Sharp ViewCam VL-NZ100S User manual

VIDEOKAMERA MED FLYTANDE KRISTALLSKÄRM
CAMCORDER COM VISOR DE CRISTAL LÍQUIDO
LIQUID CRYSTAL DISPLAY CAMCORDER
MANUAL DE OPERAÇÃO
BRUKSANVISNING
OPERATION MANUAL
VL-NZ100S
SVENSKA ENGLISH
PORTUGUÊS

ENGLISH
Before using the camcorder, please read this operation manual carefully,
especially page vii.
ENGLISH
OPERATION MANUAL
WARNING
TO PREVENT SHOCK
HAZARD, DO NOT EXPOSE
THIS APPLIANCE TO RAIN
OR MOISTURE.
This equipment should be used with
the recommended AC adapter or
battery pack.
CAUTION
To prevent electric shocks and fire
hazards, do NOT use any other power
source.
CAUTION
To prevent shock, do not open the
cabinet. No user serviceable parts
inside. Refer servicing to qualified
dealer or service centre.
Important:
Audio-visual material may consist of
copyrighted works which must not be
recorded without the authority of the
owner of the copyright. Please refer to
relevant laws in your country.
Power supply:
This unit can be operated by
connecting it to either the AC adapter
or battery pack. The AC adapter
incorporates the AUTO VOLTAGE (AC
110–240 V, 50/60 Hz) function.
NOTE
The LCD panel of this camcorder is a very high technology product with more than
120,000 thin-film transistors*, giving you fine picture detail. Occasionally, a pixel may
appear on the screen as a fixed point of blue, green, red, or black. Please note that
this does not affect the performance of your camcorder.
Trademarks
• Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
• DPOF is a trademark of CANON INC., Eastman Kodak Company, Fuji Photo Film Co., Ltd. and
Matsushita Electric Industrial Co., Ltd.
• All other brand or product names are registered trademarks or trademarks of their respective
holders.
*Specifications are subject to change without notice.

i
Quick Operation Guide
Please consult this operation manual
further for details on these and other
functions of your camcorder.
Attaching the Battery
Pack
1Make sure that the Power
switch is set to OFF.
2Align the =mark on the side of the
battery pack with the =mark on the
camcorder (1), and slide the battery
pack in the direction of the arrow
completely until it locks into place (2).
Charging the Battery
Pack
1Attach the battery pack on the
camcorder, and make sure that the
Power switch is set to OFF.
2Connect the supplied power cord to the
AC power socket on the AC adapter, and
insert the AC plug into a power outlet.
3Insert the DC plug into the DC input
jack.
• The charge indicator lights up.
• The charge indicator turns off when the
battery is charged.
4Remove the DC plug from the DC input
jack, then remove the AC plug from the
power outlet.
Charge indicator
DC input jack
Power switch
To power
outlet
AC power socket

ii
Inserting a Cassette
1Attach the power source to the
camcorder, then slide the cassette
compartment door release and open the
cassette compartment door.
• After confirmation sound, the cassette
holder extends and opens automatically.
2Insert a commercially available cassette
fully with the window facing outwards,
and with the erasure protect tab facing
upwards.
3Press the Wmark gently until the
cassette holder clicks into place.
• After confirmation sound, the cassette
holder retracts automatically.
4Wait for the cassette holder to fully
retract. Close the compartment door by
pressing the centre until it clicks into
place.
SAVE
REC
Inserting a Card
You can use an SD Memory Card or a
MultiMediaCard for storing still images.
1Make sure that the Power switch is set
to OFF.
2Slide the card slot cover release and
open the card slot cover in the direction
of the arrow.
3Insert a card into the slot as shown
below, and push it in as far as it will go.
4Close the card slot cover.
Note:
•You cannot use a SmartMedia™ card or
Memory Stick™ media. In this operation
manual, “card” refers to the SD Memory Card
or the MultiMediaCard.
Cassette compartment
door release
Erasure protect tab
“W” mark
Card slot cover release
Label
Clipped corner
Write-protect
switch