Courtyard Creations KLS521M-WM User manual

17KAA0101----Y4
HEX.KEY WRENCH 4MM
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
KLS521M-WM
PARTS LIST
PART
NO. MATERIAL CODE PART Q’TY
1 1
1
2
1
2
3
4
5 8
4
8
8
1
6
7
8
9
57
8
57
1
2
8
PAGE 1 OF 2 COURTYARD CREATIONS INC.
Use the correct bolts as indicated. Do not tighten any of the bolts until is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and
fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by
children. Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
SERVICE CENTER TOLL FREE NO.
TEL: [phone]
FAX: [phone]
!
!
!
!
!
FIGURE 1
Step 1:
Place the back assembly (#2) onto a non-abrasive
surface, such as a carpet, with its holes facing upwards.
Fasten the seat assembly (#1) to the back assembly (#2)
by using bolts (#5) and washers (#7). Keep the bolts
loose. See Figure 1.
17C33A0722001Y4
17C17A0403001Y4
62KLS521DQ101
BOLT M6*14
SCREW ST4.2*12
17FA05040301-Y4
WASHER d6.5*D13*1.0
18000337004
BOLT CAP
KLS521M-CS04-6
47LA66140
KLS521M-CS04-5
LEG
SEAT ASSEMBLY
BACK ASSEMBLY
SUPPORT
You will need the following tools:
- Phillips Screwdriver (Not included)
- Hex. Key Wrench (See Part #9)
STOP DON’T RETURN TO STORE!

PAGE 2 OF 2
FIGURE 2
FIGURE 4
FIGURE 3
Step 2:
Fasten the legs (#3) to the seat assembly (#1) by using
bolts (#5) and washers (#7). Keep the bolts loose.
See Figure 2.
Step 3:
Fasten the support (#4) to the back assembly (#2) and
the legs (#3) by using screws (#6). Make sure that all
of the bolts have been tightened completely and cover
them with bolt caps (#8). See Figure 3.
Step 4:
Turn the chair to its upright position. See Figure 4.
Cleaning and Maintenance
• Wash frame parts with mild soap and water, rinse
thoroughly, and dry completely. Do not use bleach,
acid, or other solvents on the frame parts.
• We recommend the use of furniture covers when not
in use.
• Inspect and tighten all bolts and fasteners on a regular
basis to ensure proper performance and safety of your
chair.
• In order to prolong the life and beauty of your chair,
we recommend that it be stored in a dry and protected
area during off season periods.
Note:
To ensure proper assembly, the label marked “A” on the
back assembly (#2) should coincide with the label
marked “A” on the support (#4).
Note:
The position of the legs (#3) in the Illustration Ais not
allowed.
A
571
4
6
2
3
3
2
8
57
8
3
3
A
A
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
STOP!
MissingAPart?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
Call Toll Free:
TEL: [phone]
FAX: [phone]
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THEPARTSLISTED.
IF YOU DO NOTLOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTSTHAT MAYHAVEBECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCEANYDIFFICULTYDURING ASSEMBLYOR IF ANY
PARTS ARE MISSING OR DAMAGED,CALL THE HELP LINE AT
1-877-539-7436 BEFORERETURNING THIS ITEM TO THESTORE.
PROVIDE THEFOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THEPRODUCT.
2-PARTNUMBER AND MATERIAL CODE OF THE PARTFROM THE PARTS
LIST.
MOST PROBLEMSCAN BERESOLVED WITHOUT RETURNING THIS
PRODUCT TO THERETAILER.
STOP DON’T RETURN TO STORE!