Shademaker Athens Base User manual

13401 Brooks Drive
Baldwin Park, CA 91706
p 626.338.8810
f 626.338.8816
[email protected]
shademakerusa.com
©2021 Shademaker. All rights reserved. SMOM-BTT100-0621
Safety and Precauctions
• To reduce risk of personal injury in which a person is injured or harmed, and/or damage
to personal property, read and follow the Assembly Guide prior to assembling and
operating umbrella and base.
• Close and store the umbrella in windy conditions or when a storm approaches. Never
 allowtheumbrellatoapinthewind;thiscouldcausepersonalinjury,damagetopersonal
property, damage to umbrella and/or umbrella canopy. Do not use tilting function (if
applicable) during windy conditions.
• Keep umbrella secured to umbrella base at all times.
• Do not leave open umbrella unattended. If damage occurs, this is not covered by the
warranty.
• When adjusting the umbrella, make sure that no person(s), item(s) or personal property are
close to the umbrella. This is important to prevent injury or material damage.
• Do not allow children to play on or with umbrella or umbrella base.
• Whenadjustingorassemblingtheumbrellaorumbrellabase,makesurengers,toes
or any other parts of the body are clear from moving parts. Failing to do so many result in
serious injury.
For warranty information, please visit www.shademakerusa.com.

A- (1) Base Stem with Self-Adjusting Base Clamp
B- (1) Base with Wheels
C- (4) Bolts
D- (1) 5mm Hexagon Wrench
1
CHECKLIST
ABC
2
Assemble Base
• Carefully remove base from carton and place in desired location.
• Attach stem to base with provided (4) bolts (Fig. 1). Tighten using 5mm hexagon
wrench.
(Fig. 1)
IMPORTANT:
Prior to assembly it is important to decide on the location of the umbrella.
• Allow ample height to avoid damage to your umbrella during assembly and usage.
• Choose a location that is level and sturdy.
• Avoid any sloping of soft ground.
Secure Umbrella
• Insert umbrella into base stem (Fig. 2).
• Tighten self-adjusting base clamp by turning clockwise to secure umbrella in place
(Fig. 3).
NOTE: Self-adjusting clamp on base stem may loosen over time, especially when being
moved. Simply tighten clamp during use of umbrella.
Moving Base
• To move base to another location, slightly tilt umbrella and base back onto its 2 wheels.
(Fig. 4). While holding umbrella, carefully roll base to new desired location.
NOTE: Move with caution. Make sure umbrella is in closed position and free of objects
before moving base to prevent personal injury or property damage.
D
(Fig. 2) (Fig. 3)
(Fig. 4)

A- (1) Base Stem with Self-Adjusting Base Clamp
B- (1) Base with Wheels
C- (4) Bolts
D- (1) 5mm Hexagon Wrench
1
CHECKLIST
ABC
2
Assemble Base
• Carefully remove base from carton and place in desired location.
• Attach stem to base with provided (4) bolts (Fig. 1). Tighten using 5mm hexagon
wrench.
(Fig. 1)
IMPORTANT:
Prior to assembly it is important to decide on the location of the umbrella.
• Allow ample height to avoid damage to your umbrella during assembly and usage.
• Choose a location that is level and sturdy.
• Avoid any sloping of soft ground.
Secure Umbrella
• Insert umbrella into base stem (Fig. 2).
• Tighten self-adjusting base clamp by turning clockwise to secure umbrella in place
(Fig. 3).
NOTE: Self-adjusting clamp on base stem may loosen over time, especially when being
moved. Simply tighten clamp during use of umbrella.
Moving Base
• To move base to another location, slightly tilt umbrella and base back onto its 2 wheels.
(Fig. 4). While holding umbrella, carefully roll base to new desired location.
NOTE: Move with caution. Make sure umbrella is in closed position and free of objects
before moving base to prevent personal injury or property damage.
D
(Fig. 2) (Fig. 3)
(Fig. 4)

13401 Brooks Drive
Baldwin Park, CA 91706
p 626.338.8810
f 626.338.8816
[email protected]
shademakerusa.com
©2021 Shademaker. All rights reserved. SMOM-BTT100-0621
Safety and Precauctions
• To reduce risk of personal injury in which a person is injured or harmed, and/or damage
to personal property, read and follow the Assembly Guide prior to assembling and
operating umbrella and base.
• Close and store the umbrella in windy conditions or when a storm approaches. Never
 allowtheumbrellatoapinthewind;thiscouldcausepersonalinjury,damagetopersonal
property, damage to umbrella and/or umbrella canopy. Do not use tilting function (if
applicable) during windy conditions.
• Keep umbrella secured to umbrella base at all times.
• Do not leave open umbrella unattended. If damage occurs, this is not covered by the
warranty.
• When adjusting the umbrella, make sure that no person(s), item(s) or personal property are
close to the umbrella. This is important to prevent injury or material damage.
• Do not allow children to play on or with umbrella or umbrella base.
• Whenadjustingorassemblingtheumbrellaorumbrellabase,makesurengers,toes
or any other parts of the body are clear from moving parts. Failing to do so many result in
serious injury.
For warranty information, please visit www.shademakerusa.com.