Ercol Shalstone 80311508 User manual

YNG TAL 14 / ESMT3 D: 08.07.2015 / RN 005.
Thank you for purchasing this Shalstone dressing table. Please read the instructions carefully before use to
ensure safe and satisfactory operation of this product
The fıttings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG
CHILDREN.
This product is HEAVY, it should be assembled as near as possible to the point of use.TAKE CARE
WHEN LIFTING to avoid personal injury and (or) damage to the product.
Please check the pack contents before attempting to assemle this product. full checklist of components is
given in this leaflet. If any components are missing, please contact the retailer from whom you bought this
product.
Pre
-
assemb y preparation
Please ensure instructions are read in full before attempting to assemble this product.
This item is
HEAVY
Shalstone dressing table
Stock numbers 80311508
Necessary
Too s
This product is product takes approximately 20 MINUTES TO assemble with 2 PEOPLE.
Thank you for purchasing this Shalstone dressing table. Please read the instructions carefully before use to
ensure safe and satisfactory operation of this product
The fıttings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG
CHILDREN.
This product is HEAVY, it should be assembled as near as possible to the point of use.TAKE CARE
WHEN LIFTING to avoid personal injury and (or) damage to the product.
Please check the pack contents before attempting to assemle this product. full checklist of components is
given in this leaflet. If any components are missing, please contact the retailer from whom you bought this
product.
Pre
-
assemb y preparation
Please ensure instructions are read in full before attempting to assemble this product.
This item is
HEAVY
Shalstone dressing table
Stock numbers 80311508
Necessary
Too s
This product is product takes approximately 20 MINUTES TO assemble with 2 PEOPLE.
Page 1 of 8

Stretcher Rail x 1
Allen head bolt yellow (M6.35) x 6
2
3
4
5
A
1 Mirror Frame x 1
arcass x 1
L/H End Frame x 1
R/H End Frame x 1
Adjustable buffer x 2
B
D
E
F
G
Allen head bolt yellow (M6.60) x 2
Allen Key (4) x 1
Screw (3,5mm x 16mm) x 1
Textile Strap ( 15 cm ) x 1
Wedges x 2
1
2
3
4
5
Fittings and parts checklist
Page 2 of 8

2. Attach the adjustable buffers on both legs.
4
1. With the aid of an assistant, carefully locate stretcher rail between the legs, then turn clockwise
direction to fix them as shown. Make sure that stretcher rail screws are colour-matched with metal
inserts on legs and it is important that screws are inserted simultaneously . ( Do not tighten stretcher rail at
first, to have enough flexibility to attach legs to the carcass on step 4 )
5
3
4
3
G
G
G
Step by step assembly instructions
Page 3 of 8

3. With the aid of an assistant, carefully turn the carcass upside-down on an appropriate surface as shown.
C
A
4. With the aid of an assistant carefully locate legs on carcass as shown. Firts screw 6x Allen head bolts by
using Allen key provided. Then screw 2x Allen head bolts from back of the carcass as shown. Finally tighten
stretcher rail by hand.
A
A
4
3
2
2
C
B
5
5
BB
Page 4 of 8

6. Unscrew the screws of 4x handles from back of the drawer front, then attach them to the front of the
drawer front with same screws by using screwdriver as shown.
5. With the aid of an assistant carefully turn the carcass on its feet and position it in its final place. Then
locate mirror frame on mirror assembly slots as shown. Note that legs have flexibility tolerance and you may
be able to adjust the distance of slots by pushing the legs inwards or pulling them outwards to fit to the
mirror frame slots as shown.
1
3
4
Page 5 of 8

7. Use the adjustable buffers to tilt mirror in the back and front direction. The more these are screwed out
the more tilted the mirror will be. Assembly is now complete.
Page 6 of 8

Wall fixing
-
if in doubt seek professional advice
Wood
If fixing to wood make sure
that it isn't chipboard as
screws can easily pull away
from the core structure
Brick or Masonry
Use an appropriate wall plug
provided you are sure your
wall is sound
Cavity wall
Special toggle wall plugs are
needed. Seek expert advice
1
. Screw the textile strap on to the back of the item at centre point using pilot hole and short screw
provided. Position the item against the wall where you want it to go
2. Attach the textile straps using screws suitable for your type of wall see Wall fixings above.
3
. If the cabinet is not level on your floor use the wedges provided, and snap them off so that they
do not protrude out from the cabinet's legs, you can also snap them lengthways if desired.
D
E
Page 7 of 8

Care and Maintenance
Wood Furniture
Wood displays different grain patterns depending on which way it is cut
-
for example, the 'medullary ray'
which can appear on oak furniture is a mark of good quality timber - these are just characteristics of the
natural beauty of wood. Some furniture is also deliberately aged and rustic.
All timber surfaces will change colour and mellow over time. New furniture will initially vary in shade from
items that have been previously purchased.
How to care for your wood furniture
Furniture with a hard lacquer, wax polish or painted surface should be dusted with a dry cloth. When using the
surface for serving food and drinks it is best to use protective mats and coasters. Spillages should be wiped up
as soon as possible.
Spray polishes are best avoided as they contain silicones which may spoil the furniture's surface by building up
over time. Use of cleaning materials containing abrasive compounds, acidic or caustic reagents and any bleaches
containing oxidising reagents should be avoided as prolonged use may damage the lacquer surface. Wipe up
spills immediately. If sticky marks occur on the surface they can be removed with a dilute solution of warm
soapy water. The offending area should be rubbed lightly and then completely dried immediately afterwards,
before replacing any mats etc.
Our furniture will endure most temperatures in the home but it is best to avoid placing furniture next to heat
sources such as radiators or fires. Be particularly careful with solid wood as the lack of humidity caused by
central heating can cause damage such as warping.
PLEASE KEEP THESE INSTRU TIONS FOR FUTURE REFEREN E
Never drag furniture when moving it, always lift it. Please take care when handling or moving the furniture as
careless handling may cause damage or injury. No liability will be acepted for damage or injury caused by
incorrectly installed furniture.
Safety Instructions
Ercol Furniture Ltd, Summerleys Road, Princes Risborough, Buckinghamshire. HP 7 9PX www.ercol.com
Page 8 of 8