Sengled Snap AS02-PAR38NAE26 User manual

Snap AS02-PAR38NAE26 LED Bulb
User Manual
Outdoor HD Security Camera
with LED Floodlight

Features
•
•
•
•
•
•
•
•
•
Product Specifications
Video & Audio
Resolution: Up to 1080P(1920 x 1080), H.264 encoding
Field of view: 140° Ultra wide angle
Image sensor: 1/2.7" Progressive scan CMOS
Night Vision: 850nm Infrared LEDs, illuminates up to 35 feet
Audio: Speaker & Microphone
Lighting
Bulb Socket / type:E26 / PAR-38
Brightness / Color temperature / Angle:850 lm / 3000K / 36°
LED lifetime:25,000 hours
Wireless
Frequency:2.4 GHz
Encryption: WEP/WPA/WPA2
Range:300 feet line of sight
General
Video storage: Sengled cloud storage system
Power: 100-120V AC 50/60Hz
Operating Temperature: -20°~+40°C/-4°F~+104°F
Ingress Protection:IP54 and 100% U.V.protection
Color: White
Dimension: 5.7in(H)x 4.8in(Dia.)
•
•
•
•
•
Box Contents
One Snap AS01-PAR38 Bulb
Quick Start Guide
User Manual
Limited Written Express Warranty
One Pendant Light Holder
One Ethernet Cable
One Screwdriver
Simply installation, and no wires required
1080P High-Quality live stream & recording
Advanced motion detection &
instant alerts
Weatherproof for outdoor usage
2-way audio intercom
Automatic night vision
Smart lighting control
FREE 24hrs continues cloud recording and optional paid plans
•
•
•
•
•
•
•
EN
•
•
•
•
•
•
•
•
•
•
•
•

Snap Components
Factory Reset：
Open the interfaces cover, press and hold the reset
button until the LED light blinks and indicator light turns
red.
EN
Weight: 1.3lb/604g (approx.)
Certifications: UL,CUL,FCC, IC ,LM-79
•
•

•
•
•
•
•
•
•
•
ATTENTION
ADDED WEIGHT OF THE DEVICE MAY CAUSE INSTABILITY OF A FREE-STANDING
PORTABLE LUMINAIRE.
THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXITS.
DO NOT USE WITH DIMMERS.
SNAP BULBS REQUIRE CONSTANT POWER TO OPERATE.
FIXTURES WITH MOTION SENSORS MAY STOP THE FLOW OF ELECTRICITY
TO THE SOCKET. EITHER CHANGE THE FIXTURE OR MODIFY THE EXISTING
FIXTURE TO ALLOW FOR A CONSTANT FLOW OF ELECTRICITY TO THE
BULB.
THE EFFECTIVE RANGE OF YOUR WI-FI ROUTER MAY NOT BE SUFFICIENT.
TO REACH THE SNAP BULB. A WI-FI EXTENDER MAY BE REQUIRED TO
INCREASE THE RANGE OF YOUR WI-FI NETWORK.
IN CANADA, THE DEVICE IS RESTRICTED TO INDOOR OPERATION ONLY IN
THE BAND 5150-5250 MHZ.
VISIT SENGLED.COM FOR MORE INFORMATION AND CUSTOMER SUPPORT.
Federal Communications Commission (FCC)
Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generate, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment.
EN
No Dimmers No Motion Sensors No Weak Wi-Fi

© 2016 Sengled, Incorporated. All rights reserved. Sengled Snap is a trademark of
Sengled, Incorporated, registered in the United States and other countries.
Specifications are subject to change without notice. Other trademarks and trade
names are the property of their respective owners.
RF exposure warning
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment must be installed and operated in accordance with provided
instructions and the antenna(s) used for this transmitter must be installed to provide
a separation distance of at least 20 cm from all persons and must not be collocated
or operating in conjunction with any other antenna or transmitter.
IC Radiation Exposure Statement for Canada
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
causeinterference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate
using anantenna of a type and maximum (or lesser) gain approved for the
transmitter byIndustry Canada. To reduce potential radio interference to other
users, the antennatype and its gain should be so chosen that the equivalent is
otropically radiated power(e.i.r.p.) is not more than that necessary for successful
communication.
User manuals for transmitters equipped with detachable antennas shall also
containthe followingnotice in a conspicuous location:
This radio transmitter (identify the device by certification number, or model
number ifCategory II) has been approved by Industry Canada to operate with
the antennatypes listed below with the maximum permissible gain and
required antennaimpedance for each antenna type indicated. Antenna types
not included in this list,having a gain greater than the maximum gain indicated
for that type, are strictlyprohibited for use with this device.
IMPORTANT NOTE:
Radiation ExposureStatement:
This equipment complies with “Industry Canada RSS-102 for radiation exposure
limitsset forth for an uncontrolled environment”.
This equipment should be installed and operated with minimum distance
20cmbetween the radiator and your body.
EN

© 2016 Sengled, Incorporated. All rights reserved.
www.sengled.com
Rev 1.0 2016.07