Senix BLVE12-M User manual

8458-A072012001-001
12 Amp Motor
Electric Blower Vacuum
For customer support, please call 1-800-261-3981 or send email to:
[email protected]
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Operator’s manual
Model : BLVE12-M

2WWW.SENIXTOOLS.COM
SPECIFICATIONS*
SAFETYSYMBOLS.................................................................2
TECHNICAL DATA..................................................................2
SAFETY...................................................................................3
COMPONENT LOCATION......................................................6
ASSEMBLY...............................................................................7
OPERATION..........................................................................10
MAINTENANCE.....................................................................12
PARTS....................................................................................13
TROUBLESHOOTING...........................................................15
WARRANTY...........................................................................16
To reduce the risk of injury, user must
read instruction manual.
Wear ear protection.
Wear eye protection.
Wear dust mask.
Wear hand protection.
Wear non-slip safety footwear.
Avoid power lines, use in dry conditions.
TABLE OF CONTENTS
Do not expose to rain.
Thrown objects can ricochet and result in
personal injury or property damage.
Keep all bystanders at least 50 ft. away.
Indicates danger, warning or caution.
Precautions that involve your safety.
Disconnect from the mains plug if the cord
is damaged or entangled. DO NOT TOUCH
THE CORD BEFORE DISCONNECTING
THE SUPPLY.
Model BLVE12-M
Rated Voltage 120V ~60Hz
Rated Current 12A
Motor Type Universal Motor
No Load Speed 14000 /min
Max Air Speed 179 MPH
Max Air Volume 420 CFM
Mulch Ratio 14:1
Bag Capacity 1.24 Bushel
Weight 9.0lbs(4.1kg)
SAFETY SYMBOLS

3WWW.SENIXTOOLS.COM
1. Work area safety
a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose
control.
2. Electrical safety
a) Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodied
plugs and matching outlets will reduce risk of electric
shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk
of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of
electric shock.
f) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
3. Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under the
inuence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result
in serious personal injury.
b) Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal
injuries.
Read all safety warnings and all instructions. Failure
to follow the warnings and instructions may result in
electric shock, re and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
GENERAL SAFETY RULES
WARNING:
c) Prevent unintentional starting. Ensure the switch is
in the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your nger on the switch or
energising power tools that have the switch on invites
accidents.
d) Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached
to a rotating part of the power tool may result in
personal injury.
e) Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
g) If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
4. Power tool use and care
a) Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
b) Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
5. Service
a) Have your power tool serviced by a qualied repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained
SAFETY

