
Log End Table Assembly Instructions
A.) Table Top 1pc
D.) Side Panel 2pcs
E.) Long Support Bar 2pcs
F.) Short Support Bar 3pcs
ADDITIONAL DETAILS / WARNINGS:
WARNING: CHOKING HAZARD- Contains small parts- keep parts and packaging away from children
and pets.
WARNING: Do not sit or stand on table.
Read and understand all warnings, cautions, assembly, installation and use instructions prior to
assembling, installing or using this product. Failure to follow all warnings, cautions and instructions may
result in serious injury or damage to personal property.
Confirm all parts are present before assembly. If any part is missing, cracked or damaged, please
contact Sportsman's Guide customer service before assembly.
Assemble product on a soft surface (like the cardboard box) to protect from scratching or damaging the
item and other surfaces
Tools required (not included): Philips screwdriver
At least two people are recommended for safe assembly and installation of this product.
Once assembled, make sure the product is placed on a firm, level surface.
NEVER exceed the weight limit of 180 pounds (80kgs).
To avoid injury, periodically check all screws for tightness during usage and check hardware for
signs of wear and possibly metal fatigue that may require repair or replacement.
Solid wood such as this has knots and cracking which are normal and should be considered an
enhancement to the natural beauty of this product.
PARTS LIST
B.) Back Leg 2pcs
Left & Right
G.) Screw 28pcs
STEP ONE
Attach the three Short Support Bars (F) into the Long Support Bars (E)
and secure both sides in place using Six Screws (G).
C.) Front Leg 2pcs
Left & Right
!
!