Seville Classics SHE16228 User manual

Customer Service Informaon
Telephone: [phone]
Fax: [phone]
Hours: 8:30 AM – 4:30 PM (PST)
Email: Suppor[email protected]
Homepage: www.SevilleClassics.com
112020
Specicaons
Dimensions: 14" W x 17.75" D x 6.375" H
Weight capacity: 50 lbs.
Weight: 7 lbs.
Mounng Instrucons (to wire shelf)
STEP 1.
Posion DRAWER (A) on
UltraDurable wire shelf.
STEP 2.
Align BRACKET (C) with
mounng holes on DRAWER
(A) and aach with MACHINE
SCREWS (D).
STEP 3.
Aach all 4 BRACKETS (C).
NOTE! UltraDurable Commercial-Grade Pull-Out Sliding Steel Wire Cabinet Organizer
Drawer is compable with all 18 inch deep UltraDurable Commercial-Grade shelving.
Commercial-Grade Pull-Out Sliding
Steel Wire Cabinet Organizer Drawer
Model: WEB520, SHE16228
Thank you for choosing Seville Classics! We hope that you enjoy your new steel
pull-out drawer. Please read through this user guide for parts list, assembly
instrucons, frequently asked quesons and further contact informaon.
112020

Parts List
A. Drawer (1)
Please make sure you have all the parts on this list.
If you’re missing parts, contact us for replacements at
[phone] or send an email to [e-mail]
Screwdriver
Required Tools (not included)
1
Power Drill
B. Mounng Template (1)
C. Bracket (4)
D. Bracket screws (8)
E. Wood screws (10)
Mounng Instrucons (to cabinet)
2
STEP 1.
Place the MOUNTING
TEMPLATE (B) onto your
shelf or cabinet.
IMPORTANT: Make sure
there is room to close the
door without it touching the
template.
Lightly secure with tape, and
drill 10 pilot holes through
the template into the shelf.
STEP 2.
Remove the MOUNTING
TEMPLATE (B).
Send WOOD SCREWS (E)
through DRAWER (A) frame
and into pilot holes with
screwdriver.
Install screws to front and
back of DRAWER (A).