packaging material at a site designated for waste in your
municipality.
DISPOSING OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT
This symbol on products or original documents means that used
electric or electronic products must not be added to ordinary
municipal waste. For proper disposal and recycling, take these
products to designated collection points. Or in some European Union
states or other European countries the products can be returned to
the local retailer when buying an equivalent new product. Disposing
of this product correctly helps save valuable natural resources and
prevents damage to the environment by improper waste disposal.
Ask your local authorities or collection facility for more details. In
accordance with national regulations penalties may be imposed for
the incorrect disposal of this type of waste.
For business entities in European Union states
If you want to dispose of electric or electronic devices, ask your
retailer or supplier for the necessary information.
Disposal in other countries outside the European Union
This symbol is valid in the European Union. If you wish to dispose
of this product, request the necessary information about the correct
disposal method from the local council or from your retailer.
This product meets all the basic requirements of the applicable EU
directives.
The text, design and technical specifications may be changed without prior
notice and we reserve the right to make these changes.
Manufacturer’s address: FAST ČR, a.s., U Sanitasu 1621, Říčany, Czech
Republic. The original version is in the Czech language.
EN
EN 7
2021 05/2021
EN Warranty conditions
Warranty card is not apart of the device packaging.
This product is warranted for the period of 24 months from the date of purchase to the end-user. Warranty is limited
to the following conditions. Warranty is referred only to the customer goods using for common domestic use. The
claim for service can be applied either at dealer’sshop where the product was bought, or at below mentioned
authorized service shops. The end-user is obligated to set up aclaim immediately when the defects appeared but
only till the end of warranty period. The end user is obligated to cooperate to certify the claiming defects. Only
completed and clean (according to hygienic standards) product will be accepted. In case of eligible warranty claim
the warranty period will be prolonged by the period from the date of claim application till the date of taking over
the product by end-user, or the date the end-user is obligated to take it over. To obtain the service under this
warranty, end-user is obligated to certify his claim with duly completed following documents: receipt, certificate of
warranty, certificate of installation.
This warranty is void especially if apply as follows:
Defects which were put on sale.
Wear-out or damage caused by common use.
The product was damaged by unprofessional or wrong installation, used in contrary to the applicable instruction
manual, used in contrary to legal enactment and common process of use or used for another purpose which
has been designed for.
The product was damaged by uncared-for or insufficient maintenance.
The product was damaged by dirt, accident of force majeure (natural disaster, fire, and flood).
Defects on functionality caused by low duality of signal, electromagnetic field interference etc.
The product was mechanically damaged (e.g. broken button, fall).
Damage caused by use of unsuitable media, fillings, expendable supplies (batteries) or by unsuitable working
conditions (e.g. high temperatures, high humidity, quakes).
Repair, modification or other failure action to the product by unauthorized person.
End-user did not prove enough his right to claim (time and place of purchase).
Data on presented documents differs from data on products.
Cases when the claiming product cannot be indentified according to the presented documents (e.g. the serial
number or the warranty seal has been damaged).
Authorized service centers
Visit www.sencor. for detailed information about authorized service centers.com
Table of contents
Other Sencor Adapter manuals
