Shark DUOCLEAN HZ400UKT User manual

HZ400UK_Series_QSG_MP_190611_Mv1
Please be sure to read the enclosed Shark® instructions prior to using your unit.
A Lift-Away® Pod
B Wand
C Floor Nozzle
D Accessory Holder
E 20cm Crevice Tool
F Dusting Brush
G Pet Turbo Brush
(Certain Models Only)
A S SE M B LY
TIPS
EMPTYING THE DUST CUP
BRUSHROLL MAINTENANCE
Empty the dust cup after each use.
MAINTENANCE:
Rinse pre-motor filters
every month and HEPA
filter once a year.
Rinse with cold water
only. Allow filters to
air-dry completely
before reinstalling.
See enclosed
Instructions for more
information on how
to clean and replace
the filters.
Attach the accessory holder
(D) onto the wand and place
accessories on the holder.
Lift the floor nozzle tube, pushing it firmly
until it stands upright, then insert the wand
into the tube.
Brushroll access
The self-cleaning brushroll
automatically removes hair
wrap. If some hair or debris
remains after continued
use, remove the cover to
access the brushroll. Use
a coin to turn the locks
counterclockwise, then lift
off the cover. Remove any
debris or hair wrap and
clear the debris intake.
To close, push down the
cover until it clicks into
place, then turn the locks
clockwise.
Soft Roller
Slide the button on the floor
nozzle to eject the Soft Roller.
Tap off debris and wipe the
roller clean with a dry towel.
clean
QUICK START GUIDE
When storing, wrap cord
around cord hooks.
For quick cord access,
rotate upper hook down
and remove cord.
When the vacuum is placed
in the upright position,
the retractable wheels will
extend so the vacuum
can stand up on its own.
NOTE: For proper operation, ensure all parts
are firmly CLICKED into place.
C
A
B
(Click)
(Click)
G
(Snap)
DUOCLEAN® CORDED STICK VACUUM
WITH ANTI HAIR WRAP TECHNOLOGY
D E F

Step on the footprint icon on the floor nozzle and
tilt the handle back, then press the power button
on the back of the handle.
For even more flexibility with the wand, slide the
hose cuff down to extend the integrated hose.
NOTE: When finished with the hose, slide the hose
cuff back into place while reattaching the wand to
the pod.
For more reach, detach the wand and add an accessory.
Step on the wand release pedal and lift the handle.
To clean with the Lift-Away pod, detach it by pressing
the Pod Release button. Attach an accessory for more
reach. For added flexibility, slide the cuff down to
extend the hose. To reattach the hose, slide the hose
cuff back into place.
NOTE: During reassembly, ensure the hose is clicked
securely into place before attaching the wand.
OR
VERSATILE FLOOR-TO-CEILING CLEANING
UPRIGHT
WAND WITH EXTENDED HOSE
ABOVE-FLOOR WITH WAND
LIF T-AWAY® POD WITH HOSE
Power Button
Step on Nozzle
For questions or to register your product, contact us at 0800 862 0453 visit us online at sharkclean.eu
For additional parts and accessories,
visit sharkclean.eu
©2019 SharkNinja Operating LLC. All rights reserved. Made in China.
SHARK, DUOCLEAN and LIFT-AWAY are registered trademarks of SharkNinja Operating LLC.
@sharkcleaninguk @sharkcleanuk @sharkcleanuk