4WWW.SENIXTOOLS.COM
• Do not tough the rotating parts inside the machine!
The rotating parts can result in serious personal injury.
• This appliance is not intended for use by children and
persons with physical, sensory or mental limitations or
a lack of experience or knowledge.
• Keep children, bystanders and pets away while
operating a power tool. Distractions can cause you to
lose control. They could also be injured by ying dusts
or debris.
• Do not operate the machine near open windows, etc.
• Do not overreach and to keep the balance at all times.
Always be sure of the footing on slopes. Walk when
operating the power tool, never run.
• Do not touch moving hazardous parts before the
battery pack is removed and the moving hazardous
parts have come to a complete stop.
• Always wear eye and ear protection. This kind of
machine is extremely noisy and can blow dusts
and debris up in the air. Wear protective mask if
necessary. Dress properly, do not wear loose clothing
or jewelry that could become caught in moving parts
of the unit. Safe, sturdy, nonskid footwear should
always be worn. Long hair should be tied back.
• To reduce the risk of disconnection of the appliance
cord from the extension cord during operating, secure
the extension cord to the appliance plug as described
in the Operating Manual.
• Do not using the machine in bad weather conditions
especially when there is a risk of lightning.
• Inspect the area to be blown and remove any foreign
objects.
• Do not put the motor near to debris or down to the
ground before the motor stop running completely.
The debris or small particles can be sucked into the
machine through the air inlet grids and thrown out
from the air tube!
• This tool has been designed for blowing/collecting as
well as vacuuming/shredding dry leaves and other dry
garden rubbish, such as grass and twigs.
• When operating the unit as a blower, never point the
blower nozzle in the direction of people or pets or
in the direction of windows. Use extra caution when
blowing debris near solid objects, such as trees,
automobiles and walls.
• Be sure to secure the unit when transporting it.
• Never douse or squirt the unit with water or any other
liquid.
• Clean the unit after each use as described in the
cleaning and storage section.
To reduce the impact of noise and vibration emission,
limit the time of operation, use low-vibration and low-
noise operating modes as well as wear personal
protective equipment.
Take the following points into account to minimize the
vibration and noise exposure risks:
1. Only use the product as intended by its design and
these instructions.
2. Ensure that the product is in good condition and well
maintained.
Familiarize yourself with the use of this product by
means of this instruction manual. Memorize the safety
directions and follow them to the letter. This will help to
prevent risks and hazards.
1. Always be alert when using this product, so that
you can recognize and handle risks early. Fast
intervention can prevent serious injury and damage
to property.
2. Switch off the product and disconnect the power
supply if there are malfunctions. Have the product
checked by a qualied professional and repaired, if
necessary, before you operate it again.
Even if you are operating this product in accordance
with all the safety requirements, potential risks of injury
and damage remain. The following dangers can arise in
connection with the structure and design of this product:
3. Health defects resulting from vibration emission if the
product is being used over long periods of time or not
adequately managed and properly maintained.
4. Injuries and damage to property due to broken parts
or the sudden impact of hidden objects during use.
5. Prolonged use of this product expose the operator
to vibrations and may produce ‘whitenger’ disease.
In order to reduce the risk, please wear gloves and
keep your hands warm. If any of the ‘whitenger’
symptoms appear, seek medical advice immediately.
‘Whitenger’ symptoms include: numbness, loss
of feeling, tingling, pricking, pain, loss of strength,
changes in skin colour or condition. These symptoms
normally appear in the ngers, hands or wrists. The
risk increases at low temperatures.
SPECIFIC SAFETY RULES
VIBRATION AND NOISE REDUCTION
EMERGENCY
RESIDUAL RISKS
3. Use correct attachments for the product and ensure
they are in good condition.
4. Keep tight grip on the handles/gripping surface.
5. Maintain this product in accordance with these
instructions and keep it well lubricated (where
appropriate).
6. Plan your work schedule to spread any high vibration
tool use across a longer period of time.
7. Prolonged use of the product exposes the user
to vibrations that can cause a range of conditions
collectively known as hand-arm vibration syndrome
(HAVS) e.g. ngers going white; as well as specic
diseases such as carpal tunnel syndrome.
• To reduce this risk when using the product, always
wear protective gloves and keep your hands warm.
The symptoms of HAVS include any combination of
the following: Tingling and numbness in the ngers;
Not being able to feel things properly; Loss of strength
in the hands; Fingers going white (blanching) and
becoming red and painful on recovery (particularly in
the cold and wet, and probably only in the tips at rst).
Seek medical advice immediately if such symptoms are
experienced.

5WWW.SENIXTOOLS.COM
WARNING:
WARNING:
This product produces an electromagnetic eld during
operation! This eld may under some circumstances
interfere with active or passive medical implants! To
reduce the risk of serious or fatal injury, we recommend
persons with medical implants to consult their doctor
and the medical implant manufacturer before operating
this product!
Do not permit ngers to touch the terminals of plug
when installing or removing the extension cord from the
plug.
Use a proper extension cord. ONLY use cords listed
by underwriters Laboratories (UL). Other extension
cords can cause a drop in line voltage, resulting in a
loss of power and overheating of tool. For this tool an
AWG (American Wire Gauge) size of a least 14-gauge
is recommended for an extension cord of 25-ft. or less
in length. Use 12-gauge for an extension cord of 50-ft.
Extension cords 100-ft. or longer are not recommended.
Remember, a smaller wire gauge size has greater
capacity than a larger number (14-gauge wire has more
capacity than 16-gauge wire; 12-gauge wire has more
capacity than 14-gauge). When in doubt use the smaller
number.
1. Double insulated tools are equipped with a polarized
plug (one blade is wider than the other and will
require the use of a polarized extension cord. The
Pole Saw’s plug will t into a polarized extension
cord only one way. If the plug does not t fully into
the extension cord, reverse the plug. If the plug still
does not t, obtain a correct polarized extension
cord. A polarized extension cord will require the use
of a polarized wall outlet. This plug will t into the
polarized wall outlet only one way. If the plug does
not t fully into the wall outlet, reverse the plug. If the
plug still does not t, contact a qualied electrician
to install the proper outlet. Do not change or alter
the equipment plug, extension cord receptacle, or
extension cord plug in any way.
2. Double insulation eliminates the need for the three-
wire grounded power cord and grounded power
supply system. Applicable only to Class II (double-
insulated) tools.
ELECTRICAL SAFETY
EXTENSION CORDS
SAVE THESE INSTRUCTIONS
CAUTION:
WARNING:
Minimum gauge for extension cords
Ampere Rating
Volts Total length of cord in feet
More than/Not more than AWG
120 V 25 50 100 150
0-6
6-10
10-12
18
18
16
16
16
16
16
14
14
14
12
12
12-16 14 12 Not recommended
Securing extension cord
Keep the extension cord clear of the work area. Position
the cord so that it will not get caught on bushes,
hedges, tree trunks, lawnmowers or other obstructions
while you are working with the pole saw.
Check extension cords before each use. If damaged
replace immediately. Never use tool with a damaged
cord since touching the damaged area could cause
electrical shock, resulting in serious injury.

