Serpent X20 24 User manual

1/10 SCALE ELECTRIC TOURING CAR

The Serpent X20′24 m E dius is a state of the art 1/10 scale 4WD touringcar which will give you the true
•
•
•
DIFF ASSEMBLY…………………………………………….………4
DJC ASSEMBLY……….............…………………………………6
CVD ASSEMBLY…………………………………….......…………7
FRONT & REAR ASSEMBLY…………………………….…….…...9
MOTORMOUNT ASSEMBLY……………….……………………...12
REAR ASSEMBLY………….…………………………………….…14
•
FRONT ASSEMBLY…………………………..………………………19
•
•
SOLID AXLE ASSEMBLY……….............………………………..5
•
•
•
ANTIROLLBAR ASSEMBLY…………………………………….....22
STEERING ASSEMBLY……………………..........……………...23
CENTRAL ASSEMBLY………………………........……………...26
SHOCK ASSEMBLY……………………………………........…...29
BUMPER ASSEMBLY…….........………………………………...32
FINAL ASSEMBLY…………………………………………..........34
EXPLODED VIEWS…………......………………………………...38
TEAM SERPENT NETWORK……………………………………....49
•
•
•
•
•
•
•
your Serpent X20′24 m
E dius Fine-tuning the initial setup is an essential part of building a high-performance
The exploded views and parts lists for the X20′24 m
E dius are presented in the Reference Guide
Front & Rear assembly

3
HOW TO USE THE MANUAL
Each step contains a variety of numbers, lines, and symbols. The numbers represent the order in
which the parts should be assembled. The lines are described below.
Each step contains a variety of symbols described below.
Assembly path of one item into another
Group of items (within lines) should be
assembled first
Direction the item should be moved
Glue one item to another
Press/Insert one item into another
Connect one item to another
Gap between two items
ICONS DESCRIPTIONLINES DESCRIPTION
Carefull, read and check very well.
Apply a small amount of cyano glue. Use wear protection for eyes and hands.
Detail view to explain assembly or order of parts better.
Default set-up: This symbol indicates the default setup.
Grease: apply a small amount of grease to the parts shown.
Left and right parts should be assembled in the same way.
Silicone oil: use the indicated silicone oil for the shocks and differentials.
Parts or items not included in the kit.
Optional part, not standard in the kit.
Thread lock: apply a small amount on the parts shown. Before to apply the threadlock,
make sure to degrease the parts very well, as otherwise the threadlock will not work.
Step number; the order in which you should
assemble the indicated parts
1 32
Length after assembly

12x15x0.25
12x15x0.25
12x15x0.25 4x8x0.2
1.1 1.2 1.3
M2.5x5
M2.5x55x8x2.5
M2.5x5
5x8x2.5
5x8x2.5
4x8x0.2 4x8x0.2
4x8x0.2
4
STEP 1 DIFF BAG
DIFF ASSEMBLY
Use a digital scale to measure the
exact amount of oil in the diff.
AMOUNT OF OIL IN
THE DIFFS
Differential weight with
volume compensators
= 8.4 grams

M2.5x8 M3x10
M2.5x8
M3x10 M3x10
1.4
5
STEP 1 STEP 2 SOLID AXLE BAG

3.3
1
2
2
11
1
1.5x7.8
1.5x7.8
1.5x7.8
1.5x4x2
1.5x4x2
1.5x7.8
2
3.1 3.2
1.5x4x2
402070 DJC driveshaft BB alu (2) All bearing cover on outside
1.5x4x2
2
2
DJC BAG
6
STEP 3
DJC ASSEMBLY

1
1
1.5x7.8
1.5x7.8
1.5x4x2
1.5x4x2
1.5x7.8
2
2
2
4.1 4.2
1.5x4x2
BAJ 1
CVD BAG
STEP 4
7
CVD ASSEMBLY

1
8

3x5x2
FRONT
5.3 REAR
M4x6
M4x6
M4x6
M4x6
M4x6
M2.5x5
M2.5x5
M2.5x5 M2.5x5
RL RR
FL FR
FRONT/REAR
5.1 5.2
PIVOTBALL M3x4 3x5x2 M2.5x5
402030 Wishbone stiffner carbon S (4) X20 '23
402032 Wishbone stiffner carbon H (4) X20 '23
STEP 5 BAG 1
FRONT &REAR ASSEMBLY
4X
9

M3x6 M3x6
6.2 REAR
M3x6 M3x6
FRONT
6.1
402024 suspension insert lw 0.5deg (4) X20 '23
STEP 6
10
Front 0 degree Front 1 degree toe out
Rear 1 degree toe inRear 0 degree

FRONT REAR
M3x6
M3x6
7.1 7.2
M3x6
M3x6PIVOTBALL M3x4
STEP 7
11
BAG 2

8.1 8.2
8.3
3X6X2.5 8x12x3.55x8x2.5 C-CLIP R9 M3x10
C-CLIP R9
1
2
5x8x2.5
M3x10
3x5x1.5
M3x6
3x6x6
3x5x1
3x6x2.5
3x6x6
M3x10
8x12x3.5
3x6x6 M3x6 3x5x1 3x5x1.5
STEP 8
MOTORMOUNT ASSEMBLY
12

10x15x4
M3x6
10x15x4
10x15x4
M3x6
9.1 9.2
401917 Bearing excenter fr/rr (4) alu X20
STEP 9
13

Lower arm 0 toe in Lower arm 1 toe in
Rear
5°
4°
3°
1°
2°
0°
1°
3°
2°
1°
0°
1°
2°
3°
REAR
M3x6
M3x6
10.1
10.2
3x6x0.5
3x6x0.5
PIVOTBALL M3x4
STEP 10 BAG 3
14
REAR ASSEMBLY

11.1 11.2
23.5mm
STEP 11
15
2X

M3x6
M3x6
6x10x3
6x10x3
M3x6
3x5x1
M3x5
6x10x3
M3x5 M3x6 M3x63x5x1
PIVOTBALL M3x4
STEP 12
16
R=L

13.1 13.3
13.2
O-RING 5x1
STEP 13
17
BAG 4
73.5mm

16mm
2X
STEP 14
18

Lower arm 0 toe,
caster angle:
Lower arm 1 toe,
caster angle:
0°
1°
2°
4°
3°
5°
6°
2°
3°
4°
5°
6°
7°
8°
Front
15.1
15.2
FRONT
M3x6
M3x6
3x6x0.5
PIVOTBALL M3x4
3x6x0.5
STEP 15
19
BAG 4
FRONT ASSEMBLY

6x10x3
6x10x3
M3x6
M3x8
M3x5
M3x8
M3x8
6x10x3
M3x5 M3x6M3x8
STEP 16
20