SH Scientific SH-FU-50TH-WG User manual

1
SH-FU-50/80/100/120TH-WG
1500°C
TUBE FURNACE
Gas Flow Package
Version : 2020 Rev.0

Table of Contents
Keep this manual on-hand so it can be used by all operators of the unit.
Use the unit only in the way described in this manual.
Failure to follow the instruction in this manual may cause wrong
operation.
1. General Description …………………………………………………………3
2. Graphic Symbols ………………………………………………………………4
3. The Outward …………………………………………………………………5
4. Key Feature ……………………………………………………………………6
5. Installation ………………………………………………………………………7
6. Setting and Operation …………………………………………………… 11
7. Specification ………………………………………………………………… 16

3
Thank you for purchasing our product. We know that in today's competitive
marketplace, customers have many choices when purchasing laboratory
equipments.
We appreciate your choosing our quality product. We stand behind our
products and want to let you know we are here if you need us.
Before you use the unit, read this entire manual carefully to understand how to
install, operate and maintain the unit in a safe manner.
Your satisfaction with the unit will be maximized as you read this manual
thoroughly.
Our capable products will satisfy you by the best performance with easy
operation.
01. General Description

4
BE SURE THAT YOU UNDERSTAND ALL OF THESE SYMBOLS BEFORE
OPERATING THE UNIT.
Important operating and / or maintenance instruction.
Read the accompanying text carefully.
This symbol indicates items and procedures that are STRICTY
PROHIBITED with regards to the unit.
Potential electrical hazards.
Explosive.
No disassemble.
Flammable.
Hot surface or steam.
02. Graphic Symbols

5
<50/80/100/120TH >
03. The Outward

6
04. Key Feature
• Digital display of temp and time
• Multi key-in (100Ω(DIN Pt100Ω),
KPt100Ω(JPt100Ω), K(CA))
• Precise temperature control
• Alarm when timer ends
• Auto back up
• Over-temperature protection
function(FU-xxTG)
• Separated body and control box design
protecting from thermal shock(FU-xxTG)

7
05. Installation

8
<Fig-1>
Refer to above fig-1, level the equipment by adjusting the feet.
Serial label shows the electric power specification of the unit.
Connect power and turn on the main switch(E.L.B).
Please do not raise up it high temp at once.
It case to decline durability.
We recommend raise temp under 15℃/min
05. Installation

9
05. Installation
-How to use assemble pipe lines
1) Please check if all parts are in the package;
-1 panel of 1 Flow meter and valve,
-3 pipe lines with nuts,
-1 Gas gauge with valve
Fig-3) In case of Pipe parts for 2 gas channels; 1 panel of 2 Flow-meters and valves, 4 pipe
lines with nuts, 1 Gas gauge with valve.
Fig-3)
Fig-2)

10
05. Installation
2) Screw down the panel of flow meter and valve, connect 3 pipe lines each(Fig-4, -5, -6).
Tighten the each bolt and nut with spanner.
Fig-4)
Fig-5)
Fig-6)

11
06. Setting and Operation
1) Controller

12
06. Setting and Operation

13
06. Setting and Operation

14
06. Setting and Operation

15
06. Setting and Operation

16
07. Specifications
1500℃ Tube Furnace Gas Flow Package - 50/80/100/120TH-WG

Memo

Memo

Memo