SET 1501 T Original operating instructions

SET 1501 T - 2501 T - 3501 T
SET 1501 H - 2501 H - 3501 H
QUICK INSTALLATION
en • de • fr • sv Rev. 1.2 • 2023-W38-4

2
It is the responsibility of the operator to read and understand this service manual and other
information provided and to use the correct operating procedure.
Read the entire manual before the initial start-up of the unit. It is important to know the cor-
rect operating procedures for the unit and all safety precautions to prevent the possibility of
property damage and/or personal injury.
It is the responsibility of the installer to ensure the conformity of all, not supplied cables
towards national regulations.
Der Benutzer muss dieses Servicehandbuch und weitere bereitgestellte Informationen gel-
esen und verstanden haben und ist für den ordnungsgemäßen Betrieb verantwortlich.
Vor der ersten Inbetriebnahme des Geräts das ganze Handbuch durchlesen. Die Verfahrens-
weisen für einen ordnungsgemäßen Betrieb des Geräts und alle Sicherheitsvorkehrungen
müssen bekannt sein, um Sachschäden und/oder Verletzungen zu vermeiden.
Der Installateur ist dafür verantwortlich, dass alle verwendeten Kabel, die nicht Teil des Liefer-
umfangs sind, den nationalen Vorschriften entsprechen.
Il relève de la responsabilité de l’opérateur de lire et de comprendre le présent manuel
d’entretien, ainsi que les autres informations fournies et d’utiliser la procédure opérationnelle
appropriée.
Il convient de lire entièrement le manuel avant le démarrage initial de l’unité. Il est important
de connaître les procédures opérationnelles adaptées à l’unité, ainsi que toutes les précau-
tions de sécurité an de prévenir tous les dommages matériels et/ou corporels éventuels.
Il relève de la responsabilité de l’installateur d’assurer la conformité de tous les câbles non
fournis avec les réglementations nationales.
Operatören ansvarar för att läsa och förstå denna servicehandbok och annan information
som tillhandahålls, samt att använda enheten på rätt sätt.
Läs igenom hela handboken innan enheten startas för första gången. Det är viktigt att känna
till hur enheten används på rätt sätt och vilka säkerhetsåtgärder som måste vidtas för att sak-
och/eller personskador ska undvikas.
Installatören ansvarar för att säkerställa att samtliga, inte bara medföljande, kablar uppfyller
lokala bestämmelser.
en
de
fr
sv
2

3
SET (T)
SET (H)
8
SET (T)
13
SET (H)
SET (T)
15
SET (H)
OFF
OFF
OFF
5
3

4
Download full version
https://support.dantherm.com
?
!
4

5
OFF
SET (T)
308
SET 3501 T - 1488
SET 2501 T - 1154
SET 1501 T - 1004
695
434,2
59,2
308
SET 3501 T - 1488
SET 2501 T - 1154
SET 1501 T - 1004
695
434,2
59,2
308
SET 3501 T - 1488
SET 2501 T - 1154
SET 1501 T - 1004
695
434,2
59,2
1
5

6
OFF
2
2x
3
2%
!
SET (T)
6

7
OFF
4
SET (T)
13
5
7

8
OFF
SET (H)
i
Surface appearance according to reference
g
SCALE: NOT TO SCALE
351516
351516
MATERIAL:
THICKNESS: WEIGHT:
REV. BY:
DATE:
REF.:
DATE:
PART NO REV.:
REV.:
PARTNO
table LZT 142 0001, categoryprocess equipment and is only entended as a guide.
CDP-T Small
CDP-T Small
8
Sheetmetal flatstate is based on Dantherm Air Handling A/S
All designs originated by Dantherm Air Handling A/S are the
property of said Company and will be protected by Patents.
This Drawing is furnished with the understanding that the
essence there of will not be reproduced in whole or in part
without written authorization by Dantherm Air Handling A/S.
Linear dimensions without tolerances according to
DS/EN 22768-1 medium. Angular dimensions without tolerances: ± 1°
V
431
59
Ø3/4”
700
294
307
80
W89
73 80 426 36
Surface appearance according to reference
g
SCALE: NOT TO SCALE
351516
351516
MATERIAL:
THICKNESS: WEIGHT:
REV. BY:
DATE:
REF.:
DATE:
PART NO REV.:
REV.:
PARTNO
table LZT 142 0001, categoryprocess equipment and is only entended as a guide.
CDP-T Small
CDP-T Small
8
Sheetmetal flatstate is based on Dantherm Air Handling A/S
All designs originated by Dantherm Air Handling A/S are the
property of said Company and will be protected by Patents.
This Drawing is furnished with the understanding that the
essence there of will not be reproduced in whole or in part
without written authorization by Dantherm Air Handling A/S.
Linear dimensions without tolerances according to
DS/EN 22768-1 medium. Angular dimensions without tolerances: ± 1°
V
431
59
Ø3/4”
700
294
307
80
W89
73 80 426 36
Surface appearance according to reference
g
SCALE: NOT TO SCALE
351516
351516
MATERIAL:
THICKNESS: WEIGHT:
REV. BY:
DATE:
REF.:
DATE:
PART NO REV.:
REV.:
PARTNO
table LZT 142 0001, categoryprocess equipment and is only entended as a guide.
CDP-T Small
CDP-T Small
8
Sheetmetal flatstate is based on Dantherm Air Handling A/S
All designs originated by Dantherm Air Handling A/S are the
property of said Company and will be protected by Patents.
This Drawing is furnished with the understanding that the
essence there of will not be reproduced in whole or in part
without written authorization by Dantherm Air Handling A/S.
Linear dimensions without tolerances according to
DS/EN 22768-1 medium. Angular dimensions without tolerances: ± 1°
V
431
59
Ø3/4”
700
294
307
80
W89
73 80 426 36
8

9
OFF
SET 1501 H SET 2501 H SET 3501 H
Y437 341 450
SET (H)
1
Warning
Caution
Y
Y
9

10
OFF
SET 1501 H SET 2501 H SET 3501 H
Z610 760 1095
SET (H)
2
68
110
110
Z
395
Warning
Caution
SET (H) wall duct
Instruction
?
Wall duct for CDP 40T-50T-70T
INSTRUCTION
Rev. 1.2 • 2019-W38-5
dcba
10

11
OFF
SET (H)
3
4
2%
!
11

12
OFF
SET (H)
5
Warning
Caution
12

13
OFF
SET (T) + SET (H)
ab
01:0000
Hour Sec.Min.
7
6
13

14
OFF
8
2,5 mm
Min Ø9
Max Ø18
SET (T) + SET (H)
9
14

15
OFF
Warning
Caution
OFF
ON
SET (T) + SET (H)
a
b
a
a
b
15

16
OFF
SET (T) + SET (H)
3 sec.
58
Example
OK
12
16

109320
109320
SET Energietechnik GmbH
A.-Blessing-Str. 5
DE-71282 Hemmingen
Tel. [phone] – 94 54 10
Fax [phone] – 23 37
www.set-energietechnik.de
[email protected]
SET Energietechnik GmbH can accept no responsibility for possible errors and changes (en)
Irrtümer und Änderungen vorbehalten (de)
SET Energietechnik GmbH n’assume aucune responsabilité pour erreurs et modications éven-
tuelles (fr)