Seville Classics SHE16210B User manual

Model #: SHE16210B
Thank you for choosing Seville Classics! We hope that you enjoy your
organizer cart. Please read through this user guide for parts list,
assembly instrucons, frequently asked quesons and contact info.
Large 10-Drawer Organizer Cart
FAQs
Q. How big is it?
A. Unit measures 15.5" W x 15.4" D x 38.2" H
Q. Can I use it without the casters?
A. No, the cart is not designed to be used without the casters.
Q. How much weight can it hold?
A. Weight capacity per drawer: 3.3 lbs. (1.5 kgs)
Weight capacity on top shelf: 16.5 lbs. (7.5 kgs)
Total weight capacity: 49.5 lbs. (22.5 kgs)
12-2017
Customer Service Informaon
Telephone: [phone]
Fax: [phone]
Hours: 8:30 AM – 4:30 PM (PST)
Email: [email protected]
Homepage: www.SevilleClassics.com
STEP 4. Insert Drawers
Slide the DRAWERS (D) into the channels and
clip the SHELF (C) onto the crossbars.
Congratulaons!
Enjoy your new organizer cart!
12-2017

Please make sure you have all the parts on this list.
If you’re missing parts, contact us for replacements at
[phone] or send an email to [e-mail]
Assembly Instrucons
STEP 1. Aach Casters
Make sure channels on each
SIDE FRAME (A) face each other.
Push the SLEEVES (E) into the
boom poles of SIDE FRAME (A).
Push CASTERS (F) and LOCKING
CASTERS (G) into the SLEEVES (E).
Repeat for other SIDE FRAME (A).
STEP 2. Aach Crossbars
Fit a WASHER (I) between SIDE
FRAME (A) and CROSSBAR (B).
Flat side of washer MUST sit in end
crossbar. Curved side of washer
MUST t against side frame.
Screw BOLT (H) through outer bolt
holes on a SIDE FRAME (A) and
into CROSSBAR (B).
Tighten bolts with Allen Wrench
(L) unl snug.
Repeat for remaining bolt holes.
STEP 3. Assemble Drawers
Aach DRAWER PULL KNOBS (K) to
all DRAWERS (D) with SCREWS (J)
and screwdriver.
B. Crossbar (4)
C. Shelf (1)
D. Drawer (10)
E. Sleeve (4)
F. Caster (2)
G. Locking caster (2)
H. Bolt (8)
I. Washer (8)
J. Screw (10)
K. Drawer Pull Knob (10)
L. Allen Wrench
Parts List
A. Side frame (2)