6WWW.SENIXTOOLS.COM
KNOW YOUR Blower/Vacuum/Mulcher
COMPONENT LOCATION
5
6
7
8
4
3
2
1
9
12
10
11
1 Handle 5 Lock knob
2 ON/OFF switch 6 Vacuum inlet cover
3 Auxiliary handle 7 Blower tube
4 Plug 8 Blower concentrator nozzle
9 Auxiliary handle 11 Rear vacuum/mulcher tube
10 Front vacuum/mulcher tube 12 Collective bag

7WWW.SENIXTOOLS.COM
ASSEMBLY
WARNING:
Read the ENTIRE IMPORTANT SAFETY
INFORMATION section at the beginning of this manual
including all text under subheading therein before set up
or use of this product.
ASSEMBLE AS A BLOWER
ASSEMBLE AS A VACUUM/MULCHER
1. Slide the blower tube forward until the notched area
on the blower housing clicks into the slot on the
blower tube.
2. Insert the concentrator nozzle onto the end of the
blower tube until it locks into position (Fig. 1).
1. Slide the front and rear vacuum/mulcher tubes
together until the lock button engages (Fig. 5).
NOTE: The concentrator nozzle is used to increase air
ow in tight areas (i.e around ower beds, under decks,
etc.).
3. Before using the blower function, rotate the lock knob
to lock the cover in place(The indicator will be on the
far right position,Fig. 2).
4. To remove the blower tube, turn the ON/OFF power
switch to the OFF (O) position and disconnect the
tool from the power supply (Fig. 3).
5. Press the tube release button and remove the blower
tube (Fig. 4).
ON
OFF
Notched area
Concentrator
nozzle
Air outlet
Blower tube
Fig. 1
Lock knob
Fig. 2
Fig. 3
Tube release button Fig. 4
Fig. 5
Rear tube
Front tube

8WWW.SENIXTOOLS.COM
2. Rotate the lock knob to unlock the cover (The
indicator is on the far left position,Fig. 6).
5. Insert the collection bag adaptor into the blower air
outlet until the collection bag is securely fastened
(Fig. 9), then make the bag hook the strap holder on
the two sides of the tube (Fig. 10).
3. With the blower tube removed, insert the "hooked"
Side end of the mulcher tube into the rear clip on the
unit. Rotate the lock knob to close the front tube (The
indicator is on the far right position,Fig. 7).
1. To remove the collective bag ,release the bag from
the strap holder on the two sides of the tube,and
simply press the tube release button to remove the
bag (Fig. 11).
2. To remove the vacuum/mulcher tube assembly,
release the inter cover from the hook of the tube,
rotate the lock knob to unlock , then remove the tube
assembly from its housing (Fig. 12).
4. Make the inter cover hook the hook of the rear tube
(Fig. 8).
Fig. 6
Fig. 9
Fig. 7
Rear clip + Hook side
Fig. 8
1 2 3
Fig. 10
Fig. 11
Tube release button
1
2

