Drieaz LGR 7000XLI User manual

SETUP
Place the dehumidifier in the damp area.
Close doors and windows to
limit moisture entering from
surrounding areas.
Remove drain hose from pocket, un-
coil and lay the hose flat on the floor.
Attach “quick connect” end of hose to
back of dehumidifier. Place open end
securely in a suitable drain.
Remove cord from cord pocket, uncoil,
and plug one end into the base of the
unit. Plug the other end into an outlet
on a 15 or 20 amp circuit.
OPERATION
Press ON/OFF to turn the unit on.
The unit automatically pumps out
water at least every six minutes.
OTHER FUNCTIONS
DISPLAY MENU.Press to display air
inlet and outlet conditions, and display
settings. To return to the main menu,
press the ON/OFF key once. OVER
Operating the LGR 7000XLi Dehumidier

AFTER USING
Press ON/OFF to turn unit off.
Press PURGE to remove any
remaining water from the unit.
Unplug cord, coil and place in cord
pocket. Drain out any remaining
water in the drain hose, coil it, and
place it in the hose pocket.
SEE OWNER’S MANUAL FOR IMPORTANT SAFETY INFORMATION AND
OPERATING INSTRUCTIONS.
CONTINUED...
Go to HD.drieaz.com
for instructional videos and user guides.
Or call 800-932-3030 for technical support
To maintain a constant humidity level, press button to reach
HUMIDISTAT, then press arrow to set desired humidity level.
MENU SELECTION. Press to change display settings, such
as the display language.
PURGE. Press to empty water from the pump reservoir.
The display will read PUMP PURGING with a countdown.
TURN OFF AND UNPLUG UNIT WHEN MOVING THE UNIT
OR CHANGING FILTERS.