
Introducon
Thank you for having chosen our company’s bubble machine. Please read this user manual carefully before installing the device.
By following the suggesons found in this manual, you can look forward to the reliable and sasfactory performance of bubble
machine for years to come.
Specicaons
Model: SFB-1000
Voltage: AC220-240V, 50hz/60Hz
Power: 300W
Motor: AC12V/45RPM*2
Fluid Tub Volume: 3.0L
Fluid Consumpon (approx): 4.8L/H
Coverage: 300M2
G. W. : 13.0Kgs
Packaging volume (mm): 620 * 480 * 540
Control: Wireless remote control
UNPACKING & INSPECTION
Open the shipping carton and verify that call equipment necessary to operate the system has arrived intact. Included with
your SFB-1000 Bubble Machine should be the following items:
1. This user manual.
2. Power cord.
3. Wireless remote control (Remote control receiver plate built-in).
*Bubble uid sold separately.
If any advice is missing, contact your dealer immediately. Before beginning inial setup of your bubble machine, make sure
that there is no evident damage caused by transportaon.
In the event that the unit’s housing or cable is damaged, do not plug it in and do not aempt to use it unl aer contacng to
your dealer for assistance.
SETUP
1. Remove all packing materials from shipping box, check that all foam and plasc is Removed.
2. Place bubble machine on a at surface. Fill with bubble liquid or other high-quality water-based bubble liquid. Any other
types of liquid can damage the unit.
OPERATION
1. Put the machine on a level place and then pour bubbles uid into the basin of the machine. Connect the power supply.
2. To use the wireless control: turn on the switch, press the transmier in your hand, and now the machine works.
3. Please let the bubble uid out from exit at the back side of the machine if the machine is not used for long, and then
power o.
MAINTENANCE
Cleaning your bubble machine regularly will help reduce costly parts replacement and repair charges.