9WWW.SENIXTOOLS.COM
8. Make sure to disconnect the unit from the power
supply before attempting to clear any obstructions.
The indicator of the lock knob must be entered into
black area rst, then the machine can be running(Fig.
13).
NOTE: It may be necessary to remove the blower tube
or vacuum/mulcher tubes to clear a blocked tube or
impeller.
1
2
Fig. 12
Fig. 13

10 WWW.SENIXTOOLS.COM
OPERATION
WARNING:
WARNING:
WARNING:
WARNING:
Read the ENTIRE IMPORTANT SAFETY
INFORMATION section at the beginning of this manual
including all text under subheading therein before set up
or use of this product.
Use the blower/vacuum/mulcher only in daylight or good
articial light.
To avoid serious personal injury, wear ear defenders,
goggles or safety glasses at all times when operating
this unit. Wear a face mask or dust mask in dusty
locations.
To prevent serious personal injury or damage to the
unit, make sure the blower tube or the mulcher tubes
and the bag are in place before operating the unit.
• When using the blower vac, plant your feet rmly on
the ground and place one hand on the unit handle and
the other hand on the auxiliary handle.
• Wear personal protective equipment during your work
session. This includes boots, safety glasses/goggles,
ear defenders, long pants and a long-sleeve shirt.
• When using the unit as mulcher, make sure the bag is
properly installed and zipped closed.
• Make sure the blower tube nozzle is not directed at
anybody or any loose debris before starting the unit.
• Verify that the unit is in good working condition. Make
sure the tubes and guards are in place and secure.
• Ensure that the vacuum/mulch inlet cover is
completely closed and locked.
• Keep a rm grip on both the front and rear handle or
grips.
• To reduce the risk of hearing loss associated with
soundlevel(s), hearing protection is required.
• Use the shoulder strap when using the unit as a
mulcher.
• Operate power equipment only at reasonable hours—
not early in the morning or late at night when people
might be disturbed. Comply with times listed in local
ordinances.Usual recommendations are 9:00 am to
5:00 pm, Monday through Saturday.
• To reduce noise levels, limit the number of pieces of
power equipment used at any one time and operate
power blowers at the lowest possible speed setting
necessary to do the job.
• Use rakes and brooms to loosen debris before
blowing.
• In dusty conditions, slightly dampen surfaces.
• Conserve water by using power blowers instead
of hoses for many lawn and garden applications,
including areas such as gutters, screens, patios, grills,
porches and gardens.
• Blow debris into a safe, open area away from children,
pets, open windows or freshly washed cars.
• Clean up after using leaf blowers and other lawn
equipment. Dispose of debris appropriately.
CONNECTING TO A PWER SOURCE
OPERATING TIPS
STARTING AND STOPPING
1. Secure the extension cord to the motor housing using
the cord retainer located at the rear of the blower.
Securing the extension cord in this manner prevents
accidental removal of the electrical cord during
operation (Fig. 14).
1. To start the electric blower/vacuum/mulcher, slide the
ON/OFF switch to position (1),This unit is equipped
with one speed settings (1 ) (Fig. 15).
2. To stop the unit, slide the ON/OFF switch to position
(0) (Fig. 15).
2. Plug the female end of the electrical cord into the
receptacle at the back of the unit.
Fig. 14
ON
OFF
Fig. 15

