Safavieh Outdoor Granton PAT7054D-4BX User manual

NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
Part List and Hardware List
A
B
C
D
EAllen key
PIECE DESCRIPTION PICTURE QUANTITY Model# PAT7054A
Product Dimensions: 34.25" W x 34.25" D x 12.60" H
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
LG4
8.5x20x2mm
M8x65 mm
Frame Table
Leg Table
Bolt
Washer
1X
4X
12X
12X
1X

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
1 2
Step 1
Complete.
Step 2
C
DD
C
C
E
A
B
B
B
B
Place the Table top (A) with its underside skywards onto a clean,
soft surface to avoid any scratch or damage to the product.
Ax loosely the Legs (B) into the mounting position at the corners of the
Table Top (A), using the Bolts (C) with Flat Washers (D), with the Allen Key(E),
as shown in the picture.

NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
Part List and Hardware List
A
B
C
D
E
Seat Frame
Leg Frame
Back frame
Allen key
4X
1X
1X
1X
PIECE DESCRIPTION PICTURE QUANTITY
Model# PAT7054A
Product Dimensions:29.13" W x 54.72" D x 27.16" H
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
LG4
F
F1
G
H
I
K
Cushion Seat
Cushion Back
Bolt
M8x65
M8X35
12X
2X
2X
12X
8X
8X
chair
Bolt
Inset Nut M8X15
M8.5/20X15
Washer
1X
1X
1X
M
L
Side frame
Cushion Side
Pillow

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
12
Step 1
Attach leg frame (A) to Frame seat (D) ,use Bolt (H) and Washer (l),tighten
with allen
key (M).
Tighten Bolt (I) and Insert nut (K) with allen key (M) to attach seat frame
(D) and back frame (B), side frame (C).
Step 2
H
L
L
H
A
A
A
A
D
D
A
A
A
A
A
D
M
I
K
C
B
D
A
A
AB
C
D
A
A
A

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
34
Step 3
Attach cushion seat and cushion back, Side cushion. Complete
Step 4
E
F
F
F1
G

NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
Part List and Hardware List
A
B
C
D
E
E1
Seat Frame
Leg Frame
Back frame
Allen key
4X
1X
1X
1X
PIECE DESCRIPTION PICTURE QUANTITY
Model# PAT7054A
Product Dimensions:26.27" W x 29.92" D x 30.71" H
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
LG4
F
G
H
I
K
Cushion Seat
Cushion Back
Bolt
M8x65
M8X35
12X
2X
1X
1X
12X
4X
4X
chair
Bolt
Inset Nut
M8X15
M8.5/20X2
Washer
Pillow

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
12
Step 1
Attach leg frame (A) to Frame seat (C) ,use Bolt (F) and Washer (I),tighten
with allen
key (K).
Tighten Bolt (G) and Insert nut (H) with allen key (K) to attach seat frame
(C) and back frame (B)
Step 2
F
I
I
F
k
G
G
H
A
A
A
AC
A
A
A
A
C
C
A
A
A
A
B
C
C
C
B
B
A
A
A
F,G,H

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
34
Step 3
Attach cushion seat and cushion back Complete
Step 4
D
E
E1

NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
Part List and Hardware List
A
B
C
D
E
E
Seat Frame
Leg Frame
Back frame
Allen key
4X
1X
1X
1X
PIECE DESCRIPTION PICTURE QUANTITY
Model# PAT7054A
Product Dimensions:29.13" W x 51.18" D x 27.16" H
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
LG4
F
G
H
I
K
Cushion Seat
Cushion Back
Bolt
M8x65
M8X35
12X
2X
1X
12X
4X
4X
chair
Bolt
Inset Nut M8X15
M8.5/20X2
Washer
1 Pillow 2X

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
12
Step 1
Attach leg frame (A) to Frame seat (C) ,use Bolt (F) and Washer (I),tighten
with allen
key (K).
Tighten Bolt (G) and Insert nut (H) with allen key (K) to attach seat frame
(C) and back frame (B)
Step 2
F
I
I
F
A
A
A
A
C
C
A
A
A
A
A
C
K
A
A
AA
B
C
G
H
A
A
A
B
C