11WWW.SENIXTOOLS.COM
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
To avoid serious personal injury, do not wear loose
tting clothing or articles such as scarves, strings,
chains, ties, etc., that could get drawn into the air vents.
To make sure long hair does not get drawn into the air
vents, tie back long hair.
Never remove the collection bag without rst turning the
power switch to the OFF (0) position and unplugging the
unit from the main power source.
Do not use in vacuum/mulcher mode without the
vacuum tubes and collection bag in place.
To avoid serious personal injury, be sure the unit is OFF
and unplugged before clearing the impeller.
To avoid serious personal injury, always wear gloves to
protect yourself from the impeller blades or other sharp
objects.
During the vacuuming process, certain objects such as
cloth, rope or large diameter sticks may obstruct the fan
and block the motor. A thermal protection device, which
is built into the blower vac, will cut off the electricity to
the motor to prevent damage from overheating.
In the event an obstruction occurs and power is
curtailed:
Never cover air vents. Keep them free from obstructions
and debris. They must always remain clear for proper
motor cooling.
Hold the blower rmly with one hand on the main
handle and the other hand on the auxiliary handle.
Sweep from side to side with the nozzle several inches
above the ground or oor (Fig. 16).
Slowly advance the unit, keeping the accumulated pile
of debris in front of you. Most dry blowing operations
are better suited to low speeds rather than high speeds.
High speed blowing is best for moving heavier items like
large debris or gravel.
• Once you have blown the debris/leaves into a pile, you
can convert to vacuum mode to collect the debris.
• With a rm hold on the vac, and use a sweeping
action to collect light debris. The debris will ow into
the bag. Items such as small leaves and twigs will be
mulched as they pass through the fan housing. For
longer bag life and increased performance, empty the
bag frequently
(Fig. 17).
• As the bag lls, suction power will decrease. When this
happens, turn the power switch to the OFF (0) position
and unplug the unit from the power supply. Remove
the bag and empty the debris.
• To remove the bag, press the tube release button
(Fig. 11). To empty, hold the plastic handle and grab
the nylon handle on the underside of the bag. Turn
the bag upside down and shake out any debris and
leaves.
AIR VENTS
CLEARING A BLOCKED TUBE/IMPELLER
BLOWER MODE
VACUUM/MUCHER MODE
1. Slide the ON/OFF switch down to the OFF (0)
position until the unit comes to a complete stop.
2. Unplug the unit.
3. Remove the blower tube or vacuum/mulcher tubes
and the bag.
4. Using protective gloves, carefully remove the
material blocking the tube or impeller. Inspect the
blades to ensure no damage has occurred. Rotate
the impeller blades by hand to ensure the blockage is
completely cleared.
5. Reinstall the blower tube or vacuum/mulcher tubes
and the bag.
6. Wait 3 minutes for the motor to cool.
7. Plug the unit back into the power supply and turn
the ON/OFF switch to ON (1). The blower vac will
resume normal function.
Fig. 17
Fig. 16

12 WWW.SENIXTOOLS.COM
MAINTENANCE
WARNING:
WARNING:
WARNING:
Read the ENTIRE IMPORTANT SAFETY
INFORMATION section at the beginning of this manual
including all text under subheading therein before
maintenance this product.
Disconnect the extension cord before performing any
maintenance task.
If the extension cord is plugged into the appliance,
someone could accidentally turn on the unit while you
are performing maintenance on it, which could result in
serious personal injury.
To avoid serious personal injury, always turn the unit off
and unplug it before cleaning or servicing.
Use a small brush to clean the outside of the unit. Do
not use strong detergents, household cleaners that
contain aromatic oils (e.g. pine and lemon) or harsh
solvents such as kerosene as these substances can
damage the plastic housing or the handles. Wipe off
any moisture with a soft, dry cloth.
Examine the extension cord thoroughly for signs of
excess wear or damage. If it is worn or damaged,
replace it immediately.
Disconnect the extension cord from the electric blower/
vacuum/mulcher before storing.
Store the cord with the electric blower/vacuum/mulcher
indoors in a clean, dry and locked location out of the
reach of children and animals.
Normal maintenance, replacement or repair of emission
control devices and systems may be performed by any
qualied repair establishment or individual with original
or equivalent parts. Warranty and recall repairs must
be performed by an authorized service center; please
contact customer service for assistance.
CLEANING
STORAGE
1. Empty the bag after each use to avoid deterioration
and obstructing air ow, which will reduce the
performance of the mulcher.
2. Wear eye protection and a dust mask. Clean the
bag as needed. Turn the bag inside out after initial
emptying and vigorously shake out dust and debris.
3. Wash the bag once a year, or more often if needed.
Follow the steps below:
i. Remove the bag.
ii. Turn the bag inside out.
iii. Hang it up.
iv. Hose it down thoroughly.
v. Leave it hanging to dry.
vi. Turn the bag right-side up and reinstall.
NOTE: Devices for retaining extension cords are
commercially available should you wish to purchase
one.

13WWW.SENIXTOOLS.COM
PARTS
EXPLODED VIEW
1
2
3
3-1
3-2
3-3
3-4
3-5
4-1
4-2
4
5
No. Part # Description Qty.
1202041000012 Flat Nose 1
2202054000039 Blowpipe 1
3199068000012 Dust Bag Assembly 1
3-1 202030001729 Shroud 1
3-2 202999001785 U type male terminal block 1
3-3 202154000009 Bend Tube 1
3-4 299010000031 Dust Bag 1
4 199049000033 Duct Components 1
4-1 202024002548 Handle 1
4-2 202155000033 Blowpipe 1
5 202155000034 Blowpipe 1
PARTS
For replacement parts, email: [email protected].

14 WWW.SENIXTOOLS.COM
TROUBLESHOOTING
SYMPTOM POSSIBLE CAUSE RECOMMENDED ACTIONS
Unit will not blow
or mulch
1. Bag full 1. Empty the bag.
2. Blocked tube 2. Clear the blockage.
3. Blocked impeller 3. Clear the blockage.
4. Dirty bag 4. Clean the bag.
5. Torn bag 5. Replace the bag.
6. Bag unzipped 6. Zip up the bag.
7. Unit unplugged 7. Plug into an outlet or an extension cord.
Unit will not start 1. Unit is unplugged 1. Check cord to make sure it is plugged into an
electrical outlet.
2. Power/speed switch is in the
OFF (0) position. 2. Slide the power switch to the ON (1) position
3. Defective power switch. 3. Contact Senix customer service at 1-800-261-3981.
4. Vac tubes are not correctly
installed.
4. Check vac tubes and ensure that they are correctly
installed to allow the switch to be engaged.
5. Intake gate/cover is not closed. 5. Ensure that gate/cover is fully closed and locked.
6. House circuit may have tripped. 6. Check wall circuit breaker panel and reset if
necessary.
NOTICE:
As the equipment owner, you are responsible for the performance of the required maintenance listed in the
Maintenance section. It is recommended that you retain all receipts covering maintenance on your equipment.
Neglecting or failing to perform the required maintenance may increase emissions, decrease fuel efciency,
degrade performance, cause irreversible engine damage and/or void your warranty.
WARNING:
Always unplug the power cord before performing any adjustments, maintenance or repairs to your electric blower
vac.

15WWW.SENIXTOOLS.COM
WARRANTY
LIMITED TWO-YEAR WARRANTY
Additional Limitations
FOR TWO YEARS from the original date of retail purchase this Senix product is warranted against defects in
materials or workmanship on power tools and chargers. Defective product will receive free repair.*
FOR TWO YEARS from the original date of retail purchase this Senix product is warranted against defects in
materials or workmanship on batteries. Defective product will receive free repair.*
This warranty does not cover normal wear of parts and components such as cutting chain, line or blades nor does
this warranty cover product transportation cost for warranty or service.
Any implied warranty granted under state law, including warranties of merchantability or tness for a particular
purpose, are limited to three years from the date of purchase on power tools and chargers and seven years on
batteries. The manufacturer is not responsible for direct, indirect, incidental or consequential damages. Some
states and provinces do not allow limitations on how long an implied warranty lasts and/or do not allow the
exclusion or limitation of incidental damages, so the above limitations and exclusions may not apply to you. This
warranty gives you specic legal rights, and you may also have other rights which vary from state to state or
province to province.
The YAT USA declines any responsibility in regard to civil liability arising from abusive use or not in conformity with
proper use and maintenance of the machine as described in the operator’s manual.
YAT USA is not responsible for direct, indirect, incidental or consequential damages.
After the purchase, the manufacturer recommends proper maintenance of the machine and to read the operator’s
manual before using the machine.
*Original purchase receipt may be required for proof of purchase
For customer service contact us toll free at 1-800-261-3981 or Senixtools.com.
YAT USA, Inc. 9048 E Bahia Dr, suite 105, Scottsdale, AZ 85260.
To locate your nearest Senix service provider call toll free at 800-261-3981 or email us at [email protected].
Warranty is subject to the following conditions:
• Warranty applies to the original purchaser at retail and is not transferrable*
• Warranty Registration at www.senixtools.com
• The tool has not been misused, abused, neglected, altered, modied or repaired by anyone other than an
authorized service center
• Only genuine Senix accessories have been used with or on this product
• The tool has been subjected to normal wear and tear
• The tool has not been used for trade or professional purposes
• The tool has not been used for rental purposes
• This warranty only covers defects arising under normal usage and does not cover any malfunction, failure or
defect resulting from misuse, abuse (including overloading the product, exposure to water or rain) accidents,
neglect or lack of proper installation and improper maintenance or storage.